iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D2834-95(2008)

(Test Method)

Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

SIGNIFICANCE AND USE
Nonvolatile matter determination is useful as a quality control test, when used in conjunction with other tests, to assure specification compliance.
SCOPE
1.1 This test method covers the determination of nonvolatile matter (total solids) in a water-emulsion, organic solvent-based liquid and paste floor polishes, and polymer-emulsion-type floor polishes.
1.2 This test method recognizes that the products may contain material that will slowly volatilize or change chemically with a resulting change in weight of the nonvolatile matter. Therefore, since drying to constant weight is impractical, specific drying times have been selected.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
29-Feb-2008
ICS
71.100.99 - Other products of the chemical industry
Technical Committee
D21 - Polishes
Drafting Committee
D21.03 - Chemical and Physical Testing
Current Stage
Ref Project

Relations

Replaces
ASTM D2834-95(2002) - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
Effective Date
01-Mar-2008
Referred By
ASTM D3757-16 - Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
Effective Date
01-Mar-2008
Referred By
ASTM D4095-97(2020) - Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
Effective Date
01-Mar-2008
Referred By
ASTM D3440-13(2019) - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
Effective Date
01-Mar-2008
Referred By
ASTM D4078-02(2021) - Standard Specification for Water Emulsion Floor Polish
Effective Date
01-Mar-2008
Referred By
ASTM D3837-95(2019) - Standard Practice for Preparing a Solution of Alkali–Soluble Resins
Effective Date
01-Mar-2008
Referred By
ASTM D4800-94(2023) - Standard Guide for Classifying and Specifying Adhesives
Effective Date
01-Mar-2008

Buy Standard

ASTM D2834-95(2008) - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor PolishesASTM D2834-95(2008) - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
PreviousNext
Standard
ASTM D2834-95(2008) - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D2834 − 95(Reapproved 2008)
Standard Test Method for
Nonvolatile Matter (Total Solids) in Water-Emulsion Floor
Polishes, Solvent-Based Floor Polishes, and Polymer-
Emulsion Floor Polishes
This standard is issued under the fixed designation D2834; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 3.2.1 Drying Oven, Convection-Type, capable of maintain-
ing a temperature of 105.0 6 2.5°C (221.0 6 4.5°F). If many
1.1 This test method covers the determination of nonvolatile
determinations of solvent-based floor polishes are being made
matter (total solids) in a water-emulsion, organic solvent-based
at the same time, an explosion-proof oven should be used.
liquid and paste floor polishes, and polymer-emulsion-type
floor polishes.
4. Sampling
1.2 This test method recognizes that the products may
4.1 The sample shall be thoroughly representative of the
contain material that will slowly volatilize or change chemi-
material in question, and the test specimen shall be thoroughly
cally with a resulting change in weight of the nonvolatile
representative of the sample itself.
matter. Therefore, since drying to constant weight is
impractical, specific drying times have been selected.
5. Procedure
1.3 The values stated in SI units are to be regarded as the
5.1 Bring the material to be tested to equilibrium tempera-
standard. The values given in parentheses are for information
ture at 23 6 2°C (73.4 6 3.6°F).
only.
1.4 This standard does not purport to address all of the
5.2 Making the determination in duplicate, place approxi-
safety concerns, if any, associated with its use. It is the mately2gof water-emulsion floor polish, or solvent-based
responsibility of the user of this standard to establish appro-
floor polish specimen, or 1 g of polymer-emulsion-type floor
priate safety and health practices and determine the applica- polish specimen into a tared, dried, flat-bottom aluminum dish
bility of regulatory limitations prior to use.
of the previously specified size.Weigh rapidly, and place in the
oven maintained at 102.5 to 107.5°C. The starting time in the
2. Significance and Use
oven is the point at which the oven has returned to temperature
2.1 Nonvolatile matter determination is useful as a quality after loading. After heating for 4 h for water-emulsion floor
control test, when used in conjunction with other tests, to polish, 16 h for solvent-based floor polish, or 2 h for polymer-
assure specification compliance. emulsion-type floor polishes. Cool in a desiccator.Weigh to the
nea
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D3153-23(Test Method)
Standard Test Method for Recoatability of Water-Emulsion Floor Polishes

SIGNIFICANCE AND USE
4.1 The essential practical usage of water-emulsion floor polishes as renewable coatings to protect and beautify floors depends upon satisfactory recoatability. This test method is useful both in product development and final product testing as a means of evaluating recoatability.
SCOPE
1.1 This test method covers the determination of the effects of the application of a water-emulsion floor polish over a dried coating of the same polish. The method is designed for laboratory bench panel testing. A method is also provided for large area testing. A rating system is provided to indicate the acceptability of the polish based on recoatability performance.  
Note 1: Recoatability of a water-emulsion floor polish is a general-performance property, and the determination of it is dependent upon the observation of several other properties of the polish under the specific conditions expressed in this test method. This test method for recoatability is not designed for the evaluation of other properties, except as these properties relate to the recoatability of the specific polish being evaluated under the conditions of this test.  
1.2 Gloss as observed herein extends only to freedom from loss of apparent visual gloss upon recoating, in the execution of this test method, and should this loss occur, it indicates a distortion of the property of gloss, by recoating.  
1.3 A degree of recoatability failure may be reflected from a degree of leveling failure. The failure to level should be observed only if it is to be a part of the observation of recoatability.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D2048-23(Test Method)
Standard Test Method for Powdering of Floor Polish Films

