ASTM E1669-95a(2005)

Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

SIGNIFICANCE AND USE
Each Facility Rating Scale (see Figs. 1-6) in this classification provides a means to estimate the level of serviceability of a building or facility for one topic of serviceability and to compare that level against the level of any other building or facility.
This classification can be used for comparing how well different buildings or facilities meet a particular requirement for serviceability. It is applicable despite differences such as location, structure, mechanical systems, age, and building shape.
This classification can be used to estimate the amount of variance of serviceability from target or from requirement, for a single office facility, or within a group of office facilities.
This classification can be used to estimate the following:
4.4.1 Serviceability of an existing facility for uses other than its present use.
4.4.2 Serviceability (potential) of a facility that has been planned but not yet built.
4.4.3 Serviceability (potential) of a facility for which remodeling has been planned.
Use of this classification does not result in building evaluation or diagnosis. Building evaluation or diagnosis generally requires a special expertise in building engineering or technology and the use of instruments, tools, or measurements.
This classification applies only to facilities that are building constructions, or parts thereof. (While this classification may be useful in rating the serviceability of facilities that are not building constructions, such facilities are outside the scope of this classification.)
This classification is not intended for, and is not suitable for, use for regulatory purposes, nor for fire hazard assessment nor for fire risk assessment.
SCOPE
1.1 This classification contains pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for locating the building and finding the way inside the building.
1.2 Within that aspect of serviceability, each pair of scales, shown in , are for classifying one topic of serviceability. Each paragraph in an Occupant Requirement Scale (see ) summarizes one level of serviceability on that topic, which occupants might require. The matching entry in the Facility Rating Scale (see ) is a translation of the requirement into a description of certain features of a facility which, taken in combination, indicate that the facility is likely to meet that level of required serviceability.
1.3 The entries in the Facility Rating Scale (see ) are indicative and not comprehensive. They are for quick scanning to estimate approximately, quickly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, or evaluating how an office facility is performing.
1.4 This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared.
1.5 This classification indicates what would cause a facility to be rated at a certain level of serviceability but does not state how to conduct a serviceability rating nor how to assign a serviceability score. That information is found in Practice E 1334. The scales in this classification are complimentary to and compatible with Practice E 1334. Each requires the other.

General Information

• Status: Historical
• Publication Date: 30-Apr-2005
• ICS: 35.260 - Office machines
• Technical Committee: E06 - Performance of Buildings
• Drafting Committee: E06.25 - Whole Buildings and Facilities

Relations

• Replaces: ASTM E1669-95a(1999) - Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
• Effective Date: 01-May-2005
• Replaced By: ASTM E1669-95a(2012) - Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
• Effective Date: 01-Apr-2012
• Referred By: ASTM E1765-16(2023) - Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
• Effective Date: 01-May-2005
• Referred By: ASTM E1700-16 - Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope<rangeref></rangeref >
• Effective Date: 01-May-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: E1669 – 95a (Reapproved 2005)
Standard Classification for
Serviceability of an Office Facility for Location, Access and
,
1 2
Wayfinding
This standard is issued under the fixed designation E1669; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 2. Referenced Documents
2.1 ASTM Standards:
1.1 This classification contains pairs of scales for classify-
ing an aspect of the serviceability of an office facility, that is, E631 Terminology of Building Constructions
the capability of an office facility to meet certain possible E2334 Practice for Setting an Upper Confidence Bound For
requirements for locating the building and finding the way a Fraction or Number of Non-Conforming items, or a Rate
inside the building. of Occurrence for Non-conformities, UsingAttribute Data,
1.2 Within that aspect of serviceability, each pair of scales, When There is a Zero Response in the Sample
shown in Figs. 1-6, are for classifying one topic of serviceabil- E1679 Practice for Setting the Requirements for the Ser-
ity. Each paragraph in an Occupant Requirement Scale (see viceability of a Building or Building-Related Facility
Figs. 1-6) summarizes one level of serviceability on that topic, 2.2 ISO Document:
which occupants might require. The matching entry in the ISO 6240 International Standard, Performance Standards in
Facility Rating Scale (see Figs. 1-6) is a translation of the Building—Contents and Presentation
requirement into a description of certain features of a facility
3. Terminology
which, taken in combination, indicate that the facility is likely
3.1 Definitions
to meet that level of required serviceability.
1.3 The entries in the Facility Rating Scale (see Figs. 1-6) 3.1.1 facility—a physical setting used to serve a specific
purpose. E631
are indicative and not comprehensive. They are for quick
scanningtoestimateapproximately,quickly,andeconomically, 3.1.1.1 Discussion—A facility may be within a building, a
whole building, or a building with its site and surrounding
how well an office facility is likely to meet the needs of one or
another type of occupant group over time. The entries are not environment; or it may be a construction that is not a building.
The term encompasses both the physical object and its use.
for measuring, knowing, or evaluating how an office facility is
3.1.2 facility serviceability—the capability of a facility to
performing.
1.4 This classification can be used to estimate the level of perform the function(s) for which it is designed, used, or
required to be used. E631
serviceability of an existing facility. It can also be used to
estimate the serviceability of a facility that has been planned 3.1.2.1 Discussion—The scope of this performance is of the
facility as a system, including its subsystems, components and
but not yet built, such as one for which single-line drawings
and outline specifications have been prepared. materials and their interactions, such as acoustical, hydrother-
mal, air purity, and economic; and of the relative importance of
1.5 This classification indicates what would cause a facility
to be rated at a certain level of serviceability but does not state each performance requirement.
3.1.3 offıce—a place, such as a room, suite, or building, in
how to conduct a serviceability rating nor how to assign a
serviceability score. That information is found in Practice which business, clerical or professional activities are con-
ducted. E631
E2334. The scales in this classification are complimentary to
and compatible with Practice E2334. Each requires the other. 3.1.4 For standard definitions of additional terms applicable
to this classification, see Terminology E631.
3.2 Definitions of Terms Specific to This Standard:
3.2.1 transit—bus or other scheduled public transportation.
This classification is under the jurisdiction of ASTM Committee E06 on
Performance of Buildings and is the direct responsibility of Subcommittee E06.25
on Whole Buildings and Facilities.
Current edition approved May 1, 2005. Published May 2005. Originally
approved in 1995. Last previous edition approved in 1999 as E1669 – 95a (1999). For referenced ASTM standards, visit the ASTM website, www.astm.org, or
DOI: 10.1520/E1669-95AR05. contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Portions of this document are based on material originally prepared by the Standards volume information, refer to the standard’s Document Summary page on
International Centre for Facilities (ICF) and r 1993 by ICF and Minister of Public the ASTM website.
Works and Government Services Canada. Their cooperation in the development of Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
this standard is acknowledged. 4th Floor, New York, NY 10036.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
...