SIST EN 4539-2:2020

Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations -Wide series - Dimensions and loads - Inch series

This document specifies the characteristics of spherical plain bearing in corrosion resistant steel, with self-lubricating liner, wide series, elevated load under low oscillations applications. They shall be used in the temperature range -55 °C to 163 °C.

Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, hohe Belastung bei geringer Drehbewegung, breite Reihe - Maße und Belastungen; Teil 2: Inch Reihe

Diese Europäische Norm legt die allgemeinen Eigenschaften von Gelenklagern aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, breite Serie, für Anwendungen mit hoher Belastung bei geringer Drehbewegung, fest.
Sie müssen im Temperaturbereich von -55 °C bis 163 °C verwendet werden.

Série aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante - à charge élevée sous faibles oscillations - Série large - Dimensions et charges - Partie 2 : Série en inches

La présente norme européenne spécifie les caractéristiques des rotules lisses en acier résistant à la corrosion à garniture autolubrifiante, série large, pour les applications à charge élevée sous faibles oscillations.
Les températures d’utilisation doivent être comprises entre -55 °C et 163 °C.

Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo - Z zvišano obremenitvijo pri nizkih oscilacijah - Široka serija - Mere in obremenitve - Palčne mere

Ta dokument določa značilnosti kroglastega drsnega ležaja iz korozijsko odpornega jekla s samomazalno oblogo, široke serije in z zvišano obremenitvijo pri nizkih nihanjih. Uporabljati jih je treba v temperaturnem razponu od –55 °C do 163 °C.

General Information

• Status: Published
• Publication Date: 17-Nov-2019
• ICS: 21.100.10 - Plain bearings
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Nov-2019
• Due Date: 09-Jan-2020
• Completion Date: 18-Nov-2019
• Ref Project: EN 4539-2:2019 - Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4539-2:2020
01-januar-2020
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno
oblogo - Z zvišano obremenitvijo pri nizkih oscilacijah - Široka serija - Mere in
obremenitve - Palčne mere
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-
lubricating liner - Elevated load under low oscillations -Wide series - Dimensions and
loads - Inch series
Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit
selbstschmierender Beschichtung, hohe Belastung bei geringer Drehbewegung, breite
Reihe - Maße und Belastungen; Teil 2: Inch Reihe
Série aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante -
à charge élevée sous faibles oscillations - Série large - Dimensions et charges - Partie 2
: Série en inches
Ta slovenski standard je istoveten z: EN 4539-2:2019
ICS:
21.100.10 Drsni ležaji Plain bearings
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 4539-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4539-2:2020

---------------------- Page: 2 ----------------------
SIST EN 4539-2:2020


EN 4539-2
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 49.035
English Version

Aerospace series - Bearing, spherical, plain, in corrosion
resisting steel with self-lubricating liner - Elevated load
under low oscillations - Wide series - Dimensions and
loads - Part 2: Inch series
Série aérospatiale - Rotules lisses, en acier résistant à Luft- und Raumfahrt - Gelenklager aus
la corrosion à garniture autolubrifiante - À charge korrosionsbeständigem Stahl mit selbstschmierender
élevée sous faibles oscillations - Série large - Beschichtung - Hohe Belastung, gering oszillierend -
Dimensions et charges - Partie 2 : Série en inches Breite Reihe - Maße und Belastungen - Teil 2: Inch-
Reihe
This European Standard was approved by CEN on 2 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4539-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4539-2:2020
EN 4539-2:2019 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Symbols and definitions . 4
4 Required characteristics . 5
5 Designation. 9
6 Marking . 9
7 Technical specification . 9
8 Quality management system . 10



2

---------------------- Page: 4 ----------------------
SIST EN 4539-2:2020
EN 4539-2:2019 (E)
European foreword
This document (EN 4539-2:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 4539-2:2020
EN 4539-2:2019 (E)
1 Scope
This European standard specifies the characteristics of spherical plain bearing in corrosion resistant
steel, with self-lubricating liner, wide series, elevated load under low oscillations applications.
They shall be used in the temperature range −55
...