ASTM E2893-13
(Guide)Standard Guide for Greener Cleanups
Standard Guide for Greener Cleanups
SIGNIFICANCE AND USE
4.1 Purpose—This guide provides a process for evaluating implementing, documenting, and reporting activities to reduce the environmental footprint of a cleanup as defined by the following core elements.
4.1.1 Minimize Total Energy Use and Maximize Use of Renewable Energy—Reducing total energy use while also identifying means to increase the use of renewable energies throughout the cleanup. Possible methods may include reducing energy use, use of energy efficient equipment, use of onsite renewable resources (for example, wind, solar), and purchase of commercial energy from renewable resources.
4.1.2 Minimize Air Pollutants and Greenhouse Gas Emissions—Reducing total air emissions, including emissions of air pollutants and greenhouse gases, throughout the cleanup. Possible methods may include minimizing the generation and transport of airborne contaminants and dust, efficient use of emitting equipment (for example, vehicles and heavy equipment), use of advanced emission controls, and use of cleaner fuels or hybrid technologies.
4.1.3 Minimize Water Use and Impacts to Water Resources—Minimizing the use of water and impacts to water resources throughout the cleanup. Possible methods may include conserving water use in cleanup processes, use of water efficient products, water capture and reclamation for reuse, water efficient revegetation, and employing traditional BMPs for storm water, erosion, and sedimentation control.
4.1.4 Reduce, Reuse, and Recycle Materials and Waste—Minimizing the use of virgin materials and generation of waste throughout the cleanup as well as maximizing the use of recycled materials. Possible methods may include using recycled and locally generated materials, reusing waste materials (for example, concrete made with coal combustion products), diverting construction and demolition debris from disposal by recycling recovered resources, and using rapidly renewable materials or certified wood products.
4.1.5 Protect Land and Ecosystem...
SCOPE
1.1 Cleaning up sites improves environmental and public health conditions and as such can be viewed as “green.” However, cleanup activities use energy, water, and natural resources. The process of cleanup therefore creates its own environmental footprint. This guide describes a process for evaluating and implementing activities to reduce the environmental footprint of a cleanup project in the United States while working within the applicable regulatory framework and satisfying all applicable legal requirements.
1.2 This guide may also be used as a framework for sites that are not located in the United States; however, the specific legal references are not applicable.
1.3 This guide describes a process for identifying, evaluating, and incorporating best management practices (BMPs) and, when deemed appropriate, for integrating a quantitative evaluation into a cleanup to reduce its environmental footprint.
1.4 This guide is designed to be implemented in conjunction with any cleanup process and should be used with other technical tools, guidance, policy, laws, and regulations to integrate greener cleanup practices, processes, and technologies into cleanup projects.
1.5 This guide provides a process for evaluating and implementing activities to reduce the environmental footprint of a cleanup and is not designed to instruct users on how to clean up contaminated sites.
1.6 ASTM also has a guide on Integrating Sustainable Objectives into Cleanups (E2876). That guide provides a broad framework for integrating elements of environmental, economic, and social aspects into cleanups. This guide may provide assistance with implementing E2876 and other sustainable remediation guidance, such as Holland, et al. (2011)(1).
1.7 This guide specifically applies to the cleanup, not the redevelopment, of a site. However, the reasonably anticipated use of a site, if known, may influence the cleanup goals and scope.
1.8 This ...
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E2893 − 13
StandardGuide for
1
Greener Cleanups
This standard is issued under the fixed designation E2893; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 1.8 This guide should not be used as a justification to avoid,
minimize, or delay implementation of specific cleanup activi-
1.1 Cleaning up sites improves environmental and public
ties. Nor should this guide be used as a justification for
health conditions and as such can be viewed as “green.”
selecting cleanup activities that compromise stakeholder inter-
However, cleanup activities use energy, water, and natural
ests or goals for the site.
resources. The process of cleanup therefore creates its own
environmental footprint. This guide describes a process for 1.9 This guide does not supersede federal, state, or local
evaluating and implementing activities to reduce the environ- regulations relating to protection of human health and the
mental footprintofa cleanupprojectintheUnitedStateswhile environment.Noactiontakeninconnectionwithimplementing
working within the applicable regulatory framework and sat- this guide should generate unacceptable risks to human health
isfying all applicable legal requirements. or the environment.
1.2 This guide may also be used as a framework for sites
1.10 This guide may be integrated into complementary
that are not located in the United States; however, the specific standards, site-specific regulatory documents, guidelines, or
legal references are not applicable.
contractualagreementsrelatingtosustainableorgreenerclean-
ups.
1.3 This guide describes a process for identifying,
1.10.1 If the cleanup is governed by a regulatory program,
evaluating, and incorporating best management practices
the user should discuss with the regulator responsible for site
(BMPs) and, when deemed appropriate, for integrating a
oversight how this guide could be incorporated into the
quantitative evaluation into a cleanup to reduce its environ-
cleanup and whether the regulator deems it appropriate for the
mental footprint.
usertoreporttheprocessandresultstotheregulatoryprogram.
1.4 This guideisdesignedtobeimplementedinconjunction
1.10.2 The contractual relationship or legal obligations
with any cleanup process and should be used with other
existing between and among the parties associated with a site
technical tools, guidance, policy, laws, and regulations to
or site cleanup are beyond the scope of this guide.
integrate greener cleanup practices, processes, and technolo-
1.11 This guide is composed of the following sections:
gies into cleanup projects.
Referenced Documents (Section 2); Terminology (Section 3);
1.5 This guide provides a process for evaluating and imple-
Significance and Use (Section 4); Planning and Scoping
menting activities to reduce the environmental footprint of a
(Section 5); BMP Process (Section 6); Quantitative Evaluation
cleanup and is not designed to instruct users on how to clean
(Section 7); Documentation and Reporting (Section 8); and
up contaminated sites.
Keywords (Section 9).
1.6 ASTM also has a guide on Integrating Sustainable
1.12 This standard does not purport to address all of the
Objectivesinto Cleanups(E2876).That guideprovidesabroad
safety concerns, if any, associated with its use. It is the
framework for integrating elements of environmental,
responsibility of the user of this standard to establish appro-
economic, and social aspects into cleanups. This guide may
priate safety and health practices and determine the applica-
provideassistancewithimplementingE2876andothersustain-
bility of regulatory limitations prior to use.
able remediation guidance, such as Holland, et al. (2011)(1).
2. Referenced Documents
1.7 This guide specifically applies to the cleanup, not the
2
redevelopment, of a site. However, the reasonably anticipated
2.1 ASTM Standards:
use of a site, if known, may influence the cleanup goals and
E1527 Practice for Environmental SiteAssessments: Phase I
scope.
Environmental Site Assessment Process
1
ThisguideisunderthejurisdictionofASTMCommitteeE50onEnvironmental
2
Assessment, Risk Management and CorrectiveAction and is the direct responsibil- For referenced ASTM standards, visit the ASTM website, www.astm.org, or
ity of Subcommittee E50.04 on Corrective Action. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved Sept. 15, 2013. Published November 2013. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/E2893-13. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.