iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM C208-95(2001)

(Specification)

Standard Specification for Cellulosic Fiber Insulating Board

Standard Specification for Cellulosic Fiber Insulating Board

SCOPE
1.1 This specification covers the principal cellulosic fiber insulating board types, grades, and sizes. Requirements are specified for composition, construction, physical properties, tolerances, sampling procedures, and test methods.
1.2 The values stated in inch-pound units are to be regarded as the standard. The metric values given in parentheses are provided for information only.
1.3 When the installation or use of thermal insulation materials, accessories, and systems may pose safety or health problems, the manufacturer shall provide the user appropriate current information regarding any known problems associated with the recommended use of the company's products and shall also recommend protective measures to be employed in their safe utilization. The user shall establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

General Information

Status
Historical
Publication Date
31-Dec-2000
ICS
91.100.60 - Thermal and sound insulating materials
Technical Committee
C16 - Thermal Insulation
Drafting Committee
C16.22 - Organic and Nonhomogeneous Inorganic Thermal Insulations
Current Stage
Ref Project

Relations

Replaces
ASTM C208-95 - Standard Specification for Cellulosic Fiber Insulating Board
Effective Date
01-Jan-2001
Replaced By
ASTM C208-08 - Standard Specification for Cellulosic Fiber Insulating Board
Effective Date
01-Aug-2008
Referred By
ASTM C1558-19 - Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
Effective Date
01-Jan-2001
Referred By
ASTM C846-16(2021) - Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
Effective Date
01-Jan-2001
Referred By
ASTM C209-20 - Standard Test Methods for Cellulosic Fiber Insulating Board
Effective Date
01-Jan-2001
Referred By
ASTM C1289-23 - Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Effective Date
01-Jan-2001

