73.100.40 - Haulage and hoisting equipment

Transfer of CEN WI 00196019 to ISO/TC 82 Mining under the Vienna Agreement (ISO lead).
CEN WI 00196019 "Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles" relates to ISO Reference ISO/CD 19296 (EN 1889-1) Mining and Earthmoving Machinery - Mobile machines working underground - Machine Safety shall be transfered to ISO/TC 82 Mining under the Vienna Agreement (ISO lead). Otherwise there will be the risk of conflicting requirements in Eur...view more

This document specifies the safety requirements for self-propelled mobile machines used in underground mining, as defined in 3.1.
This document deals with hazards, hazardous situations and hazardous events (see Annex B) relevant to these machines when they are used as intended or under conditions of misuse reasonably foreseeable by the manufacturer.
For utility/service/support machines, this document only includes provisions to address the risks associated with the mobility (movement of the wh...view more

1.1   This European Standard specifies the safety requirements and tests for self-propelled rubber tyred vehicles as defined in 3.1 intended primarily for use in underground mining (i.e. as mine vehicles) and other underground workings (e.g. as tunnelling vehicles). The electrical supply voltage is limited to 1100 A.C. and 1500 D.C.
1.2   This European Standard deals with all significant hazards, hazardous situations and hazardous events, applying to self-propelled, rubber-tyred vehicles, subject t...view more

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives).
1.1   This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authoris...view more

1.1   This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains.
This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls...view more

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives).
1.1   This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authoris...view more

1.1   This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains.
This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls...view more

This International Standard specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183-1. This International Standard does not include requirements for plastics covers. These will need to be agreed upon by the manufacturer and purchaser, taking into account the type of plastics to be used. Related items that are not requirements of this In...view more

ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.

ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.

Specifies: a) the dimensional tolerances; b) the mechanical characteristics; c) the conditions with which coatings, if any, shall comply; d) the conditions of sampling and control. Applies to round, bright or zinc-coated wires of nominal diameters between 1 mm and 3,5 mm.

Specifies: a) the dimensional characteristics; b) the mechanical characteristics; c) the conditions with which coatings, if any, shall comply; d) the conditions of sampling and control. Applies to round, bright or zinc-coated wires of nominal diameters between 0,8 mm and 3,5 mm. This second edition cancels and replaces the first edition (1981).

Specifies those properties of ropes and of their component parts which form a basis for acceptance. Does not apply to full-lock coil ropes, balance ropes and flat ropes used in mines. The characteristics of the wire to be used for the manufacture of these ropes are not covered. Annex A gives an example of a works certificate; annex B gives an example of a full works certificate.This second edition cancels and replaces the first edition (1976).

Specifies the nature and properties of impregnating compounds and lubricants together with the corresponding test methods. Annex A tabulates suggested qualification and quality control tests. Annex B describes suggested test methods.

Specifies the nature and properties of the components together with the corresponding test methods. Describes the determination of water-soluble acids, the salt content, and the extractable content (dry matter and water content) as well as the expression of results.

This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of connector units. Each unit consists of the following components: shackle type connector, connector bolt, connector nut. It does not indicate a complete design, but it gives sufficient detail to ensure dimensional compatibility with chains complying with ISO 610 and scraper bars complying with ISO 5612.

Gives guidance on methods of verifying sprocket dimensions specified in ISO 5613. Specifies those dimensions which should be measured to ensure compatibility between chain and sprocket.

Specifies the requirements for a range of sprocket assemblies for use in twin outboard chain assemblies. These assemblies incorporate sprocket rings designed to accept chains complying with ISO 610, shackle type connectors complying with ISO 1082, and scraper bars complying with ISO 5612. It tabulates the dimensions and the figures illustrate shapes and reference quantities of concern. An annex gives design formulae.