ASTM D3128-07(2021)
(Specification)Standard Specification for 2-Methoxyethanol
Standard Specification for 2-Methoxyethanol
ABSTRACT
This specification covers 2-methoxyethanol. 2-methoxyethanol shall conform to the requirements specified for the following: (1) apparent specific gravity, (2) Pt-Co scale color, (3) distillation range defined by the initial boiling point and dry point, (4) water content, and (5) acidity (free acid as acetic acid). The sampling and test methods to determine conformance to the specified properties are given.
SCOPE
1.1 This specification covers 2-methoxyethanol.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.4 For hazard information and guidance, see the supplier’s Material Safety Data Sheet for materials listed in this specification.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D3128 −07 (Reapproved 2021)
Standard Specification for
2-Methoxyethanol
This standard is issued under the fixed designation D3128; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope Coatings and Material (Withdrawn 2021)
D1078 Test Method for Distillation Range of Volatile Or-
1.1 This specification covers 2-methoxyethanol.
ganic Liquids
1.2 The values stated in SI units are to be regarded as
D1209 Test Method for Color of Clear Liquids (Platinum-
standard. No other units of measurement are included in this
Cobalt Scale)
standard.
D1364 Test Method for Water in Volatile Solvents (Karl
Fischer Reagent Titration Method) (Withdrawn 2021)
1.3 The following applies to all specified limits in this
D1613 Test Method for Acidity in Volatile Solvents and
standard; for purposes of determining conformance with this
Chemical Intermediates Used in Paint, Varnish, Lacquer,
standard, an observed value or a calculated value shall be
and Related Products
rounded off “to the nearest unit” in the last right-hand digit
D4052 Test Method for Density, Relative Density, and API
used in expressing the specification limit, in accordance with
Gravity of Liquids by Digital Density Meter
the rounding-off method of Practice E29.
D5386 Test Method for Color of Liquids Using Tristimulus
1.4 For hazard information and guidance, see the supplier’s
Colorimetry
Material Safety Data Sheet for materials listed in this specifi-
E29 Practice for Using Significant Digits in Test Data to
cation.
Determine Conformance with Specifications
1.5 This standard does not purport to address all of the E300 Practice for Sampling Industrial Chemicals
safety concerns, if any, associated with its use. It is the 2.2 U.S. Federal Standard:
responsibility of the user of this standard to establish appro- PPP-C-2020 Specification for Packaging of Chemicals,
priate safety, health, and environmental practices and deter- Liquid, Dry, and Paste
mine the applicability of regulatory limitations prior to use.
3. Properties
1.6 This international standard was developed in accor-
dance with internationally recognized principles on standard- 3.1 2-Methoxyethanol shall conform to the following re-
ization established in the Decision on Principles for the
quirements:
Development of International Standards, Guides and Recom-
Apparent specific gravity:
mendations issued by the World Trade Organization Technical 20/20 °C 0.963 to 0.967
or
Barriers to Trade (TBT) Committee.
25/25 °C 0.960 to 0.964
Color, Pt-Co scale, max (Note 1) 15
Distillation range:
2. Referenced Documents
Initial boiling point, °C, min 123
Dry point, °C, max 126
2.1 ASTM Standards:
Water, weight, % max 0.2
D268 Guide for Sampling and Testing Volatile Solvents and
Acidity (free acid as acetic acid), 0.01, equivalent to 0.093 mg of KOH
Chemical Intermediates for Use in Paint and Related
weight, % max per gram of material
NOTE 1—Instrumental Pt-Co color determined by Test Method D5386
has been shown to have no statistically significant difference from Pt-Co
color determined by Test Method D1209. However, it is not known
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.