ASTM F1910-98(2018)

Standard Specification for Long Barbed Tape Obstacles

ABSTRACT
This specification covers barbed tape materials and configurations used for security barriers. Barbed tape shall be manufactured from stainless and galvanized steel. Stainless steel strip shall be either ferretic or austenitic. Coil loops shall not be kinked, unless it is part of the design.
SCOPE
1.1 This specification covers barbed tape materials and configurations used for security barriers.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Historical
• Publication Date: 28-Feb-2018
• ICS: 91.090 - External structures
• Technical Committee: F14 - Fences
• Drafting Committee: F14.40 - Chain Link Fence and Wire Accessories

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F1910 −98 (Reapproved 2018)
Standard Specification for
Long Barbed Tape Obstacles
This standard is issued under the fixed designation F1910; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 5. Ordering/Specifying Information
5.1 Ordering or specifying barbed tape shall include the
1.1 This specification covers barbed tape materials and
following information as per sample specification, or by
configurations used for security barriers.
referencingitemnumbersinTables1and2(indicatenumberof
1.2 This international standard was developed in accor-
loops,ifapplicable).Materialfurnishedunderthisspecification
dance with internationally recognized principles on standard-
shall conform to applicable requirements of current editions of
ization established in the Decision on Principles for the
ASTM Standards.
Development of International Standards, Guides and Recom-
NOTE 1—The following sample specification is provided to assist when
mendations issued by the World Trade Organization Technical
specifyingororderingbarbedtapematerial.Actualsizeandstylewillvary
Barriers to Trade (TBT) Committee.
by individual job requirements.
Sample Specification Only—Barbed tape obstacle shall be 30 in.
2. Referenced Documents
diameter (62 in.). Each loop shall consist of 24 (61) clusters of four
2 needle-sharp barbs on 4 in. centers, each barb measuring a minimum of
2.1 ASTM Standards:
1.2 in. in length. The barbed tape shall be fabricated from Series 430
A176 Specification for Stainless and Heat-Resisting Chro-
stainless steel with optional hardness. The barbed tape shall be perma-
mium Steel Plate, Sheet, and Strip (Withdrawn 2015)
nently cold–clenched over an austenitic mechanical spring core wire. The
wire shall have a diameter of 0.098 in. with a minimum tensile strength of
A240/A240M Specification for Chromium and Chromium-
approximately 140 psi. The barbed tape shall have a minimum 230° wrap
Nickel Stainless Steel Plate, Sheet, and Strip for Pressure
about the core wire. Adjacent alternate loops shall be clipped together in
Vessels and for General Applications
five (5) locations around the circumference to obtain the concertina effect.
A370 Test Methods and Definitions for Mechanical Testing
Clipspacingoftheextendedcoilshallbe12 62in.Clipsshallbecapable
of Steel Products of withstanding a minimum pull load of 200 lb. Each coil shall contain 51
loops and cover 25 6 1 ft.
A666 Specification forAnnealed or Cold-WorkedAustenitic
Stainless Steel Sheet, Strip, Plate, and Flat Bar
5.1.1 Quantity—The number of units of barbed tape re-
A764 Specification for Metallic Coated Carbon Steel Wire,
quired. For fixed length units, the length per unit should be
Coated at Size and Drawn to Size for Mechanical Springs
specified.
F1379 Terminology Relating to Barbed Tape
5.1.2 Description— Barbed tape shall be described as single
coil helical, single coil concertina, double coil concertina, or
3. Terminology double coil helical.
5.1.3 Diameter—The purchaser shall specify the packaged
3.1 Refer to Terminology F1379.
diameter. When double coil products are specified, the inner
and outer coil packaged diameters shall be given.
4. Classification
5.1.4 Barb Length—RefertoTerminologyF1379andTables
4.1 Refer to 5.1.8.
1 and 2.
5.1.5 Coil Loops—The number of coil loops shall be speci-
fied by the purchaser.
5.1.6 Unit Length—The purchaser shall specify the installed
This specification is under the jurisdiction ofASTM Committee F14 on Fences
and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and length and coil spacing, including the coil spacing tolerance.
Wire Accessories.
5.1.7 Number of attachment points, in accordance with
Current edition approved March 1, 2018. Published March 2018. Originally
Terminology F1379 and Tables 1 and 2.
approved in 1998. Last previous edition approved in 2013 as F1910 - 98(2013).
5.1.8 Cross Sections—The purchaser shall specify the cross
DOI: 10.1520/F1910-98R18.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
sections in accordance with Terminology F1379.
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on 6. Material
the ASTM website.
6.1 Composition—Barbed tape shall be manufactured from
The last approved version of this historical standard is referenced on
www.astm.org. stainless and galvanized steel in accordance with the ASTM
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
F1910 − 98 (2018)
TABLE 1 Stainless Steel Long Barbed Tape (Reinforced) (See Terminology F1379, Figs. 2 and 3)
NOTE 1—Maximum barb point radius = 0.005 in.
NOTE 2—Minimum barb length = 1.2 in.
NOTE 3—Maximum barb spacing=4in.
Item Num- Description Barbed Tape Ma- Core-Wire Material Barb Clusters Coil Loops Coil Loop Spac- Coil Length, ft Attachment
ber terial Per Loop ing ±2.0 in. Points
Helical
