ISO 18599:2015

Textile machinery and accessories — Strips for water jet solidification

ISO 18599:2015 specifies the dimensions and execution of strips for water nozzle solidification including their designation.

Matériel pour l'industrie textile — Bandes pour solidification du jet d'eau

General Information

• Status: Published
• Publication Date: 15-Sep-2015
• ICS: 59.120.10 - Spinning, twisting and texturing machines
• Technical Committee: ISO/TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories
• Drafting Committee: ISO/TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 22-Apr-2021

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18599
First edition
2015-09-15
Textile machinery and accessories —
Strips for water jet solidification
Matériel pour l’industrie textile — Bandes pour solidification du jet
d’eau
Reference number
ISO 18599:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 18599:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18599:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Symbols of dimensions . 1
3 Dimensions . 3
3.1 Jet strips . 3
3.2 Nozzle. 3
3.3 Distance of nozzle rows . 3
4 Specifications . 4
4.1 Straightness and parallelism of jet strips . 4
4.2 Hardness of jet strips . 4
5 Designation of jet strips . 4
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 18599:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details
...