ASTM F2225-06
(Specification)Standard Safety Specification for Consumer Trampoline Enclosures
Standard Safety Specification for Consumer Trampoline Enclosures
SCOPE
1.1 This safety specification covers the components, assembly, use, labeling, and performance requirements of consumer trampoline enclosures (see Specification F 381).
1.2 This specification is applicable to trampoline enclosures to be sold as an accessory to or packaged with trampolines of (1) a minimum bed size of 3300 in.2 (2.1 m 2), (2) a minimum height of 20 in. (510 mm), (3) intended for the purpose of continuous, vertical jumping activities, and (4) intended for consumer use.
1.3 This specification includes the following sections and selected subsections:
1.4 This specification does not purport to address all of the hazards that may be associated with trampolines or trampoline enclosures, or both. The standard's existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly. Similarly, the use of a trampoline enclosure alone will not necessarily prevent all injuries.
1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 2225 – 06
Standard Safety Specification for
1
Consumer Trampoline Enclosures
This standard is issued under the fixed designation F 2225; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 2. Referenced Documents
2
1.1 This safety specification covers the components, assem- 2.1 ASTM Standards:
bly, use, labeling, and performance requirements of consumer D 2240 Test Method for Rubber Property—Durometer
trampoline enclosures (see Specification F 381). Hardness
1.2 This specification is applicable to trampoline enclosures F 381 Safety Specification for Components,Assembly, Use,
to be sold as an accessory to or packaged with trampolines of and Labeling of Consumer Trampolines
2 2
(1) a minimum bed size of 3300 in. (2.1 m ), (2) a minimum F 1077 Guide for Selection of Committee F16 Fastener
height of 20 in. (510 mm), (3) intended for the purpose of Specifications
3
continuous, vertical jumping activities, and (4) intended for 2.2 ANSI Standard:
consumer use. Z535.4 Product Safety Signs and Labels
4
1.3 This specification includes the following sections and 2.3 Federal Standards:
selected subsections: 16 CFR 1500 Hazardous Substances Act Regulations
16 CFR 1500.48 Technical Requirements for Determining a
Section
Scope 1
Sharp Point in Toys and Other Articles Intended for Use
Referenced Documents 2
by Children Under 8 Years of Age
Terminology 3
16 CFR 1500.49 Technical Requirements for Determining a
Components 4
General Requirements 5
Sharp Metal or Glass Edge in Toys and Other Articles
Performance Requirements 6
Intended for Use by Children Under 8 Years of Age
Performance Tests 6
Information Packet 7
3. Terminology
Product Marking 8
Packaging and Package Marking 9
3.1 Definitions of Terms Specific to This Standard:
1.4 This specification does not purport to address all of the 3.1.1 attachment system, n—the complete manner in which
hazards that may be associated with trampolines or trampoline certain components are connected.
enclosures, or both. The standard’s existence alone will not 3.1.2 barrier, n—an enclosing device constructed of net-
necessarily prevent injuries. Like other physical activities,
ting, fabric, or other material that is intended to prevent both
trampoline use involves the risk of injury, particularly if the inadvertent and deliberate attempts to pass through the device.
equipment is used improperly. Similarly, the use of a trampo-
3.1.3 barrier height, n—the distance from the bed surface at
line enclosure alone will not necessarily prevent all injuries. rest to the upper edge of the barrier measured at a support.
1.5 The values stated in inch-pound units are to be regarded
3.1.4 barrier system, n—an enclosing device that is in-
as the standard. The values given in parentheses are for tended to prevent both inadvertent and deliberate attempts to
information only.
pass through the device forming the enclosure suspended from
1.6 The following precautionary caveat pertains only to the or attached, or both, to enclosure support (frame).
test methods portion of this specification. This standard does
3.1.5 enclosure, n—equipment which reduces the risk of the
not purport to address all of the safety concerns, if any, user falling off the trampoline.
associated with its use. It is the responsibility of the user of this
3.1.6 enclosure support (frame) attachment system, n—the
standard to establish appropriate safety and health practices framework constructed of supportive materials from which the
and determine the applicability of regulatory limitations prior
to use.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
1
This specification is under the jurisdiction ofASTM Committee F08 on Sports the ASTM website.
3
Equipment and Facilities and is the direct responsibility of Subcommittee F08.17 on Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
Trampolines and Related Equipment. 4th Floor, New York, NY 10036.
4
Current edition approved May 1, 2006. Published May 2006. Originally Available from Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA
e1
approved in 2003. Last previous edition approved in 2003 as F 2225 – 03 . 15250–7954.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
F2225–06
FIG. 1 Requirements for Connecti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.