iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F3356-18

(Specification)

Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security

Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security

SCOPE
1.1 This specification establishes the conformity assessment requirements for security systems and equipment. The design and testing requirements for a product’s conformity assessment are specified in the applicable ASTM performance standards developed by the ASTM F12 Committee on Security Systems and Equipment.  
1.2 Conformity assessment requirements ensure the consistent application of the ASTM performance standards and establish requirements of the certification body’s accreditation process and operation of certification programs.  
1.3 Certification bodies, to acquire or maintain accreditation, shall meet and continue to meet the requirements established by this specification, including any matter incorporated by reference.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Historical
Publication Date
30-Nov-2018
ICS
13.310 - Protection against crime
Technical Committee
F12 - Security Systems and Equipment
Drafting Committee
F12.60 - Controlled Access Security, Search, and Screening Equipment
Current Stage
Ref Project

Relations

Replaced By
ASTM F3356-19 - Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security
Effective Date
01-Apr-2019
Referred By
ASTM F3020-20 - Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security
Effective Date
01-Dec-2018
Referred By
ASTM F3278-20 - Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security
Effective Date
01-Dec-2018

Buy Standard

ASTM F3356-18 - Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and SecurityASTM F3356-18 - Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security
PreviousNext
Technical specification
ASTM F3356-18 - Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security
English language
94 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F3356 −18
Standard Specification for
Conformity Assessment of Metal Detectors Used in Safety
1
and Security
This standard is issued under the fixed designation F3356; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope tectors Used in Safety and Security
3
2.2 ISO Standards:
1.1 This specification establishes the conformity assessment
ISO 9001:2008 Quality management systems – Require-
requirements for security systems and equipment. The design
ments
andtestingrequirementsforaproduct’sconformityassessment
ISO 9001:2015 Quality management systems – Require-
are specified in the applicable ASTM performance standards
ments
developed by the ASTM F12 Committee on Security Systems
ISO/IEC 17000 Conformity assessment – Vocabulary and
and Equipment.
general principles
1.2 Conformity assessment requirements ensure the consis-
ISO/IEC 17025 General requirements for the competence of
tent application of the ASTM performance standards and
testing and calibration laboratories
establish requirements of the certification body’s accreditation
ISO/IEC 17065 Conformity assessment – Requirements for
process and operation of certification programs.
bodies certifying products, processes and services
1.3 Certification bodies, to acquire or maintain
3. Terminology
accreditation, shall meet and continue to meet the requirements
established by this specification, including any matter incorpo- 3.1 Definitions of Terms Specific to This Standard:
3.1.1 accreditation, n—third-party attestation related to a
rated by reference.
conformity assessment body conveying formal demonstration
1.4 This standard does not purport to address all of the
of its competence to carry out specific conformity assessment
safety concerns, if any, associated with its use. It is the
tasks. ISO/IEC 17000
responsibility of the user of this standard to establish appro-
3.1.2 audit, n—systematic, independent, documented pro-
priate safety, health, and environmental practices and deter-
mine the applicability of regulatory limitations prior to use. cess for getting records, statements of fact, or other relevant
1.5 This international standard was developed in accor- information and assessing them objectively to determine the
dance with internationally recognized principles on standard- extent to which specified requirements are fulfilled.
ization established in the Decision on Principles for the ISO/IEC 17000
Development of International Standards, Guides and Recom-
3.1.3 certification, n—a system whereby a third party inde-
mendations issued by the World Trade Organization Technical
pendent organization determines that a supplier has demon-
Barriers to Trade (TBT) Committee.
strated the ability to make a product that complies with the
requirements of the specification, authorizes the supplier to use
2. Referenced Documents
a label on products that comply with the requirements of the
2
specification, and conducts a follow-up surveillance program
2.1 ASTM Standards:
F3020 Performance Standard for Hand-Worn Metal Detec- to verify the methods the supplier uses to determine confor-
tors Used in Safety and Security mance with the requirements of the specification.
F3278 Performance Specification for Hand-Held Metal De-
3.1.4 certification body, n—third-party conformity assess-
ment body operating certification schemes and attests to the
conformity of products.
1
This specification is under the jurisdiction of ASTM Committee F12 on
3.1.5 certified product, n—product that has successfully
Security Systems and Equipment and is the direct responsibility of Subcommittee
been tested and found to conform by an appropriately accred-
F12.60 on Controlled Access Security, Search, and Screening Equipment.
Current edition approved Dec. 1, 2018. Published January 2019. DOI: 10.1520/
ited certification body.
F3356-18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
3
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Available from International Organization for Standardization (ISO), ISO
Standards volume information, refer to the standard’s Document Summary page on Central Secretariat, BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier,
the ASTM website. Geneva, Switzerland, http://www.iso.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F3356 − 18
3.1.6 certified product listing, n—a publicly accessible list- tors or Performance Specification F3278 for hand-held metal
ing of certified products. det
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F476-23(Test Method)
Standard Test Methods for Security of Swinging Door Assemblies

