ASTM F1105-09(2014)
(Practice)Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
SIGNIFICANCE AND USE
4.1 This practice determines the procedure to be used to ensure the long-term storage stability of aircraft cleaning and maintenance products in order to ensure their ability to meet the shelf-life requirements called up in specifications or contract documents. The subsequent testing requirements are detailed in the specification or contract.
SCOPE
1.1 This practice covers the determination of the stability in storage of liquid enzyme-based, terpene-based, and solvent-based chemical cleaning compounds used to clean the exterior surfaces of aircraft.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F1105 − 09 (Reapproved 2014)
Standard Practice for
Preparing Aircraft Cleaning Compounds, Liquid-Type,
Temperature-Sensitive, or Solvent-Based, for Storage
Stability Testing
This standard is issued under the fixed designation F1105; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope maintenance products in order to ensure their ability to meet
the shelf-life requirements called up in specifications or con-
1.1 This practice covers the determination of the stability in
tract documents. The subsequent testing requirements are
storage of liquid enzyme-based, terpene-based, and solvent-
detailed in the specification or contract.
based chemical cleaning compounds used to clean the exterior
surfaces of aircraft.
5. Sampling
1.2 The values stated in SI units are to be regarded as the
5.1 The sample for storage stability testing shall be taken
standard. The values given in parentheses are for information
from a controlled production formula, packaged lot, or batch
only.
delivered in a sealed, filled container to the purchaser for use.
This sample is normally a 1-gal can conforming to Federal
1.3 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the Specification PPP-P-704. This material shall have previously
been tested and passed all other specification requirements for
responsibility of the user of this standard to establish appro-
priate safety and health practices and determine the applica- qualification or acceptance. The sample container selected for
the test shall be kept sealed and unopened for the duration of
bility of regulatory limitations prior to use.
the test. The sample container shall be durably and legibly
2. Referenced Documents
marked with the following minimum information:
2.1 U.S. Government Document:
Federal Specification PPP-P-704 Pails, Metal Shipping,
Steel 1 through 12 Gallons
Storage Stability Test Sample
3. Summary of Practice
Supplier
Formula number
3.1 Storage stability is determined by evaluation of the
Date of packaging
effect of time, temperature, and environmental conditions on
Cold test period
Hot test period
the cleaning compound. Samples used for testing are filled
Batch/Lot No.
containerstakenfromthemanufacturer’scontrolledproduction
Test began
formulation, packaged, and delivered to the purchaser for Test ends
normal use.
6. Procedure
3.2 The sample container shall be subjected to the specified
6.1 Storage Environment—Place the sample container in a
storage environment for a period of 12 months. The test shall
storage area where a temperature of 10 to 27°C (50 to 80°F) is
be completed prior to 24 months from date of packaging.
maintained at least 80 % of the total storage test time. Do not
subjectthestoragetestsampletotemperatureover32°C(90°F)
4. Significance and Use
or under −12°C (10°F) during the entire test. Maintain the
4.1 This practice determines the procedure to be used to
sample container in a static condition not subject to vibration,
ensure the long-term storage stability of aircraft cleaning and
rolling, inversion, or other movement. Movement to the
necessary
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F1105 − 09 F1105 − 09 (Reapproved 2014)
Standard Practice for
Preparing Aircraft Cleaning Compounds, Liquid-Type,
Temperature-Sensitive, or Solvent-Based, for Storage
Stability Testing
This standard is issued under the fixed designation F1105; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice covers the determination of the stability in storage of liquid enzyme-based, terpene-based, and solvent-based
chemical cleaning compounds used to clean the exterior surfaces of aircraft.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2.1 U.S. Government Document:
Federal Specification PPP-P-704 Pails, Metal Shipping, Steel 1 through 12 Gallons
3. Summary of Practice
3.1 Storage stability is determined by evaluation of the effect of time, temperature, and environmental conditions on the cleaning
compound. Samples used for testing are filled containers taken from the manufacturer’s controlled production formulation,
packaged, and delivered to the purchaser for normal use.
3.2 The sample container shall be subjected to the specified storage environment for a period of 12 months. The test shall be
completed prior to 24 months from date of packaging.
4. Significance and Use
4.1 This practice determines the procedure to be used to ensure the long-term storage stability of aircraft cleaning and
maintenance products in order to ensure their ability to meet the shelf-life requirements called up in specifications or contract
documents. The subsequent testing requirements are detailed in the specification or contract.
5. Sampling
5.1 The sample for storage stability testing shall be taken from a controlled production formula, packaged lot, or batch delivered
in a sealed, filled container to the purchaser for use. This sample is normally a 1-gal can conforming to Federal Specification
PPP-P-704. This material shall have previously been tested and passed all other specification requirements for qualification or
acceptance. The sample container selected for the test shall be kept sealed and unopened for the duration of the test. The sample
container shall be durably and legibly marked with the following minimum information:
Storage Stability Test Sample
Supplier
This practice is under the jurisdiction of ASTM Committee F07 on Aerospace and Aircraft and is the direct responsibility of Subcommittee F07.07 on Qualification
Testing of Aircraft Cleaning Materials.
Current edition approved May 15, 2009Dec. 1, 2014. Published June 2009December 2014. Originally approved in 1987. Last previous edition approved in 20032009 as
F1105 – 03.F1105 – 09. DOI: 10.1520/F1105-09.10.1520/F1105-09R14.
Available from Stan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.