59.120.10 - Spinning, twisting and texturing machines

ISO 368:2017 specifies the dimensions (length and inner diameter) and permissible total run-out tolerances of tubes with taper 1:38 and 1:64 for ring-spinning, doubling and twisting spindles used in the textile industry. It also specifies the dimensions and tolerances of the gauges for checking the tubes.

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

ISO 96-1:2016 specifies the principal dimensions of T- and SF-rings, and the mass and tolerance on the mass, of the appropriate travellers for flange rings employed on ring spinning and ring twisting machines. It also specifies the method of designation of the travellers.

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

ISO 18600:2015 defines terms of the card with a web-forming method using staple fibres for non-woven machinery.

ISO 18599:2015 specifies the dimensions and execution of strips for water nozzle solidification including their designation.

This Part 2 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2187 for: - opening, cleaning, blending; - wool scouring; - baling;...view more

2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

ISO 21485:2013 establishes a vocabulary of terms related to, and the principles of construction of, draw frames and their components, used for cotton spinning in the textile industry.

ISO 16853:2010 specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans according to ISO 1101.