ISO 18600:2015

Textile machinery and accessories — Web roller cards — Terms and definitions

ISO 18600:2015 defines terms of the card with a web-forming method using staple fibres for non-woven machinery.

Matériel pour l'industrie textile — Non-tisseé cardes à hérissons — Terminologie

General Information

• Status: Published
• Publication Date: 05-Nov-2015
• ICS: 01.040.59 - Textile and leather technology (Vocabularies)
• ICS: 59.120.10 - Spinning, twisting and texturing machines
• Technical Committee: ISO/TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories
• Drafting Committee: ISO/TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 22-Apr-2021

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18600
First edition
2015-10-15
Textile machinery and accessories —
Web roller cards — Terms and
definitions
Matériel pour l’industrie textile — Non-tisseé cardes à hérissons —
Terminologie
Reference number
ISO 18600:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 18600:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18600:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Terms and definitions . 1
2.1 Basic terms . 1
2.2 Width dimensions . 2
2.3 Technological terms . 3
2.4 Machine components . 3
2.4.1 Feed unit. 4
2.4.2 Breast unit . 4
2.4.3 Transfer unit . 5
2.4.4 Main cylinder unit . 5
2.4.5 Take-off unit . 6
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 18600:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 72, Textile machinery and accessories,
Subcommittee SC 1, Spinning preparatory, spinning, twisting and winding machinery and accessories.
iv © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 18600:2015(E)
Textile machinery and accessories — Web roller cards —
Terms and definitions
1 Scope
This International Standard defines terms of the card with a web-forming method using staple fibres
for non-woven machinery.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1 Basic terms
2.1.1
web roller card
machine for mechanical web formation with at least two working rollers for opening fibre tufts and for
producing unconsolidated textile fabric
[SOURCE: web (2.3
...