ASTM B462-10

Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

ABSTRACT
This specification covers nickel-chromium-molybdenum-columbium (UNS N06625), nickel-chromium-molybdenum-silicon alloy (UNS N06219), and nickel-chromium-molybdenum-tungsten alloy (UNS N06650) in the form of hot-worked rod and bar and cold-worked rod. The matreial shall conform to the required chemical composition for carbon, manganese, silicon, phosphorus, sulfur, chromium, columbium, tantalum, cobalt, molybdenum, iorn, aluminum, titanium, copper, nickel, tungsten, and nitrogen. The materials shall conform to the the heat treatment and room temperature tensile properties such as tensile strength, yield strength, and elongation. Dimensions of the alloys such as diameter, thickness, or width, length and straightness shall also be determined.
SCOPE
1.1 This specification covers forged or rolled UNS N06030, UNS N06035, UNS N06022, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, UNS N06025, and UNS R20033* pipe flanges, forged fittings, and valves and parts intended for corrosive high-temperature service.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 30-Sep-2010
• ICS: 77.150.40 - Nickel and chromium products
• Technical Committee: B02 - Nonferrous Metals and Alloys
• Drafting Committee: B02.07 - Refined Nickel and Cobalt and Their Alloys

Relations

• Replaces: ASTM B462-06 - Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
• Effective Date: 01-Oct-2010
• Referred By: ASTM B366/B366M-23 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
• Effective Date: 01-Oct-2010

