ASTM B861-01

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

SCOPE
1.1 This specification covers the requirements for 26 grades of titanium and titanium alloy seamless pipe intended for general corrosion resisting and elevated temperature service as follows:
1.1.1 Grade 1—Unalloyed titanium, low oxygen,
1.1.2 Grade 2—Unalloyed titanium, standard oxygen,
1.1.3 Grade 3—Unalloyed titanium, medium oxygen,
1.1.4 Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.5 Grade 7—Unalloyed titanium plus 0.12 % to 0.25 % palladium, standard oxygen,
1.1.6 Grade 9—Titanium alloy (3 % aluminum, 2.5 % vanadium),
1.1.7 Grade 11—Unalloyed titanium plus 0.12 % to 0.25 % palladium, low oxygen,
1.1.8 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.9Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium), low oxygen,
1.1.10 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium), standard oxygen,
1.1.11 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium), medium oxygen,
1.1.12 Grade 16—Unalloyed titanium plus 0.04 % to 0.08 % palladium, standard oxygen,
1.1.13 Grade 17—Unalloyed titanium plus 0.04 % to 0.08 % palladium, low oxygen,
1.1.14 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.04 % to 0.08 % palladium),
1.1.15 Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.16 Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,
1.1.17 Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.18 Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI),
1.1.19 Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.20 Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,
1.1.21 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.22 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.08-0.14 % ruthenium),
1.1.24 Grade 29—Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08-0.14 % ruthenium),
1.1.25 Grade 33—Titanium alloy (0.4% nickel, 0.015% palladium, 0.025% ruthenium, 0.15% chromium), and
1.1.26 Grade 34—Titanium alloy (0.4% nickel, 0.015% palladium, 0.025% ruthenium, 0.15% chromium).
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 09-Nov-2001
• ICS: 77.150.50 - Titanium products
• Technical Committee: B10 - Reactive and Refractory Metals and Alloys
• Drafting Committee: B10.01 - Titanium

Relations

• Replaces: ASTM B861-00 - Standard Specification for Titanium and Titanium Alloy Seamless Pipe
• Effective Date: 10-Nov-2001
• Replaced By: ASTM B861-02 - Standard Specification for Titanium and Titanium Alloy Seamless Pipe
• Effective Date: 10-Oct-2002
• Referred By: ASTM F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials
• Effective Date: 10-Nov-2001
• Referred By: ASTM B363-19 - Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
• Effective Date: 10-Nov-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: B 861 – 01
Standard Specification for
1
Titanium and Titanium Alloy Seamless Pipe
This standard is issued under the fixed designation B 861; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 1.1.19 Grade 24—Titanium alloy (6 % aluminum, 4 %
vanadium) plus 0.04 % to 0.08 % palladium,
1.1 This specification covers the requirements for 26 grades
1.1.20 Grade 25—Titanium alloy (6 % aluminum, 4 %
of titanium and titanium alloy seamless pipe intended for
vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 %
general corrosion resisting and elevated temperature service as
palladium,
follows:
1.1.21 Grade 26—Unalloyed titanium plus 0.08 to 0.14 %
1.1.1 Grade 1—Unalloyed titanium, low oxygen,
ruthenium,
1.1.2 Grade 2—Unalloyed titanium, standard oxygen,
1.1.22 Grade 27—Unalloyed titanium plus 0.08 to 0.14 %
1.1.3 Grade 3—Unalloyed titanium, medium oxygen,
ruthenium,
1.1.4 Grade 5—Titanium alloy (6 % aluminum, 4 % vana-
1.1.23 Grade 28—Titanium alloy (3 % aluminum, 2.5 %
dium),
vanadium plus 0.08–0.14 % ruthenium),
1.1.5 Grade 7—Unalloyed titanium plus 0.12 % to 0.25 %
1.1.24 Grade 29—Titanium alloy (6 % aluminum, 4 %
palladium, standard oxygen,
vanadium, extra low interstitial, ELI plus 0.08–0.14 % ruthe-
1.1.6 Grade 9—Titanium alloy (3 % aluminum, 2.5 % va-
nium),
nadium),
1.1.25 Grade 33—Titanium alloy (0.4% nickel, 0.015%
1.1.7 Grade 11—Unalloyed titanium plus 0.12 % to 0.25 %
palladium, 0.025% ruthenium, 0.15% chromium), and
palladium, low oxygen,
1.1.26 Grade 34—Titanium alloy (0.4% nickel, 0.015%
1.1.8 Grade 12—Titanium alloy (0.3 % molybdenum,
palladium, 0.025% ruthenium, 0.15% chromium).
0.8 % nickel),
1.2 The values stated in inch-pound units are to be regarded
1.1.9 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ru-
as standard. The values given in parentheses are for informa-
thenium), low oxygen,
tion only.
1.1.10 Grade 14—Titanium alloy (0.5 % nickel, 0.05 %
ruthenium), standard oxygen,
2. Referenced Documents
1.1.11 Grade 15—Titanium alloy (0.5 % nickel, 0.05 %
2.1 ASTM Standards:
ruthenium), medium oxygen,
A 370 Test Methods and Definitions for Mechanical Testing
1.1.12 Grade 16—Unalloyed titanium plus 0.04 % to
2
of Steel Products
0.08 % palladium, standard oxygen,
E 29 Practice for Using Significant Digits in Test Data to
1.1.13 Grade 17—Unalloyed titanium plus 0.04 % to
3
Determine Conformance with Specifications
0.08 % palladium, low oxygen,
E 120 Test Methods for Chemical Analysis of Titanium and
1.1.14 Grade 18—Titanium alloy (3 % aluminum, 2.5 %
4
Titanium Alloys
vanadium plus 0.04 % to 0.08 % palladium),
E 1409 Test Method for Determination of Oxygen in Tita-
1.1.15 Grade 19—Titanium alloy (3 % aluminum, 8 %
nium and Titanium Alloys by the Inert Gas Fusion Tech-
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
5
nique
1.1.16 Grade 20—Titanium alloy (3 % aluminum, 8 %
E 1447 Test Method for Determination of Hydrogen in
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)
Titanium and Titanium Alloys by the Inert Gas Fusion
plus 0.04 % to 0.08 % palladium,
5
Thermal Conductivity Method
1.1.17 Grade 21—Titanium alloy (15 % molybdenum, 3 %
2.2 ANSI/ASME Standard:
aluminum, 2.7 % niobium, 0.25 % silicon),
6
B 36.19M-1985 Stainless Steel Pipe
1.1.18 Grade 23—Titanium alloy (6 % aluminum, 4 %
vanadium, extra low interstitial, ELI),
2
Annual Book of ASTM Standards, Vol 01.03.
1 3
This specification is under the jurisdiction of ASTM Committee B10 on Annual Book of ASTM Standards, Vol 14.02.
4
Reactive and Refractory Metals and Alloys and is the direct responsibility of Annual Book of ASTM Standards, Vol 03.05.
5
Subcommittee B10.01 on Titanium. Annual Book of ASTM Standards, Vol 03.06.
6
Current edition approved Nov. 10, 2001. Published January 2002. Originally Available from American National Standards Institute, 11 W. 42nd St., 13th
published as B 861 – 95. Last previous edition B 861 – 00. Floor, New York, NY 10036.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
B 861
3. Terminology with a continuous periphery in all stages of manufacture.
3.1 Definitions:
4. Ordering Information
3.1.1 lot, n—a number of pieces of pipe of the same
nominal size and wall thickness manufactured by the same
4.1 Orders for materials under this specification shall in-
process from a single heat
...