ASTM D4035-02
(Specification)Standard Performance Specification for Knitted Necktie and Scarf Fabrics
Standard Performance Specification for Knitted Necktie and Scarf Fabrics
SCOPE
1.1 This performance specification covers knitted necktie and scarf fabrics composed of any textile fiber or mixture of textile fibers.
1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.
1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 4035 – 02
Standard Performance Specification for
1
Knitted Necktie and Scarf Fabrics
This standard is issued under the fixed designation D 4035; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 15-1979 Colorfastness to Perspiration
16-1977 Colorfastness to Light
1.1 This performance specification covers knitted necktie
23-1975 Colorfastness to Burnt Gas Fumes
and scarf fabrics composed of any textile fiber or mixture of
61-1975 Colorfastness to Washing, Domestic, and Launder-
textile fibers.
ing, Commercial: Accelerated
1.2 These requirements apply to the length and width
96-1975 DimensionalChangesinLaunderingofWovenand
directions for those properties where fabric direction is perti-
Knitted Textiles Except Wool
nent.
116-1977 ColorfastnesstoCrocking:RotaryVerticalCrock-
1.3 The following precautionary statement pertains only to
meter Method
the test methods portion, Section 7, of this specification. This
124-1978 Appearance of Durable Press Fabrics After Re-
standard does not purport to address all of the safety concerns,
peated Home Launderings
if any, associated with its use. It is the responsibility of the user
132-1977 Colorfastness to Drycleaning
of this standard to establish appropriate safety and health
135-1978 Dimensional Changes in Automatic Home Laun-
practices and determine the applicability of regulatory limita-
derings of Durable Press Woven of Knit Fabrics
tions prior to use.
172 Colorfastness to Non-Chlorine Bleach in Home Laun-
2. Referenced Documents dering
2
188 Colorfastness to Sodium Hypochlorite Bleach in Home
2.1 ASTM Standards:
Laundering
D 123 Terminology Relating to Textiles
Evaluation Procedure 1 Gray Scale for Color Change
D 2594 Test Methods for Stretch Properties of Knitted
Evaluation Procedure 2 Gray Scale for Staining
Fabrics Having Low Power
Evaluation Procedure 3 AATCC Chromatic Transference
D 2724 Test Methods for Bonded, Fused, and Laminated
Scale
Apparel Fabrics
4
2.3 Federal Standard:
D 2905 Practice for Statements on Number of Specimens
16 CFR 1610—Standard for Flammability of Clothing Tex-
for Textiles
tiles
D 3786 Test Method for Hydraulic Bursting Strength of
Knitted Goods and Nonwoven Fabrics—Diaphragm
NOTE 1—Reference to test methods in this specification give only the
Bursting Strength Tester Method
permanent part of the designation of ASTM, AATCC, or other test
D 3787 Test Method for Bursting Strength of Knitted methods. The current editions of each test method cited shall prevail.
Goods—Constant-Rate-of-Traverse (CRT) Ball Burst Test
3. Terminology
3
2.2 AATCC Methods:
3.1 Definitions:
8-1977 Colorfastness to Crocking: AATCC Crockmeter
3.1.1 necktie—a decorative band of fabric worn around the
Method
neck and tied in a knot or a bow.
3.1.2 scarf—in apparel, an oblong or square piece of cloth
1
This specification is under the jurisdiction of ASTM Committee D13 on
worn for warmth or as a decorative item.
Textiles and is the direct responsibility of Subcommittee D13.61 on Apparel.
Current edition approved May 10, 2002. Published June 2002. Originally 3.2 For definitions of textile terms used in this specification,
published as D 4035 – 81. Last previous edition D 4035 – 95.
refer to the individualASTM andAATCC test methods and to
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Terminology D 123.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
3 4
Available from American Association of Textile Chemists and Colorists, P.O. Available from Superintendent of Documents, Government Printing Office,
Box 12215, Research Triangle Park, NC 27709. Washington, DC 20402.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
D4035–02
4. Specification Requirements 6. Sampling
4.1 The properties of fabrics for neckties and scarfs shall
6.1 Testsshallbeperformedonthefabricasitwillreachthe
conform to the specification requirements in Table 1.
consumer. Any “partially finished” or “post-finished” fabrics
should first be processed in accordance with the fabric manu-
5. Significance and Use
facturer’s instructions.
6.2 Unless otherwise agreed upon, as when specified in an
5.1 Upon mutual agreement between the purchaser and the
applicablematerialspecification,takethenumberofspecimens
seller, fabrics intended for this end use should meet all of the
directed in each of the applicable test methods.
requireme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.