SCOPE
1.1 These test methods cover door assemblies of various materials and types of construction for use in wall openings to deter unwanted intruders.  
1.2 Door assemblies, covered by these test methods, also include individual components such as the hinge, lock, door, strike, and jamb.  
1.3 These test methods are designed to measure the capability of a swinging door assembly to restrain or delay and frustrate the commission of “break-in” crimes.  
1.4 These test methods apply primarily to typical entry door assemblies.  
1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    English language
    sale 15% off
ASTM
ASTM F3566-22(Specification)
Standard Performance Specifications and Test Methods for Walk-Through Metal Detectors Used in Safety and Security

SCOPE
1.1 This standard applies to all walk-through metal detectors that are used to find metal contraband concealed or hidden on people.  
1.2 This standard describes baseline acceptable technical performance requirements, which includes metal object detection performance, safety (electrical, mechanical, fire), electromagnetic compatibility, environmental conditions and ranges, and mechanical durability. The requirements for metal detection performance are unique and, therefore, test methods for these parameters are provided, including the design of test objects. An agency or organization using this standard is encouraged to add their unique operationally-based requirements to those requirements listed in this baseline technical performance standard.
Note 1: For ease of use, steps of test procedures in this standard are indicated by numbered lists.  
1.3 This standard describes the use of threat object exemplars, instead of actual threat objects, to test the detection performance of walk-through metal detectors.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    26 pages
    English language
    sale 15% off
ASTM
ASTM C1238-97(2021)(Guide)
Standard Guide for Installation of Walk-Through Metal Detectors

SIGNIFICANCE AND USE
4.1 This guide is intended for use by the designers, evaluators, and users of walk-through metal detectors to be installed to screen persons entering or leaving a controlled access area. This guide is not meant to constrain design liberty but is to be used as a guide in the selection of location and installation of walk-through metal detectors.
SCOPE
1.1 Some facilities require that personnel entering designated areas be screened for concealed weapons and other metallic materials. Also, personnel exiting designated areas are often screened for metallic shielding material and other types of metallic contraband. Walk-through metal detectors are widely used to implement these requirements. This guide describes various elements to be considered when planning to install walk-through metal detectors.  
1.2 This guide is not intended to set performance levels, nor is it intended to limit or constrain operational technologies.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    5 pages
    English language
    sale 15% off
ASTM
ASTM F3356-19a(Practice)
Standard Practice for Conformity Assessment of Metal Detectors Used in Safety and Security

SCOPE
1.1 This specification establishes the conformity assessment requirements for security systems and equipment. The design and testing requirements for a product’s conformity assessment are specified in the applicable ASTM performance standards developed by the ASTM F12 Committee on Security Systems and Equipment.  
1.2 Conformity assessment requirements ensure the consistent application of the ASTM performance standards and establishes requirements of the certification body’s accreditation process and operation of certification programs.  
1.3 Certification bodies, to acquire or maintain accreditation, shall meet and continue to meet the requirements established by this specification, including any matter incorporated by reference.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1247-89(2018)(Specification)
Standard Specification for Intrusion Resistant Generic Vault Structures