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B462 – 10
Standard Specification for
Forged or Rolled UNS N06030, UNS N06022, UNS N06035,
UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS
N08020, UNS N08024, UNS N08026, UNS N08367, UNS
N10276, UNS N10665, UNS N10675, UNS N10629, UNS
N08031, UNS N06045, UNS N06025, UNS R20033 Alloy Pipe
Flanges, Forged Fittings, and Valves and Parts for
1
Corrosive High-Temperature Service
This standard is issued under the fixed designation B462; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* A262 Practices for Detecting Susceptibility to Intergranular
2
Attack in Austenitic Stainless Steels
1.1 This specification covers forged or rolled UNS
B166 Specification for Nickel-Chromium-Iron Alloys
N06030, UNS N06035, UNS N06022, UNS N06200, UNS
(UNS N06600, N06601, N06603, N06690, N06693,
N06059, UNS N10362, UNS N06686, UNS N08020, UNS
N06025, N06045, and N06696)* and Nickel-Chromium-
N08024, UNS N08026, UNS N08367, UNS N10276, UNS
Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and
N10665, UNS N10675, UNS N10629, UNS N08031, UNS
Wire
N06045, UNS N06025, and UNS R20033* pipe flanges,
B335 Specification for Nickel-Molybdenum Alloy Rod
forged fittings, and valves and parts intended for corrosive
B408 Specification for Nickel-Iron-Chromium Alloy Rod
high-temperature service.
and Bar
1.2 The values stated in inch-pound units are to be regarded
B472 Specification for Nickel Alloy Billets and Bars for
as standard. The values given in parentheses are mathematical
Reforging
conversions to SI units that are provided for information only
B473 Specification for UNS N08020, UNS N08024, and
and are not considered standard.
UNS N08026 Nickel Alloy Bar and Wire
1.3 This standard does not purport to address all of the
B574 Specification for Low-Carbon Nickel-Chromium-
safety concerns, if any, associated with its use. It is the
Molybdenum, Low-Carbon Nickel-Molybdenum-
responsibility of the user of this standard to become familiar
Chromium,Low-CarbonNickel-Molybdenum-Chromium-
with all hazards including those identified in the appropriate
Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-
Material Safety Data Sheet (MSDS) for this product/material
Copper, and Low-Carbon Nickel-Chromium-
as provided by the manufacturer, to establish appropriate
Molybdenum-tungsten Alloy Rod
safety and health practices, and determine the applicability of
B581 Specification for Nickel-Chromium-Iron-
regulatory limitations prior to use.
Molybdenum-Copper Alloy Rod
2. Referenced Documents
B649 Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon
3
Alloys (UNS N08925, UNS N08031, UNS N08354, and
2.1 ASTM Standards:
UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS
R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS
1
This specification is under the jurisdiction of ASTM Committee B02 on
N08936) Wire
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee
B691 Specification for Iron-Nickel-Chromium-
B02.07 on Refined Nickel and Cobalt and Their Alloys.
Molybdenum Alloys (UNS N08366 and UNS N08367)
Current edition approved Oct. 1, 2010. Published October 2010. Originally
approved in 1967. Last previous edition approved in 2006 as B462 – 06. DOI:
Rod, Bar, and Wire
10.1520/B0462-10.
B880 Specification for General Requirements for Chemical
2
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
Check Analysis Limits for Nickel, Nickel Alloys and
cation SB-462 in Section II of that Code.
Cobalt Alloys
* NewdesignationestablishedinaccordancewithPracticeE527andSAEJ1086,
Practice for Numbering Metals and Alloys (UNS).
E8 Test Methods for Tension Testing of Metallic Materials
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
E527 Practice for Numbering Metals and Alloys in the
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Unified Numbering System (UNS)
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright ©ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B462 – 10
E1473 Test Methods for Chemical Analysis of Nickel, acceptable and unacceptable character of metal flow shall be a
Cobalt, and High-Temperature Alloys subject for agreement between the manufacturer and the
E1916 GuideforIdentificationand/orSegregationofMixed purchaser.
Lots of Metals 5.2.4 When specified in the order, the manufacturer shall
2.2 ANSI Standard: submit for approval of the purc
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:B462–06 Designation: B462 – 10
Standard Specification for
Forged or Rolled UNS N06030, UNS N06022, UNS N06035,
UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS
N08020, UNS N08024, UNS N08026, UNS N08367, UNS
N10276, UNS N10665, UNS N10675, UNS N10629, UNS
N08031, UNS N06045, UNS N06025, and UNS R20033 Alloy
Pipe Flanges, Forged Fittings, and Valves and Parts for
1
Corrosive High-Temperature Service
This standard is issued under the fixed designation B462; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
2
1.1 This specification covers forged or rolled UNS N06030, UNS N06035, UNS N06022, UNS N06200, UNS N06059, UNS
N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675,
UNS N10629, UNS N08031, UNS N06045, UNS N06025, and UNS R20033* pipe flanges, forged fittings, and valves and parts
intended for corrosive high-temperature service.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data
Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and
determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
B166 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045,
and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
B335 Specification for Nickel-Molybdenum Alloy Rod
B408 Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B472 Specification for Nickel Alloy Billets and Bars for Reforging
B473 Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B574 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-
Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Ttungsten Alloy Rod
B581 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B649 Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS
N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
B691 Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B880 Specification for General Requirements for Chemical CheckAnalysis Limits for Nickel, NickelAlloys and CobaltAlloys
E8 Test Methods for Tension Testing of Metallic Materials
1
ThisspecificationisunderthejurisdictionofASTMCommitteeB02onNonferrousMetalsandAlloysandisthedirectresponsibilityofSubcommitteeB02.07onRefined
Nickel and Cobalt and Their Alloys.
Current edition approved JuneOct. 1, 2006.2010. Published June 2006.October 2010. Originally approved in 1967. Last previous edition approved in 20042006 as
B462 – 046. DOI: 10.1520/B0462-106.
2
For ASME Boiler and Pressure Vessel Code applications see related Specification SB-462 in Section II of that Code.
* New designation established in accordance with Practice E527 and SAE J1086, Practice for Numbering Metals and Alloys (UNS).
3
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright ©ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B462 – 10
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E1473 Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:B462–06 Designation: B462 – 10
Standard Specification for
Forged or Rolled UNS N06030, UNS N06022, UNS N06035,
UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS
N08020, UNS N08024, UNS N08026, UNS N08367, UNS
N10276, UNS N10665, UNS N10675, UNS N10629, UNS
N08031, UNS N06045, UNS N06025, and UNS R20033 Alloy
Pipe Flanges, Forged Fittings, and Valves and Parts for
1
Corrosive High-Temperature Service
This standard is issued under the fixed designation B462; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
2
1.1 This specification covers forged or rolled UNS N06030, UNS N06035, UNS N06022, UNS N06200, UNS N06059, UNS
N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675,
UNS N10629, UNS N08031, UNS N06045, UNS N06025, and UNS R20033* pipe flanges, forged fittings, and valves and parts
intended for corrosive high-temperature service.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data
Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and
determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
B166 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045,
and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy
(UNS N06674) Rod, Bar, and Wire
B335 Specification for Nickel-Molybdenum Alloy Rod
B408 Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B472 Specification for Nickel Alloy Billets and Bars for Reforging
B473 Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B574 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-
Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Ttungsten Alloy Rod
B581 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B649 Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS
N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
B691 Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B880 Specification for General Requirements for Chemical CheckAnalysis Limits for Nickel, NickelAlloys and CobaltAlloys
1
ThisspecificationisunderthejurisdictionofASTMCommitteeB02onNonferrousMetalsandAlloysandisthedirectresponsibilityofSubcommitteeB02.07onRefined
Nickel and Cobalt and Their Alloys.
Current edition approved JuneOct. 1, 2006.2010. Published June 2006.October 2010. Originally approved in 1967. Last previous edition approved in 20042006 as
B462 – 046. DOI: 10.1520/B0462-106.
2
For ASME Boiler and Pressure Vessel Code applications see related Specification SB-462 in Section II of that Code.
* New designation established in accordance with Practice E527 and SAE J1086, Practice for Numbering Metals and Alloys (UNS).
3
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright ©ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B462 – 10
E8 Test Methods for Tension Testing of Metallic Materials
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E1473 Test Methods for Chemical Anal
...