iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D4723-07e1

(Guide)

Standard Classification Index of and Descriptions of Textile Flammability Test Methods

Standard Classification Index of and Descriptions of Textile Flammability Test Methods

SCOPE
1.1 This index provides lists of test methods used in the United States of America and Canada for measuring and describing the properties of textiles and textile products or assemblies in response to heat and flame under controlled laboratory conditions. Military specifications are not included in the listing. Related but separately published sampling plans are not included.
1.2 Indices:
1.2.1 An index of test methods per end use application is found in 6.1.
1.2.2 An index of test methods by publishing agency or the authority having jurisdiction is found in 6.2. The World Wide Web address of the publisher is listed so that the reader can gather specific information on the standard or regulation.
1.2.3 Although some research test methods are not included, the listing is reasonably complete for textile items of commerce.
1.3 All published ASTM textile methods are included as well as methods useful for, but not necessarily intended exclusively for, textiles.
1.4 Some documents are included solely because they may be useful for reference or research purposes.
1.5 ASTM assumes no responsibility for the suitability of the listed test methods and performance specifications to describe or appraise the fire hazard of materials, products, or assemblies under actual fire conditions. Inclusion in this listing does not constitute endorsement by ASTM.
1.6 This standard can not be used to provide quantitative measure.

General Information

Status
Historical
Publication Date
31-Dec-2006
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
59.080.30 - Textile fabrics
Technical Committee
D13 - Textiles
Drafting Committee
D13.52 - Flammability
Current Stage
Ref Project

Relations

Replaces
ASTM D4723-07 - Standard Classification Index of and Descriptions of Textile Flammability Test Methods
Effective Date
01-Jan-2007
Replaced By
ASTM D4723-07e2 - Standard Classification Index of and Descriptions of Textile Flammability Test Methods (Withdrawn 2016)
Effective Date
01-Jan-2007
Referred By
ASTM F1358/F1358M-20 - Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
Effective Date
01-Jan-2007

Buy Standard

ASTM D4723-07e1 - Standard Classification Index of and Descriptions of Textile Flammability Test MethodsASTM D4723-07e1 - Standard Classification Index of and Descriptions of Textile Flammability Test Methods
PreviousNext
Guide
ASTM D4723-07e1 - Standard Classification Index of and Descriptions of Textile Flammability Test Methods
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
´1
Designation: D4723 – 07
Standard Classification Index of and Descriptions of
1
Textile Flammability Test Methods
This standard is issued under the fixed designation D4723; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
´ NOTE—Editorial changes were made in 6.2.2.1 in March 2007.
1. Scope D883 Terminology Relating to Plastics
D4391 Terminology Relating to The Burning Behavior of
1.1 This index provides lists of test methods used in the
Textiles
United States of America and Canada for measuring and
E176 Terminology of Fire Standards
describing the properties of textiles and textile products or
F1494 Terminology Relating to Protective Clothing
assemblies in response to heat and flame under controlled
laboratory conditions. Military specifications are not included
3. Terminology
in the listing. Related but separately published sampling plans
3.1 Definitions—For definitions of terms relating to burning
are not included.
behavior, refer to Terminology D4391. For definitions of other
1.2 Indices:
textile terms, refer to Terminology D123. For definitions of
1.2.1 An index of test methods per end use application is
terms related to plastics refer to Terminology D883. For
found in 6.1.
definitions related to fire science refer to Terminology E176.
1.2.2 An index of test methods by publishing agency or the
For definitions of terms relating to protective clothing refer to
authority having jurisdiction is found in 6.2. The World Wide
Terminology F1494.
Web address of the publisher is listed so that the reader can
gather specific information on the standard or regulation.
4. Significance and Use
1.2.3 Althoughsomeresearchtestmethodsarenotincluded,
4.1 The information indexed provides the user with the
the listing is reasonably complete for textile items of com-
identification of test methods, performance specifications, and
merce.
relateddocumentspertainingtotheflammabilityorresponseto
1.3 All published ASTM textile methods are included as
heat of textiles and materials.
well as methods useful for, but not necessarily intended
exclusively for, textiles.
5. Basis of Classification
1.4 Some documents are included solely because they may
5.1 The classification indices provides information about
be useful for reference or research purposes.
theenduseofthetestmethod,itsidentificationnumberwithno
1.5 ASTM assumes no responsibility for the suitability of
edition date, the publishing agency, and its World Wide Web
the listed test methods and performance specifications to
(www) address so that detailed information can be obtained
describe or appraise the fire hazard of materials, products, or
from the publisher.
assemblies under actual fire conditions. Inclusion in this listing
does not constitute endorsement by ASTM.
6. Test Methods by End Use Application and by
1.6 This standard can not be used to provide quantitative
Publishing Agency
measure.
6.1 Index of Test Methods by End Use Application:
6.1.1 Clothing and Textiles:
2. Referenced Documents
2 6.1.1.1 Consumer Wearing Apparel:
2.1 ASTM Standards:
ASTM F1230
D123 Terminology Relating to Textiles
16 CFR 1610
16 CFR 1611
NFPA 705
1
This classification is under the jurisdiction of ASTM Committee D13 on
CAN/CGSB 4.2 No. 27.3 /ISO 6941
Textiles and is the direct responsibility of Subcommittee D13.52 on Flammability.
CAN/CGSB 4.2 No. 27.4 /ISO 6940
Current edition approved Jan. 1, 2007. Published January 2007. Originally
CAN/CGSB 4.162
approved in 1987. Last previous edition approved in 1999 as D4723 – 99. DOI:
10.1520/D4723-07E01.
6.1.1.2 Children’s Sleepwear:
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
ASTM F6545
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
16 CFR 1615
Standards volume information, refer to the standard’s Document Summary page on
16 CFR 1616
the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
´1
D4723 – 07
6.1.1.3 Protective Clothing:
ASTM F2859
ASTM F648
ASTM F1506
16 CFR 1630
ASTM F4108
16 CFR 1631
ASTM F1891
NFPA 253
NFPA 1971
CAN/CGSB 4.2 No. 27.6
NFPA 1975
CAN/CGSB 4.155
NFPA 1976
CAN/CGSB 4.162
NFPA 1977
CAN 4–S1022
NFPA 1991
CAN 4–S 117.1
NFPA 1992
CAN 4–S117
NFPA 1994
ULC S–102.2
NFPA 1999
NFPA 2122
6.1.2.6 Upholstered Furniture:
CAN/CGSB 4.2 No. 781.1
CAN/CGSB 155.1
ASTM F5238
CAN/CGSB 155.2 ASTM F1352
ASTM F1353
6.1.1.4 Textile Flammability and Heat Transfer Methods: ASTM F1537
ASTM F1822
ASTM F1518
ASTM F1354
ASTM F3411
ASTM F1474
ASTM F3659
ASTM F1550
ASTM F
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D6413/D6413M-22(Test Method)
Standard Test Method for Flame Resistance of Textiles (Vertical Test)