1 18 in. Single Coil 430 SS 0.025 in. 0.098 SS 300 Series 13 33 12 in. 33 0
Helical Thick 140 KSI (965 MPa) 18 in. 50 0
2 18 in. Single Coil 430 SS 0.025 in. 0.098 Galvanized 13 33 12 in. 33 0
Helical Thick Steel Class III 18 in. 50 0
3 18 in. Single Coil 430 SS 0.025 in. 013 33 12in. 33 0
Helical Thick 18 in. 50 0
4 18 in. Type III Single 300 Series SS 013 33 12in. 33 0
Coil Helical 0.025 in. Thick 18 in. 50 0
5 24 in. Single Coil 430 SS 0.025 in. 0.098 SS 300 Series 19 ± 1 33 12 in. 33 0
Helical Thick 140 KSI (965 MPa) 18 in. 50 0
6 24 in. Single Coil 430 SS 0.025 in. 0.098 Galvanized 19 ± 1 33 12 in. 33 0
Helical Thick S
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F1910 − 98 (Reapproved 2013) F1910 − 98 (Reapproved 2018)
Standard Specification for
Long Barbed Tape Obstacles
This standard is issued under the fixed designation F1910; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This specification covers barbed tape materials and configurations used for security barriers.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2.1 ASTM Standards:
A176 Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip (Withdrawn 2015)
A240/A240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and
for General Applications
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A666 Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A764 Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
F1379 Terminology Relating to Barbed Tape
3. Terminology
3.1 Refer to Terminology F1379.
4. Classification
4.1 Refer to 5.1.8.
5. Ordering/Specifying Information
5.1 Ordering or specifying barbed tape shall include the following information as per sample specification, or by referencing
item numbers in Tables 1 and 2 (indicate number of loops, if applicable). Material furnished under this specification shall conform
to applicable requirements of current editions of ASTM Standards.
NOTE 1—The following sample specification is provided to assist when specifying or ordering barbed tape material. Actual size and style will vary
by individual job requirements.
Sample Specification Only—Barbed tape obstacle shall be 30 in. diameter (62 in.). Each loop shall consist of 24 (61) clusters of four needle-sharp
barbs on 4 in. centers, each barb measuring a minimum of 1.2 in. in length. The barbed tape shall be fabricated from Series 430 stainless steel with optional
hardness. The barbed tape shall be permanently cold–clenched over an austenitic mechanical spring core wire. The wire shall have a diameter of 0.098
in. with a minimum tensile strength of approximately 140 psi. The barbed tape shall have a minimum 230° wrap about the core wire. Adjacent alternate
loops shall be clipped together in five (5) locations around the circumference to obtain the concertina effect. Clip spacing of the extended coil shall be
12 6 2 in. Clips shall be capable of withstanding a minimum pull load of 200 lb. Each coil shall contain 51 loops and cover 25 6 1 ft.
5.1.1 Quantity—The number of units of barbed tape required. For fixed length units, the length per unit should be specified.
5.1.2 Description— Barbed tape shall be described as single coil helical, single coil concertina, double coil concertina, or double
coil helical.
This specification is under the jurisdiction of ASTM Committee F14 on Fences and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and Wire
Accessories.
Current edition approved March 1, 2013March 1, 2018. Published March 2013March 2018. Originally approved in 1998. Last previous edition approved in 20082013 as
F1910 - 98(2008).(2013). DOI: 10.1520/F1910-98R13.10.1520/F1910-98R18.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
The last approved version of this historical standard is referenced on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
F1910 − 98 (2018)
TABLE 1 Stainless Steel Long Barbed Tape (Reinforced) (See Terminology F1379, Figs. 2 and 3)
NOTE 1—Maximum barb point radius = 0.005 in.
NOTE 2—Minimum barb length = 1.2 in.
NOTE 3—Maximum barb spacing = 4 in.
Item Num- Description Barbed Tape Ma- Core-Wire Material Barb Clusters Coil Loops Coil Loop Spac- Coil Length, ft Attachment
ber terial Per Loop ing ±2.0 in. Points
Helical
1 18 in. Single Coil 430 SS 0.025 in. 0.098 SS 300 Series 13 33 12 in. 33 0
Helical Thick 140 KSI (965 MPa) 18 in. 50 0
2 18 in. Single Coil 430 SS 0.025 in. 0.098 Galvanized 13 33 12 in. 33 0
Helical Thick Steel Class III 18 in. 50 0
3 18 in. Single Coil 430 SS 0.025 in. 0 13 33 12 in. 33 0
Helical Thick 18 in. 50 0
4 18 in. Type III Single 300 Series SS 0 13 33 12 in. 33 0
Coil Helical 0.025 in. Thick 18 in. 50 0
5 24 in. Single Coil 430 SS 0.025 in. 0.098 SS 300 Series 19 ± 1 33 12 in. 33 0
Helical Thick 140 KSI (965 MPa) 18 in. 50 0
6 24 in. Single Coil 430 SS 0.025 in. 0.098 Galvanized 19 ± 1 33 12 in. 33 0
Helical Thick Steel Class III 18 in. 50 0
7 24 in. Single Coil 430 SS 0.025 in. 0 19 ± 1 33 12 in. 33 0
Helical Thick 18 in. 50 0
Concertina
8 18 in. Single Coil Con- 430 SS 0.025 in. 0.098 Galvanized 13 31 16 in. 20 03
certina Thick Steel Class III 51 12 in. 25 03
9 18 in. Single Coil Con- 430 SS 0.025 in. 0.098 SS 300 Series 13 31 16 in. 20 03
certina Thick 140 KSI (965 MPa) 51 12 in. 25 03
10 24 in. Single Coil Con- 430 SS 0.025 in. 0.098 Galvanized 19 ± 1 31 16 in. 20 03
certina Thick Steel Class III 51 12 in. 25 03
11 24 in. Single Coil Con- 430 SS 0.025 in. 0.098 SS 300 Series 19 ± 1 31 16 in. 20 03
certina Thick 140 KSI (965 MPa) 51 12 in. 25 03
12 30 in. Single Coil Con- 430 SS 0.025 in. 0.098 Galvanized 24 ± 1 31
...