Buy Standard

ASTM C208-95(2001) - Standard Specification for Cellulosic Fiber Insulating BoardASTM C208-95(2001) - Standard Specification for Cellulosic Fiber Insulating Board
PreviousNext
Technical specification
ASTM C208-95(2001) - Standard Specification for Cellulosic Fiber Insulating Board
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C 208 – 95 (Reapproved 2001)
Standard Specification for
Cellulosic Fiber Insulating Board
This standard is issued under the fixed designation C208; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 4900.1 Rev-1 U.S. Dept. of Housing and Urban Develop-
ment Minimum Property Standards, One and Two Family
1.1 This specification covers the principal cellulosic fiber
Dwellings
insulating board types, grades, and sizes. Requirements are
specified for composition, construction, physical properties,
3. Terminology
tolerances, sampling procedures, and test methods.
3.1 For definitions of terms used in this specification, see
1.2 The values stated in inch-pound units are to be regarded
Terminology C168 and Definitions D1554.
as the standard. The metric values given in parentheses are
3.2 Definitions of Terms Specific to This Standard:
provided for information only.
3.2.1 cellulosic fiber insulating board—a fibrous-felted,
1.3 When the installation or use of thermal insulation
homogeneous panel made from ligno-cellulosic fibers (usually
materials, accessories, and systems may pose safety or health
wood or cane) and having a density of less than 31 lb/ft (497
problems, the manufacturer shall provide the user appropriate
3 3 3
kg/m ) but more than 10 lb/ft (160 kg/m ).
current information regarding any known problems associated
3.2.1.1 Discussion—Cellulosic fiber insulating board is
withtherecommendeduseofthecompany’sproductsandshall
characterized by an integral bond which is produced by
also recommend protective measures to be employed in their
interfelting of the fibers, but which has not been consolidated
safe utilization. The user shall establish appropriate safety and
under heat and pressure as a separate stage in manufacture.
health practices and determine the applicability of regulatory
Other materials may be added during manufacture to improve
requirements prior to use.
certain properties.
2. Referenced Documents
4. Classification
2.1 ASTM Standards:
4.1 Insulatingboardcoveredbythisspecificationconsistsof
C168 Terminology Relating to Thermal Insulation
2 six types:
C209 Test Methods for Cellulosic Fiber Insulating Board
4.1.1 Type I—Sound deadening board, for use in wall
C390 Criteria for Sampling and Acceptance of Preformed
2 assemblies to control sound transmissions.
Thermal Insulation Lots
4.1.2 Type II—Roof insulation board, for use in various
C846 Practice for Application of Cellulosic Fiber Insulat-
2 roofing systems.
ing Board for Wall Sheathing
4.1.2.1 Grade 1—Primarily for use under built up roof
D1037 Test Methods for Evaluating Properties of Wood-
3 systems.
Base Fiber and Particle Panel Materials
4.1.2.2 Grade 2—Primarilyforuseundersingle-plyroofing
D1554 Definitions of Terms Relating to Wood-Base Fiber
3 systems.
and Particle Panel Materials
4.1.3 Type III—Ceiling tiles and panels.
D 2164 Methods of Testing Structural Insulating Roof
3 4.1.3.1 Grade 1—Nonacoustical, for use as decorative wall
Deck
and ceiling coverings.
E72 Methods of Conducting Strength Tests of Panels for
4.1.3.2 Grade 2—Acoustical, for use as decorative, sound
Building Construction
absorbing wall and ceiling coverings.
2.2 Federal Standard:
4.1.4 Type IV—Wall Sheathing.
4.1.4.1 Grade 1—Regular, for use as wall sheathing in
frame construction.
This specification is under the jurisdiction of ASTM Committee C-16 on
Thermal Insulation and is the direct responsibility of Subcommittee C16.22 on 4.1.4.2 Grade 2—Structural, for use as wall sheathing in
Organic and Nonhomogeneous Inorganic Thermal Insulations.
frameconstruction.WheninstalledinaccordancewithPractice
Current edition approved Feb. 15, 1995. Published April 1995. Originally
published as C208–46T. Last previous edition C208–94.
Annual Book of ASTM Standards, Vol 04.06.
3 5
Annual Book of ASTM Standards, Vol 04.10. Available from the U.S. Department of Housing and Urban Development,
Annual Book of ASTM Standards, Vol 04.11. Construction Standards Division, HUD Building, Washington, DC 20410.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
C 208 – 95 (2001)
C846, structural wall sheathing provides adequate racking free of cracks, lumps, excessive departure from planeness, or
resistance for use as exterior wall bracing. other defects that affect performance or appearance.
4.1.5 Type V—Backer board, for use behind exterior finish 8.2 Surface Finish—The surface finishes of the board shall
in wall assemblies where there are no structural requirements. be as specified in Table 2.
4.1.6 Type VI—Roof deck, for use as roof decking for flat, 8.3 Edge Details—The edge details of the board shall be as
pitched, or shed-type, open-beamed, ceiling-roof construction. specified in Table 2.
4.2 On occasion these products are used for other applica-
9. Sampling
tions.Themanufacturerandthepurchasershallagreeuponany
special requirements for such end uses. 9.1 Unless otherwise specified in the purchase order or
contract, the material shall be sampled in accordance with
5. Materials and Manufacture
Criteria C390.
5.1 Cellulosic fiber insulating board shall be manufactured
fromrefinedorpartiallyrefinedligno-cellulosic(woodorcane) 10. Test Methods
fibers, by a felting or molding process, into homogeneous
10.1 Unless otherwise specified in Table 1, determine the
panels. Other ingredients may be added to provide or improve
properties enumerated in this specification in accordance with
certain properties such as strength and water resistance, in
Test Methods C209.
addition to surface finishes for decorative products and special
coatings which impart resistance to flame spread. The material 11. Inspection and Resubmittal
is subjected to such drying temperatures as to effect complete
11.1 Thefollowingrequirementsaregenerallyemployedfor
destruction of rot producing fungi.
purposes of acceptance sampling of lots or shipments of
5.2 The finished board may be either single or multiple ply.
qualified material:
When multiple-ply boards are supplied, a suitable moisture-
11.1.1 Surface finish,
resistant adhesive shall be used to join the plies.
11.1.2 Edge detail,
11.1.3 Dimensional tolerances, and
6. Physical Properties
11.1.4 Workmanship.
6.1 The insulating board shall conform to the physical
11.2 When agreed upon between the purchaser and the
properties in Table 1.
manufacturerorsupplier,theinspectionofthematerialshallbe
1 1
6.2 Roof products with a thickness of 1 ⁄2 in., 2 ⁄2 in., or
made at either the point of shipment or point of delivery.
greater, are post-laminated using thinner board stock whose
11.3 In case of rejection, the manufacturer or supplier shall
properties are covered in Table 1.
have the right to reinspect the rejected shipment and resubmit
the lot after removal of the portion of the shipment not
7. Dimensions, Mass, and Permissible Variations
conforming to the specified requirements.
7.1 The materials covered by this specification are available
in the sizes shown in Table 2.
12. Product Marking
7.2 Length and Width Tolerances—Unless otherwise speci-
12.1 When specified, each panel or unit shall be labeled
fied, the tolerance for length and width of any size panel shall
1 with the manufacturer’s name or trademark, the designation of
by+0,− ⁄16 in. per ft (+0,−5.2 mm/m), but the total
3 this specification, and type and grade. The label may also
tolerance in any dimension shall not exceed+0,− ⁄8 in. (+0
include the mark of a third party certification organization.
mm,−10 mm).
7.3 Thickness Tolerance—The thickness tolerances are
13. Keywords
shown in Table 3.
13.1 backer board; ceiling tiles and panels; cellulosic fiber
8. Workmanship, Finish, and Appearance
insulating board; decorative insulating board; fiberboard; roof
8.1 Defects—Theinsulatingboardshallhavenodefectsthat deck; roof insulation board; sound de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM C168-24(Terminology)
Standard Terminology Relating to Thermal Insulation

