ASTM F594-98e1

Standard Specification for Stainless Steel Nuts

SCOPE
1.1 This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a number of alloys in common use and intended for service applications requiring general corrosion resistance.
1.2 Seven groups of stainless steel alloys are covered, including ten austenitic, two ferritic, four martensitic, and one precipitation hardening.Group AlloysAConditionB 1 304, 305, 304L, 384, 18-9LW, 302HQ(CW) cold workedD 2 316, 316L (CW) cold worked3 321, 347  (CW) cold worked4430 (CW) cold worked5 410(H) hardened and tempered 6431 (H) hardened and tempered7 630  (AH) aged hardened
AUnless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer (see 6.1 ).
BSee 4.2 for options.
CWhen approved by the purchaser, alloys 303, 303Se, or XM1 may be furnished.
DSizes 0.75 in. and larger may be hot worked and solution annealed.
EWhen approved by the purchaser, alloy 430F may be furnished.
FWhen approved by the purchaser, alloy 416 or 416Se may be furnished.
1.3 Supplementary requirements of an optional nature are provided, applicable only when agreed upon by the manufacturer and the purchaser at the time of the inquiry and order.
1.4 Suitable bolts, hex cap screws, and studs for use with nuts included in this specification are covered by Specification F 593. Unless otherwise specified, all bolts, hex cap screws, and studs used with these nuts shall conform to the requirements of Specification F 593 and shall be of the same alloy group.

General Information

• Status: Historical
• Publication Date: 09-Apr-2002
• ICS: 21.060.20 - Nuts
• Technical Committee: F16 - Fasteners
• Drafting Committee: F16.04 - Nonferrous Fasteners

Relations

• Replaces: ASTM F594-98 - Standard Specification for Stainless Steel Nuts
• Effective Date: 10-Apr-2002
• Replaced By: ASTM F594-01 - Standard Specification for Stainless Steel Nuts
• Effective Date: 10-Apr-2002
• Referred By: ASTM F1370-92(2019)e1 - Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
• Effective Date: 10-Apr-2002
• Referred By: ASTM F986-86(2022) - Standard Specification for Suction Strainer Boxes
• Effective Date: 10-Apr-2002
• Referred By: ASTM F1333-91(2019) - Standard Specification for Construction of Fire and Foam Station Cabinets
• Effective Date: 10-Apr-2002
• Referred By: ASTM F1718-01(2019) - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
• Effective Date: 10-Apr-2002
• Referred By: ASTM B745/B745M-15(2021) - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• Effective Date: 10-Apr-2002
• Referred By: ASTM F593-22 - Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
• Effective Date: 10-Apr-2002
• Referred By: ASTM B746/B746M-22 - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• Effective Date: 10-Apr-2002

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
e1
Designation: F 594 – 98
Standard Specification for
1
Stainless Steel Nuts
This standard is issued under the fixed designation F 594; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1
e NOTE—Table 1 was editorially corrected in October 2001.
2
1. Scope A 276 Specification for Stainless Steel Bars and Shapes
A 342 Test Methods for Permeability of Feebly Magnetic
1.1 This specification covers the requirements for stainless
3
Materials
steel nuts 0.25 to 1.50 in. in nominal diameter inclusive in a
A 380 Practice for Cleaning and Descaling Stainless Steel
number of alloys in common use and intended for service
2
Parts, Equipment, and Systems
applications requiring general corrosion resistance.
A 484 Specification for General Requirements for Stainless
1.2 Seven groups of stainless steel alloys are covered,
2
Steel Bars, Billets, and Forgings
including ten austenitic, two ferritic, four martensitic, and one
A 493 Specification for Stainless and Heat-Resisting Steel
precipitation hardening.
2
for Cold Heading and Cold Forging Wire
A B
Group Alloys Condition
A 555/A 555M Specification for General Requirements for
D
2
1 304, 305, 304L (CW) cold worked
Stainless and Heat-Resisting Steel Wire and Wire Rods
C
384, XM7
A 564/A 564M Specification for Hot-Rolled and Cold-
D
2 316, 316L (CW) cold worked
D
Finished Age-Hardening Stainless and Heat-Resisting
3 321, 347 (CW) cold worked
E D
2
4 430 (CW) cold worked
Steel Bars, Wire, and Shapes
F
5 410 (H) hardened and tempered
A 571 Specification for Austenitic Ductile Iron Castings for
6 431 (H) hardened and tempered
7 630 (AH) aged hardened Pressure-Containing Parts Suitable for Low-Temperature
4
A
Service
Unless otherwise specified on the inquiry and order, the choice of an alloy from
within a group shall be at the discretion of the fastener manufacturer (see 6.1).
A 582/A 582M Specification for Free-Machining Stainless
B
See 4.2 for options.
2
Steel Bars
C
When approved by the purchaser, alloys 303, 303Se, or XM1 may be
furnished. A 751 Test Methods, Practices, and Terminology for
D
2
Sizes 0.75 in. and larger may be hot worked and solution annealed.
Chemical Analysis of Steel Products
E
When approved by the purchaser, alloy 430F may be furnished.
5
F D 3951 Practice for Commercial Packaging
When approved by the purchaser, alloy 416 or 416Se may be furnished.
E 29 Practice for Using Significant Digits in Test Data to
1.3 Supplementary requirements of an optional nature are
6
Determine Conformance with Specifications
provided, applicable only when agreed upon by the manufac-
E 353 Test Methods for Chemical Analysis of Stainless,
turer and the purchaser at the time of the inquiry and order.
Heat-Resisting, Maraging, and Other Similar Chromium-
1.4 Suitable bolts, hex cap screws, and studs for use with
7
Nickel-Iron Alloys
nuts included in this specification are covered by Specification
F 593 Specification for Stainless Steel Bolts, Hex Cap
F 593. Unless otherwise specified, all bolts, hex cap screws,
8
Screws, and Studs
and studs used with these nuts shall conform to the require-
F 606 Test Methods for Determining the Mechanical Prop-
ments of Specification F 593 and shall be of the same alloy
erties of Externally and Internally Threaded Fasteners,
group.
8
Washers, and Rivets
2. Referenced Documents
F 1470 Guide for Fastener Sampling for Specified Mechani-
8
cal Properties and Performance Inspection
2.1 ASTM Standards:
9
2.2 ANSI/ASME Standards:
A 262 Practices for Detecting Susceptibility to Inter-
2
granular Attack in Austenitic Stainless Steels
3
Annual Book of ASTM Standards, Vol 03.04.
4
Annual Book of ASTM Standards, Vol 01.02.
1 5
This specification is under the jurisdiction of ASTM Committee F16 on Annual Book of ASTM Standards, Vol 15.09.
6
Fasteners and is the direct responsibility of Subcommittee F16.04 on Nonferrous Annual Book of ASTM Standards, Vol 14.02.
7
Fasteners. Annual Book of ASTM Standards, Vol 03.05.
8
Current edition approved Oct. 10, 1998. Published December 1998. Originally Annual Book of ASTM Standards, Vol 01.08.
9
published as F 594 – 78. Last previous edition F 594 – 91. Available from American National Standards Institute, 25 W. 43rd St., 4th
2
Annual Book of ASTM Standards, Vol 01.03. Floor, New York, NY 10036.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F 594
B1.1 Unified Inch Screw Threads 304, 304L, 305, 316, 316L, 321, 347, 384, XM1, and XM7) :
B18.2.2 Squa
...