ASTM D5063-90(1998)

Standard Guide for Use of Certification of Coating Conformance Form

SCOPE
1.1 This certification of coating conformance form provides procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order (see Fig. 1).
1.2 The completed form can be utilized to help evaluate the acceptability of the paint being furnished.

General Information

• Status: Historical
• Publication Date: 09-Oct-1998
• ICS: 25.220.20 - Surface treatment
• Technical Committee: D01 - Paint and Related Coatings, Materials, and Applications
• Drafting Committee: D01.45 - Marine Coatings

Relations

• Replaced By: ASTM D5063-90(2004) - Standard Guide for Use of Certification of Coating Conformance Form
• Effective Date: 01-Jun-2004

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 5063 – 90 (Reapproved 1998)
Standard Guide for
Use of Certification of Coating Conformance Form
This standard is issued under the fixed designation D 5063; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope
CERTIFICATION OF COATING CONFORMANCE FORM Number:
Date:
1.1 This certification of coating conformance form provides
I. GENERAL TYPE AND DESCRIPTION:
procurement information concerning products being furnished
Generic Type:
in accordance with a specific coating specification and addi-
Manufacturer’s Designation:
Specification Number:
tional requirements contained in the purchase order (see Fig.
Formula Number:
1).
Number of Components:
1.2 The completed form can be utilized to help evaluate the
Component Identification (if applicable):
acceptability of the paint being furnished. Color:
II. BUYER INFORMATION:
2. Referenced Documents
Name and Address:
2.1 ASTM Standards:
D 16 Terminology for Paint, Related Coatings, Materials,
and Applications
Purchase Order Number:
Release Number (if applicable):
3. Instructions for Completing Certification Form
Part Number (if applicable):
Item Number (if applicable):
3.1 Use only known and industry accepted descriptions.
Stock Number (if applicable):
Standard definitions of terms relating to paint, varnish, lacquer,
III. SELLER INFORMATION:
and related materials are provided in Terminology D 16 (see
Name and Address:
Fig. 2).
3.2 The sections are self-explanatory. Applicable informa-
tion in Section II should be provided by the buyer. Applicable
information in Section III should be provided by the seller.
Seller’s Representative:
(Include Telephone Number)
3.3 For two-component coatings, separate forms should be
Batch Number:
provided for each component, if appropriate.
Lot No.:
Date of Manufacture:
4. Keywords
Date of Expiration of Certification:
4.1 certification form; conformance form
IV. CERTIFICATION:
This is to certify that the above material being furnished has been
manufactured in accordance with the specification and meets all specifica-
tion requirements contained in the above purchase order.
This guide is under the jurisdiction of ASTM Committee D-1 on Paint and
Related Coatings, Materials, and Applications and
...