SCOPE
1.1 This standard provides definitions, symbols, units, and abbreviations of terms used in ASTM standards pertaining to thermal insulating materials, and to materials associated with them.  
1.2 This terminology is not intended to be used to classify insulation materials as having particular properties. Rather, classification of insulation materials is to be done by the material standards themselves.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM C390-08(2024)(Practice)
Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

SIGNIFICANCE AND USE
4.1 The sampling and inspection prescribed in this practice afford the purchaser a practical level of quality assurance on incoming material. They are based on cost/risk relationships considered typical for preformed thermal insulations offered for general use. In all cases, the purchaser should review this practice and determine its suitability in terms of his specific needs.  
4.2 This procedure is intended primarily for the inspection of a continuing stream of lots, and there is not a high probability of rejecting occasional off lots. Consumer protection is based on economic pressure on the producer, through greater risk of lot rejection, to maintain the process average at 90 % conformance or better. Operating characteristic curves for the sampling plans employed can be found in Practice E2234, Table X-C through Table X-F.  
4.3 It is not the intent of this procedure to estimate lot quality, control the quality of production, relieve the supplier of responsibility for the quality of material offered, or determine the disposition of material found to be defective after receipt by the purchaser.
SCOPE
1.1 This practice covers criteria for establishing the acceptability of lots of shipments of preformed board, preformed block and pipe, and batts and blanket thermal insulation based on sampling and inspection.  
1.2 This practice is intended for use in conjunction with appropriate ASTM material specifications that classify and describe the specific physical requirements for the product in terms of qualification requirements and inspection requirements. Determination of nonconformity shall be based on the tolerances for individual sample test values prescribed in the material specification.  
1.3 This practice may require inspection substantially different from that performed in the normal course of production. If the purchaser requires sampling and acceptance inspection in accordance with this practice, he shall so specify in the order or contract.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM C1630-24(Guide)
Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

SIGNIFICANCE AND USE
5.1 Coverage charts list the required installed and product in-service parameters of minimum thickness, maximum net coverage per package, and minimum mass per unit area to achieve each listed thermal performance (R-value) level. Chart information corresponds to numerous standard R-value levels representing common building codes, industry standards, or legislated requirements (see example in the Appendix X1) and therefore additional chart columns may be required, that is, number of packages per 1 000 ft2 (100m2), and initial installed thickness.  
5.2 This guide applies to coverage charts for installations in open, horizontal attic floor spaces. Chart maximum net coverages are based upon net floor area; framing area deducted. Sloped ceilings, HVAC equipment and ductwork, and other factors can significantly influence product coverage and are to be considered by the manufacturer.
SCOPE
1.1 This guide provides information to manufacturers for the development of a loose-fill thermal insulation product coverage chart. This guide is limited to developing a coverage chart from density versus thickness, apparent thermal conductivity versus density, and thickness versus area mass relationships obtained through product testing.  
1.2 This guide applies to a wide variety of loose-fill thermal insulation products including mineral fiber (Specification C764), or cellulosic fiber (Specification C739) materials; granular types including vermiculite (Specification C516) and perlite (Specification C549); pelletized products; and any other insulation materials that are installed pneumatically or poured in place.  
1.3 Coverage charts for loose-fill insulation products are required by regulation under the United States Federal Trade Commission’s 16 CFR Part 460. Other countries or local governing agencies may have coverage chart requirements in addition to, or that differ from, those presented in this guide; see the Appendix for examples.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM C870-24(Practice)
Standard Practice for Conditioning of Thermal Insulating Materials

