SIST EN 6096:2019
(Main)Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
This European standard specifies general characteristics of spherical plain bearings in corrosion
resisting steel with self-lubricating liner, extra wide inner ring, inch series.
They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.
Luft- und Raumfahrt - Gelenklager mit selbst schmierender Beschichtung, extra breitem Innenring aus korrosionsbeständigem Stahl - Maße und Belastungen - Inch Reihe
Série aérospatiale - Rotule à garniture autolubrifiante avec bague intérieure extra large en acier résistant à la corrosion - Dimensions et charges - Série en inches
Aeronavtika - Zglobni drsni ležaj s samomazalno oblogo, z zelo velikim notranjim obročem iz korozijsko odpornega jekla - Mere in obremenitve - Palčne mere
Ta standard določa splošne karakteristike zglobnih drsnih ležajev iz korozijsko odpornega jekla s samomazalno oblogo, z zelo velikim notranjim obročem, palčne mere.
Namenjeni so za uporabo v fiksnih ali premikajočih se delih ogrodja letala in nadzornih mehanizmih.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 6096:2019
01-julij-2019
Aeronavtika - Zglobni drsni ležaj s samomazalno oblogo, z zelo velikim notranjim
obročem iz korozijsko odpornega jekla - Mere in obremenitve - Palčne mere
Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner
ring in corrosion resisting steel - Dimensions and loads - Inch series
Luft- und Raumfahrt - Gelenklager mit selbst schmierender Beschichtung, extra breitem
Innenring aus korrosionsbeständigem Stahl - Maße und Belastungen - Inch Reihe
Série aérospatiale - Rotule à garniture autolubrifiante avec bague intérieure extra large
en acier résistant à la corrosion - Dimensions et charges - Série en inches
Ta slovenski standard je istoveten z: EN 6096:2019
ICS:
21.100.10 Drsni ležaji Plain bearings
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 6096:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 6096:2019
---------------------- Page: 2 ----------------------
SIST EN 6096:2019
EN 6096
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.035
English Version
Aerospace series - Bearing, spherical plain with self-
lubricating liner, extra wide inner ring in corrosion
resisting steel - Dimensions and loads - Inch series
Série aérospatiale - Rotule lisse, à garniture Luft- und Raumfahrt - Gelenklager mit
autolubrifiante, bague intérieure extra large en acier selbstschmierender Beschichtung, extra breitem
résistant à la corrosion - Dimensions et charges - Série Innenring aus korrosionsbeständigem Stahl - Maße
en inches und Belastungen - Inch-Reihe
This European Standard was approved by CEN on 5 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6096:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 6096:2019
EN 6096:2019 (E)
Contents
Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 5
4 Requirements . 6
4.1 Configuration, dimensions, tolerances and mass . 6
4.2 Surface roughness . 6
4.3 Material . 11
4.4 Surface treatment . 11
4.5 Swaging groove . 11
4.6 Liner technology . 11
4.7 Loads . 12
4.8 Starting torque values . 13
4.9 Temperature range . 13
5 Designation. 14
6 Marking . 14
7 Technical specification . 14
8 Quality management system . 14
Annex A (informative) Standard evolution form . 15
Bibliography . 16
2
---------------------- Page: 4 ----------------------
SIST EN 6096:2019
EN 6096:2019 (E)
European foreword
This document (EN 6096:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 6096:2019
EN 6096:2019 (E)
Introduction
This document is published at edition P2. Former P1 and drafts may exist of Airbus development only
but without any ASD-STAN official publication. In consequence configuration management
discrepancies with these unofficial documents are under Airbus responsibility.
4
---------------------- Page: 6 ----------------------
SIST EN 6096:2019
EN 6096:2019 (E)
1 Scope
This European standard specifies general characteristics of spherical plain bearings in corrosion
resisting steel with self-lubricating liner, extra wide inner ring, inch series.
They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2030, Aerospace series — Steel X105CrMo17 (1.3544) — Hardened and tempered — Bars —
D ≤ 150 mm
e
EN 2133, Aerospace series — Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa,
copper, copper alloys and nickel alloys
EN 2424, Aerospace series — Marking of aerospace products
EN 2755, Aerospace series — Bearing, spherical plain in corrosion resisting steel with self-lubricating
liner — Elevated load at ambient temperature — Technical specification
EN 3161, Aerospace series — Steel FE-PM3801 (X5CrNiCu17-4) — Air melted, solution treated and
precipitation treated, bar a or D ≤ 200 mm, R ≥ 930 MPa
m
ISO 1132-1, Rolling bearings — Tolerances — Part 1: Terms and definitions
ISO 8075, Aerospace — Surface treatment of hardenable stainless steel parts
TR 4475, Aerospace series —Bearings and mechanical transmissions for airframe applications —
1
Vocabulary
3 Terms, definitions and symbols
For the purposes of this document, the terms and definitions given in TR 4475 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at http://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
1 Published as ASD-STAN Technical Report at the date of publication of this European standard by AeroSpace
and Defence industries Association of Europe – Standardization (ASD-STAN) (see www.asd-stan.org).
5
---------------------- Page: 7 ----------------------
SIST EN 6096:2019
EN 6096:2019 (E)
Symbols of limit deviations are in accordanc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.