SIGNIFICANCE AND USE
5.1 This test method determines the response of textiles to a standard ignition source, deriving measurement values for afterflame time, afterglow time, and char length.  
5.2 The vertical flame resistance, as determined by this test method, only relates to a specified flame exposure and application time.  
5.3 This test method maintains the specimen in a static, draft-free, vertical position and does not involve movement except that resulting from the exposure.  
5.4 Test Method D6413 has been adopted from Federal Test Standard No. 191A method 5903.1, which has been used for many years in acceptance testing. The between-laboratory precision of this test method has not been established. Refer to Section 14 for single-laboratory precision.  
5.4.1 If there are differences or practical significance between reported test results for two laboratories (or more), comparative tests should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, the test samples used should be as homogeneous as possible, that are drawn from the material from which the disparate test results are obtained, and that are assigned randomly in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration on the known bias.
SCOPE
1.1 This test method is used to measure the vertical flame resistance of textiles.  
1.1.1 As a part of the measure of flame resistance, afterflame and afterglow characteristics are evaluated.  
1.2 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.  
1.3 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.  
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off
ASTM
ASTM D1230-22a(Test Method)
Standard Test Method for Flammability of Apparel Textiles

SIGNIFICANCE AND USE
5.1 Test Method D1230 cannot be recommended for the acceptance testing of commercial shipments since Federal regulations require apparel fabrics to meet the criteria of 16 CFR Part 1610 and correlation of test results with actual performance has not been established. Although Test Method D1230 is not recommended for acceptance testing, it is useful because it provides a method to test general non-regulated textile fabrics.  
5.1.1 In case of a dispute arising from differences in reported test results when using Test Method D1230 for testing of commercial shipments, the purchaser and the supplier shall conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. At a minimum, the two parties shall take a group of test specimens which are as homogeneous as possible and which are from a lot of material of the type in question. The test specimens shall be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories shall be compared using a nonparametric test for unpaired data and an acceptable probability level chosen by the two parties before testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results in light of the known bias.  
5.2 All fabrics made of natural or regenerated cellulose, as well as many made from other natural or man-made fibers, are combustible. Some combustible fabrics when used for clothing are potentially dangerous to the wearer because of such factors as ease of ignition, burn time, amount of heat released, and design of the garment. This test measures two such factors: ease of ignition and burn time.  
5.3 In order to place fabrics in one of the three flammability classes, arbitrary limits have been selected for time of application of the flame and for the burn time. These limit...
SCOPE
1.1 This test method covers the evaluation of the flammability of textile fabrics as they reach the consumer for apparel. This test method sets forth a classification system for apparel textiles and identifies textiles which have burning characteristics that make them unsuitable for use in clothing, by using as the ignition source a 26-gauge hypodermic needle.  
1.1.1 This test method shall be used for the flammability of specific categories of tight fitting children’s sleepwear in accordance with 16 CFR 1615 and 16 CFR 1616 which are accessed by the test procedure in 16 CFR 1610 (or ASTM D1230 equivalent).  
1.1.2 This test method shall not be used for the evaluation of the flammability of textiles used in children's sleepwear, to which 16 CFR 1615 and 16 CFR 1616 apply. These items are addressed in Test Method D6545.  
1.1.3 This test method shall not be used for the evaluation of the flammability of decorative fabrics or of textiles not intended for use as apparel. Suitable test methods for such applications include Test Method D6413/D6413M or NFPA 701.  
1.1.4 This test method shall not be used for the evaluation of the flammability of protective clothing, such as those worn by individuals in the fire service or in other occupations where exposure to heat, flame, or electric arc is likely. Suitable test methods for such applications have been developed by ASTM Committee F23, on Personal Protective Clothing and Equipment.  
1.2 This test method is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.  
1.3 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
Note 1: This test method is not identica...