SIGNIFICANCE AND USE
4.1 This is a comparative test method. If this method does not indicate powdering, it is still possible that the product in actual use may powder. Reference polishes should be used for comparison.
SCOPE
1.1 This test method covers a bench procedure for the determination of the degree of powdering of floor polishes under ambient conditions as well as conditions of low relative humidity.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3206-23(Test Method)
Standard Test Method for Soil Resistance of Floor Polishes

SIGNIFICANCE AND USE
3.1 This test method measures the ability of a floor polish to resist soiling by a standard soil that approximates dirt carried in from the outside.
SCOPE
1.1 This test method covers the determination of soil resistance of floor polishes on test tile only. A carpet covered roller is used to simulate the action of foot traffic. A synthetic soil is employed in conjunction with the roller.  
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1793-23(Test Method)
Standard Test Method for Water Spotting of Emulsion Floor Polishes

SIGNIFICANCE AND USE
4.1 This test method measures the ability of a floor polish to resist spotting by water. This test method may be used to measure the extent of damage by a large amount of water or in a separate method to measure the amount of damage by a small amount of water that has evaporated to dryness. Reference polishes should be used for comparison.
Note 1: The test method may induce slight whitening, color change, noticeable change in appearance, including removal of the film, which is caused by contact with water.
SCOPE
1.1 This test method covers the determination of water spotting resistance of water emulsion floor polishes. The test method approximates the actual conditions of water spotting encountered in service.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3052-23(Practice)
Standard Practice for Rating Water-Emulsion Floor Polishes

SIGNIFICANCE AND USE
3.1 When comparing different floor polishes for an actual field performance, it is important that all surfaces used be prepared in the same way. When this procedure is followed, variations in the test surfaces are minimized.
SCOPE
1.1 This practice covers the comparison of the performance of water-emulsion floor polishes on test floors against a reference material. It is applicable to the following types of polishes:  
1.1.1 Wax emulsion polishes,  
1.1.2 Nonbuffable emulsion polishes,  
1.1.3 Detergent-resistant emulsion polishes, household type, and  
1.1.4 Detergent-resistant emulsion polishes, industrial type.  
1.2 Gloss, leveling, discoloration, traffic marking, slip resistance, and removal ease of these types of floor polishes is rated in comparison to a reference material. Where applicable, detergent resistance is also evaluated. This method is not to be considered as a recommended maintenance procedure.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D1792-17(2023)(Test Method)
Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

SIGNIFICANCE AND USE
4.1 This test method is used to predict removability of floor polish after a treatment period that simulates aging in the field. It allows for uniform mechanical and detergent action leaving the only variable the actual removability of the polish.
SCOPE
1.1 This test method covers the determination of the relative ease of removal of dried films of water-emulsion floor polishes from common flooring substrates under accelerated conditions, which correspond to extended service aging.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D1455-17(2023)(Test Method)
Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

SIGNIFICANCE AND USE
4.1 This test method may be used to evaluate the difference in gloss of dried films of emulsion floor polishes when the light reflected at a 60° angle is measured. Extremely high- or low-gloss polishes may not be differentiated at a 60° angle. A20° angle measured in accordance with Test Method D523 may give better definition of gloss.
SCOPE
1.1 This test method covers the determination of the 60° specular gloss of films of emulsion floor polish after application to a substrate.  
Note 1: Specular gloss is one of several related appearance attributes that produce the sensation of glossiness. For this reason, specular gloss measurements may not always correlate well with visual rankings of glossiness.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3209-93(2023)(Test Method)
Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

SIGNIFICANCE AND USE
3.1 This test method is used to determine the effect of freezing on floor polishes. It may be used to predict the stability of a floor polish when exposed to freezing.
SCOPE
1.1 This test method covers the determination of the stability of polymer emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5678-17(2023)(Test Method)
Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

SIGNIFICANCE AND USE
3.1 This test method is used to determine the effect of freezing on wax emulsion floor polishes. It may be used to predict the stability of a floor polish in transit or when exposed to freezing, and whether or not the polish is damaged by freezing.
SCOPE
1.1 This test method covers the determination of the stability of wax emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4002-81(2023)(Practice)
Standard Practice for Evaluation of Buffable Shoe Polish

SIGNIFICANCE AND USE
3.1 This practice is intended to define the properties to be tested, the apparatus to use, and the comparisons of product performance. It is recognized that considerable discretion exists among formulators and marketers of shoe polish on what properties or performance characteristics are best for their products. This practice will be flexible to honor this fact within the confines of the shoe polish definition in 2.1.
SCOPE
1.1 This practice covers the definition of properties to test and the apparatus to use, in evaluating the performance of buffable shoe polishes.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off