ABSTRACT
This specification is for the use and guidance of those who purchase, design, construct, install, approve, or modify generic vault structures intended for protection of valuables against loss due to forced entry. It also includes the descriptions of terms, classifications, materials, practices, and methods to be followed in constructing, fabricating, or modifying intrusion resistant generic vaults. The vault shall be rated as a unit and that rating shall be determined by the component having the lowest classification. The walls, floor, and ceiling of a vault shall be formed or composed of materials without “true” joints or seams, with the exception of “cold” concrete seams necessitated by construction technique. Components of a building shall not be used as part of the vault unless constructed to provide the equivalent intrusion resistance. The vault enclosure shall be classified into four types: Type M, Type 1, Type 2, and Type 3. Materials to be used in the construction of vault structures shall include concrete, concrete reinforcements, conduit, and grout.
SIGNIFICANCE AND USE
8.1 This specification provides guidelines for the selection of a generic vault, in accordance with its intended use.  
8.2 This specification is intended to assist users in availing themselves of various generically constructed products, while maintaining consistency with their selected intrusion-resistance level.  
8.3 This specification is not meant to recommend or prefer the use of any single product, any type level, or its application.
SCOPE
1.1 This specification is for the use and guidance of those who purchase, design, construct, install, approve, or modify generic vault structures intended for protection of valuables against loss due to forced entry.  
1.2 This specification includes the descriptions of terms, classifications, materials, practices, and methods to be followed in constructing, fabricating, or modifying intrusion resistant generic vaults.  
1.3 This specification does not address fire resistivity, nor does it address modular panels.  
1.4 This specification is not intended to prevent the use of systems, methods, or devices that provide a level of intrusion resistance equivalent or better than that prescribed herein. Any system, method, or device different from that detailed herein may be examined, in accordance with the intent of this specification, and if found to be equivalent or better, may be included.  
1.5 Nothing in this specification shall be construed to prohibit better or safer conditions than the requirements specified herein.  
1.6 Materials and construction details outlined in this specification are intended to detail protective requirements necessary to achieve the required level of intrusion resistance, and are not intended to address structural soundness or operational fitness, areas for which the project engineer, architect, or equipment supplier are responsible.  
1.7 Each referenced document cited in Section 2 shall be meant to be the edition in effect on the date this specification was published.  
Note 1: A rationale is given in Appendix X1.  
1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.9 The following precautionary statement pertains to the test method portion only, Section 9, of this specification:  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International...

  • Technical specification
    8 pages
    English language
    sale 15% off
ASTM
ASTM F792-17e1(Practice)
Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems

SCOPE
1.1 This practice applies to all X-ray-based screening systems with tunnel apertures up to 1 m wide × 1 m high, whether they are conventional X-ray systems or explosives detection systems, that provide a projection or projection/scatter image.  
1.2 This practice applies to X-ray systems used for the screening for prohibited items such as weapons, explosives, and explosive devices in baggage, packages, cargo, or mail.  
1.3 This practice establishes quantitative and qualitative methods for evaluating the systems. This practice does not establish minimum performance requirements for any particular application.  
1.4 This practice relies upon the use of three different standard test objects: ASTM X-ray test object – HP, for evaluating human perception based performance parameters; ASTM X-ray test object – RT, for routine testing to assess operation; and ASTM X-ray test object – OE, for objective evaluation and scoring of the technical capability of the system. The specific test objects are subsequently described and referred to in this practice as the HP test object, RT test object, and OE test object.  
1.4.1 Part RT—This part considers only the methods for routine and periodic verification of system operation and function, and therefore requires use of ASTM X-ray test object – RT.  
1.4.2 Part HP—This part considers only the methods for, and use of, the ASTM X-ray test object – HP.  
1.4.3 Part OE—This part considers only the methods for objective evaluation of the technical capabilities of a system, and therefore requires use of the ASTM X-ray test object – OE.  
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    44 pages
    English language
    sale 15% off
ASTM
ASTM F571-87(2016)(Practice)
Standard Practice for Installation of Exit Devices in Security Areas

SIGNIFICANCE AND USE
4.1 This practice is not meant to include products other than exit devices except to the extent that such products directly relate to the use of exit devices. When other products are described, the security attributes of the other products are described generally in the documents referenced in Section 2.
SCOPE
1.1 This practice provides information for the installation of exit devices used in areas of security to achieve the greatest security possible without violating the requirements and spirit of NFPA 101.  
1.2 Security of a high level is not always possible with these products but the use of certain types and functions of exit devices will afford a much higher degree of security than the use of other types and functions.  
1.3 The values as stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F2814-23(Guide)
Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