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    English language
    sale 15% off
ASTM
ASTM D4391-18a(Terminology)
Standard Terminology Relating to The Burning Behavior of Textiles
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D6413/D6413M-22(Test Method)
Standard Test Method for Flame Resistance of Textiles (Vertical Test)

SIGNIFICANCE AND USE
5.1 This test method determines the response of textiles to a standard ignition source, deriving measurement values for afterflame time, afterglow time, and char length.  
5.2 The vertical flame resistance, as determined by this test method, only relates to a specified flame exposure and application time.  
5.3 This test method maintains the specimen in a static, draft-free, vertical position and does not involve movement except that resulting from the exposure.  
5.4 Test Method D6413 has been adopted from Federal Test Standard No. 191A method 5903.1, which has been used for many years in acceptance testing. The between-laboratory precision of this test method has not been established. Refer to Section 14 for single-laboratory precision.  
5.4.1 If there are differences or practical significance between reported test results for two laboratories (or more), comparative tests should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, the test samples used should be as homogeneous as possible, that are drawn from the material from which the disparate test results are obtained, and that are assigned randomly in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration on the known bias.
SCOPE
1.1 This test method is used to measure the vertical flame resistance of textiles.  
1.1.1 As a part of the measure of flame resistance, afterflame and afterglow characteristics are evaluated.  
1.2 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.  
1.3 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.  
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off
ASTM
ASTM D1230-22a(Test Method)
Standard Test Method for Flammability of Apparel Textiles

SIGNIFICANCE AND USE
5.1 Test Method D1230 cannot be recommended for the acceptance testing of commercial shipments since Federal regulations require apparel fabrics to meet the criteria of 16 CFR Part 1610 and correlation of test results with actual performance has not been established. Although Test Method D1230 is not recommended for acceptance testing, it is useful because it provides a method to test general non-regulated textile fabrics.  
5.1.1 In case of a dispute arising from differences in reported test results when using Test Method D1230 for testing of commercial shipments, the purchaser and the supplier shall conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. At a minimum, the two parties shall take a group of test specimens which are as homogeneous as possible and which are from a lot of material of the type in question. The test specimens shall be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories shall be compared using a nonparametric test for unpaired data and an acceptable probability level chosen by the two parties before testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results in light of the known bias.  
5.2 All fabrics made of natural or regenerated cellulose, as well as many made from other natural or man-made fibers, are combustible. Some combustible fabrics when used for clothing are potentially dangerous to the wearer because of such factors as ease of ignition, burn time, amount of heat released, and design of the garment. This test measures two such factors: ease of ignition and burn time.  
5.3 In order to place fabrics in one of the three flammability classes, arbitrary limits have been selected for time of application of the flame and for the burn time. These limit...
SCOPE
1.1 This test method covers the evaluation of the flammability of textile fabrics as they reach the consumer for apparel. This test method sets forth a classification system for apparel textiles and identifies textiles which have burning characteristics that make them unsuitable for use in clothing, by using as the ignition source a 26-gauge hypodermic needle.  
1.1.1 This test method shall be used for the flammability of specific categories of tight fitting children’s sleepwear in accordance with 16 CFR 1615 and 16 CFR 1616 which are accessed by the test procedure in 16 CFR 1610 (or ASTM D1230 equivalent).  
1.1.2 This test method shall not be used for the evaluation of the flammability of textiles used in children's sleepwear, to which 16 CFR 1615 and 16 CFR 1616 apply. These items are addressed in Test Method D6545.  
1.1.3 This test method shall not be used for the evaluation of the flammability of decorative fabrics or of textiles not intended for use as apparel. Suitable test methods for such applications include Test Method D6413/D6413M or NFPA 701.  
1.1.4 This test method shall not be used for the evaluation of the flammability of protective clothing, such as those worn by individuals in the fire service or in other occupations where exposure to heat, flame, or electric arc is likely. Suitable test methods for such applications have been developed by ASTM Committee F23, on Personal Protective Clothing and Equipment.  
1.2 This test method is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.  
1.3 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
Note 1: This test method is not identica...

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    English language
    sale 15% off
ASTM
ASTM D4391-18a(Terminology)
Standard Terminology Relating to The Burning Behavior of Textiles
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1751-23(Specification)
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)

SCOPE
1.1 This specification covers preformed expansion joint filler having relatively little extrusion and substantial recovery after release from compression.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
Note 1: Attention is called to Specifications D1752 and D994/D994M.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off