SIGNIFICANCE AND USE
5.1 The conditioning prescribed in this recommended practice is designed to obtain reproducible test results on thermal insulating materials. Results of tests obtained on these materials under uncontrolled atmospheric conditions are not comparable with each other. Some of the physical properties of thermal insulating materials are influenced by relative humidity and temperature in a manner that affects the results of tests. In this regard, such information is provided in pertinent material specifications and test methods by stating the physical properties relative to the specific ambient or test conditions.
Note 1: In some cases (for example, dimensionally unstable materials), the dry mass cannot easily be established and original mass has to be used.
SCOPE
1.1 This practice covers the conditioning of thermal insulating materials for tests. Since prior exposure of insulating materials to high or low humidity will affect the equilibrium moisture content, a procedure is also given for preconditioning the materials.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM C1482-24e1(Specification)
Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

ABSTRACT
This specification covers the composition and physical properties of lightweight, flexible open-cell polyimide foam insulation intended for use as thermal and sound-absorbing insulation for a certain temperature range in commercial and industrial environments. The insulations are classified into the following types: Types I, II, III, IV, V, and VI. Polyimide foam shall be manufactured from the appropriate monomers, and necessary compounding ingredients. Different test methods shall be performed in order to determine the following properties of the insulation: density, apparent thermal conductivity, upper temperature limit, high temperature stability, compressive strength, compression deflection, compression set, steam aging, corrosiveness, chemical resistance, surface burning characteristics, radiant panel surface flammability, vertical burn, heat release rate, specific optical smoke density, hydrogen halides in smoke, toxic gas generation, and sound absorption coefficients.
SCOPE
1.1 This specification covers the composition and physical properties of lightweight, flexible open-cell polyimide foam insulation intended for use as thermal and sound-absorbing insulation for temperatures from –328°F up to +572°F (–200°C and +300°C) in commercial and industrial environments.  
1.1.1 Annex A1 includes faced polyimide foam as specified by the U.S. Navy for marine applications.  
1.1.2 This standard is designed as a material specification and not a design document. Physical property requirements vary by application and temperature. No single test is adequate for estimating either the minimum or maximum use temperature of polyimide foam under all possible conditions. Consult the manufacturer for specific recommendations and physical properties for specific applications.  
1.1.3 The use of an appropriate vapor retarder is required in all applications where condensation could occur and cause a decrease in thermal performance or affect other system properties.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.
Note 1: The subject matter of this material specification is not covered by any other ASTM specification. There is no known ISO standard covering the subject of this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    11 pages
    English language
    sale 15% off
ASTM
ASTM C739-24(Specification)
Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

ABSTRACT
This specification covers the composition and physical requirements of chemically treated, recycled cellulosic fiber loose-fill type thermal insulation for installation in attics or enclosed spaces in housing and other buildings by pneumatic or pouring method. While the products are used in various constructions, they are adaptable primarily, but not exclusively, to wood joists, rafters, and stud constructions. The basic material shall be made from selected paper, paperboard stock, or ground wood stock, excluding contaminated materials, which may reasonably be expected to be retained in the finished product. Suitable chemicals are introduced to provide properties such as flame resistance, processing, and handling characteristics. Products shall be prepared suitably to undergo test methods, for which they should comply with the following physical and chemical property requirements: corrosiveness; critical radiant flux; fungi resistance; moisture vapor sorption; odor emission; smoldering combustion; and thermal resistance.
SCOPE
1.1 This specification covers the composition and physical requirements of chemically treated, recycled cellulosic fiber loose-fill type thermal insulation for use in attics or enclosed spaces in housing, and other framed buildings within the ambient temperature range from −45 to 90°C by pneumatic or pouring application. While products that comply with this specification are used in various constructions, they are adaptable primarily, but not exclusively, to wood joist, rafters, and stud construction.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    10 pages
    English language
    sale 15% off
  • Technical specification
    10 pages
    English language
    sale 15% off
ASTM
ASTM C549-23(Specification)
Standard Specification for Perlite Loose Fill Insulation