SIGNIFICANCE AND USE
4.1 Ornamental steel picket fence systems can be designed to provide greater levels of security by selecting styles and configurations that increase the difficulty to penetrate and in turn increase delay time. Some examples include: increasing the height of the fence, using ornamental picket styles that curve outward to form a parapet on the attack side of the fence, and decreasing the spacing between vertical pickets.  
4.2 Security hardening of ornamental steel picket fence systems can be achieved by adding fence security accessories (that is, barbed wire to the top; barbed tape to the top, side or bottom of the fence; or spiked railing supplements along the top rail) or by attaching supplemental security fence fill materials (that is, expanded metal, barbed tape mesh, welded wire mesh, or chain-link mini-mesh fabric). Slats or screening panels can be inserted to restrict visibility when required.  
4.3 Multiple fence lines can be installed to create isolation zones that enhance the ability to patrol or visually monitor the area.  
4.4 Anti-ram cable systems may be added to resist vehicle penetration into a protected perimeter.
SCOPE
1.1 This guide covers the material and installation standards for selection in the design of an ornamental steel picket fence system for security applications. The proper material selection and system installation and layout can substantially increase the difficulty to penetrate; thereby, increasing the intrusion delay time.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This guide is not intended to set specific requirements for an ornamental steel picket fence system for security purposes. It intends to cover the considerations or options pertinent to the design and construction of ornamental steel picket fence systems for security purposes.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM E2057-23(Specification)
Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Violence Investigations

ABSTRACT
These specifications describe the basic elements of a request for the scientific examination of physical evidence collected in the investigation of a sexual assault. These specifications outline considerations that will facilitate the analysis of sexual assault evidence by a potentially large group of forensic experts. The request for scientific examination of sexual assault evidence should include a completed sexual assault medical/nurse sexual assault examiner/medical examiner evaluation form in accordance with the requirements.
SIGNIFICANCE AND USE
5.1 These specifications are designed to ensure that evidence associated with a sexual violence investigation is handled and analyzed in the most useful manner and without wasting evidentiary materials and analytical time or resources, or both.
SCOPE
1.1 These specifications describe the basic elements of a request for the scientific examination of physical evidence collected in the investigation of a sexual violence incident. These specifications are designed to be used in conjunction with other specifications, guides, and practices associated with sexual violence examinations that are listed in Section 2.  
1.2 These specifications outline considerations that facilitate the analysis of sexual violence evidence by forensic experts. These experts can include, but are not limited to, serologists, toxicologists, pathologists, odontologists, latent print examiners, firearm and toolmark examiners, and trace materials analysts. The success of their combined work requires a clear understanding of the issues and relationships involved in the case.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM E3113-23(Specification)
Standard Specification for Ballistic-resistant Vehicle Door Panels Used by Public Safety Agencies

SCOPE
1.1 This specification specifies requirements for ballistic-resistant panels to be mounted in or on public safety vehicle doors to protect against complete penetration of projectiles from small arms.2  
1.2 The purpose of this specification is to define minimum performance for ballistic-resistant vehicle door panels.  
1.2.1 In addition to the required tests, optional tests with specific conditions are provided that allow testing beyond the minimum requirements of this specification. Statements of conformance with this specification do not include any optional test unless the optional test is conducted, and the results are included in the test report.  
1.3 This specification requires ballistic testing of vehicle door panels mounted either in a test fixture or mounted on a vehicle door for which the panel is designed.  
1.3.1 Door panels intended to be mounted inside a vehicle door shall be assessed in a test fixture with air backing.
1.3.1.1 Two optional ballistic tests are provided for vehicle door panels intended to be mounted inside a vehicle door:
(1) The preferred optional ballistic test assesses the panel in a vehicle door for which the panel is designed.
(2) If a vehicle door for which the panel is designed is not available, a second optional ballistic test assesses the panel in a test fixture with air backing and a door skin simulant in front of the strike face of the panel.  
1.3.2 Door panels intended to be mounted on the exterior of a vehicle door shall be assessed on a vehicle door for which the panel is designed.  
1.3.3 An optional extreme temperature ballistic test is provided for purchasers concerned with performance of vehicle door panels in very hot or very cold environments.  
1.3.4 The optional ballistic tests are provided in Appendix X1.  
1.4 Selection and procurement guidance is provided in Appendix X2 to assist purchasers in using this specification to procure vehicles with ballistic-resistant door panels or to retrofit existing vehicles with ballistic-resistant door panels.  
1.5 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to non-SI units that are provided for information only.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    9 pages
    English language
    sale 15% off
  • Technical specification
    9 pages
    English language
    sale 15% off