ABSTRACT
This specification covers the standard for the composition and physical properties of expanded perlite loose fill insulation. This specification also covers the testing procedures used in determining the acceptability of the materials which deal primarily with material performance in the temperature range associated with the thermal envelope of buildings. This specification also covers the standard for surface-treated perlite proposed for use in dust suppression. Requirements for the insulation shall include conformance to standard of the following: bulk density, grading, thermal resistance, moisture absorption, combustibility, surface burning characteristics, and dust suppression.
SCOPE
1.1 This specification covers the composition and physical properties of expanded perlite loose fill insulation. The specification includes the testing procedures by which the acceptability of the material is determined. These testing procedures deal primarily with material performance in the temperature range associated with the thermal envelope of buildings; however, the commercially usable temperature range for this insulation is from − 459 to 1400°F (1 to 1033 K). For specialized applications, refer to the manufacturer's instructions.  
1.2 The specification covers the composition and properties of perlite that has been surface-treated to produce dust suppression for installations where dust is a factor.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 The following applies to Test Methods E84 and E136—This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.  
1.5 The following applies to Test Methods E84 and E136—Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.  
1.6 When the installation or use of thermal insulation materials, accessories and systems, may pose safety or health problems, the manufacturer shall provide the user appropriate current information regarding any known problems associated with the recommended use of the company's products, and shall also recommend protective measures to be employed in their safe utilization. The user shall establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. For additional precautionary statements, see Section 12.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM C1101/C1101M-23(Test Method)
Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

SIGNIFICANCE AND USE
4.1 Classification of insulation relative to flexibility or rigidity is useful in establishing installation and application characteristics.
SCOPE
1.1 These test methods cover the procedures for the classification of mineral fiber insulation as flexible, resilient flexible, semirigid, or rigid.  
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM C578-23(Specification)
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

ABSTRACT
This specification covers the standards for the types, physical properties and dimensions of cellular polystyrene boards with or without facings or coatings made by molding (EPS) or extrusion (XPS) of expandable polystyrene proposed for use as thermal insulation. This specification, however, does not cover laminated products manufactured with any type of rigid board facer including fiberboard, perlite board, gypsum board, or oriented strand board. All thermal insulation shall be of uniform density and shall contain sufficient flame retardants to meet the oxygen index of requirements. They shall also meet the physical requirements such as thermal resistance, compressive resistance, flexural strength, water vapor permeance, water absorption, dimensional stability, and oxygen index specified herein.
SCOPE
1.1 This specification2 covers the types, physical properties, and dimensions of cellular polystyrene boards with or without facings or coatings made by molding (EPS) or extrusion (XPS) of expandable polystyrene. Products manufactured to this specification are intended for use as thermal insulation for temperatures from –65 to +165°F (–53.9 to +73.9°C). This specification does not apply to laminated products manufactured with any type of rigid board facer including fiberboard, perlite board, gypsum board, or oriented strand board.  
1.1.1 Additional requirements for Types IV and XIII for pipe, tank, and equipment thermal insulation for temperatures from –320 to +165°F (–196 to +73.9°C) are contained in Annex A1.  
1.2 The use of thermal insulation materials covered by this specification is potentially regulated by codes that address fire performance. For some end uses, specifiers need to also address the effect of moisture and wind pressure resistance. Guidelines regarding these end use considerations are included in Appendix X1.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
  • Technical specification
    8 pages
    English language
    sale 15% off
ASTM
ASTM C1676/C1676M-23(Specification)
Standard Specification for Microporous Thermal Insulation

SCOPE
1.1 This specification covers the composition, physical properties, and product forms of microporous thermal insulation for use on surfaces at temperatures from 80°C [176°F] up to 1150°C [2102°F], unless otherwise agreed upon by the manufacturer and purchaser.  
1.2 This specification only covers microporous thermal insulation comprising compacted powder, fibers and opacifiers.  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off