ASTM D4154-01(2008)

Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics

SIGNIFICANCE AND USE
Upon mutual agreement between the purchaser and the supplier, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification.
It is recognized that for purposes of fashion or aesthetics, the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier.
In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D 4154 except for the following characteristic(s).”
Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.
The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in men's and boy's beachwear and sports shirts.
1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear.
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 31-Jul-2008
• ICS: 61.020 - Clothes
• Technical Committee: D13 - Textiles
• Drafting Committee: D13.61 - Apparel

Relations

• Replaces: ASTM D4154-01 - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
• Effective Date: 01-Aug-2008
• Referred By: ASTM D4231-22 - Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts
• Effective Date: 01-Aug-2008
• Referred By: ASTM D6321/D6321M-22 - Standard Practice for the Evaluation of Machine Washable T-Shirts
• Effective Date: 01-Aug-2008

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D4154 −01(Reapproved 2008)
Standard Performance Specification for
Men’s and Boys’ Knitted and Woven Beachwear and Sports
1
Shirt Fabrics
This standard is issued under the fixed designation D4154; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D2594 Test Method for Stretch Properties of Knitted Fabrics
Having Low Power
1.1 This performance specification covers knitted and wo-
D2724 Test Methods for Bonded, Fused, and Laminated
ven fabrics comprised of any textile fiber or mixture of fibers
Apparel Fabrics
used in men’s and boy’s beachwear and sports shirts.
D2905 Practice for Statements on Number of Specimens for
3
1.2 This performance specification is not applicable to
Textiles (Withdrawn 2008)
knitted and woven fabrics used for interlining and swimwear.
D3786 Test Method for Bursting Strength of Textile
Fabrics—Diaphragm Bursting Strength Tester Method
1.3 These requirements apply to both the length and width
directions for those properties where fabric direction is perti- D3787 Test Method for Bursting Strength of Textiles—
Constant-Rate-of-Traverse (CRT) Ball Burst Test
nent.
D5034 TestMethodforBreakingStrengthandElongationof
1.4 This standard does not purport to address all of the
Textile Fabrics (Grab Test)
safety concerns, if any, associated with its use. It is the
4
2.2 AATCC Test Methods:
responsibility of the user of this standard to establish appro-
8 Colorfastness to Crocking: AATCC Crockmeter Method
priate safety and health practices and determine the applica-
15 Colorfastness to Perspiration
bility of regulatory limitations prior to use.
16 Colorfastness to Light
2. Referenced Documents 23 Colorfastness to Burnt Gas Fumes
61 Colorfastness to Washing, Domestic, and Laundering,
2
2.1 ASTM Standards:
Commercial: Accelerated
D123 Terminology Relating to Textiles
96 Dimensional Changes in Laundering of Woven and
D434 Test Method for Resistance to Slippage of Yarns in
Knitted Textiles Except Wool
Woven Fabrics Using a Standard Seam (Withdrawn
3 116 Colorfastness to Crocking: Rotary Vertical Crockmeter
2003)
Method
D1424 Test Method for Tearing Strength of Fabrics by
124 Appearance of Durable Press Fabrics After Repeated
Falling-Pendulum (Elmendorf-Type) Apparatus
Home Launderings
D2262 Test Method for Tearing Strength of Woven Fabrics
132 Colorfastness to Drycleaning
by the Tongue (Single Rip) Method (Constant-Rate-of-
135 Dimensional Changes in Automatic Home Launderings
3
Traverse Tensile Testing Machine) (Withdrawn 1995)
of Durable Press Woven of Knit Fabrics
172 Colorfastness to Non-chlorine Bleach in Home Laun-
1
This performance specification is under the jurisdiction of ASTM Committee dering
D13 on Textiles and is the direct responsibility of Subcommittee D13.61 on
188 Colorfastness to Chlorine Bleach in Home Laundering
Apparel.
Evaluation Procedure 1 Gray Scale for Color Change
Current edition approved Aug. 1, 2008. Published October 2008. Originally
Evaluation Procedure 2 Gray Scale for Staining
approved in 1982. Last previous edition approved in 2001 as D4154 – 01. DOI:
10.1520/D4154-01R08.
Evaluation Procedure 3 AATCC Chromatic Transference
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Scale
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
4
the ASTM website. AATCC Technical Manual, available from American Association of Textile
3
The last approved version of this historical standard is referenced on Chemists and Colorists (AATCC), P.O. Box 12215, Research Triangle Park, NC
www.astm.org. 27709, http://www.aatcc.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D4154−01 (2008)
TABLE 1 Specification Requirements
NOTE 1—Class for colorfastness and DP rating is based on a numerical scale of 5 for negligible or no color change, color transfer, or wrinkle to 1 for
very severe color change, color transfer, or wrinkle. The numerical rating in Table 1 or a higher numerical rating is acceptable.
Requirements
Characteristic Section
Knitted Woven
Breaking strength (load) (CRT) . 111 N (25 lbf), min 7.1
Bursting strength (load) (ball burst) 222 N (50 lbf) . 7.2
1
Yarn slippage, 6-mm ( ⁄4-in.) separation . 89 N (20 lbf), min 7.3
Tongue tear strength . 6.7 N (1.5 lbf), min 7.4
Dimensional Change:
Pressing and finishing 2 % max 1 % max, pre-finished fabrics 7.5.1
After five launderings (see 7.5.2.2 if shrinkage exceed
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:D4154–01 Designation: D 4154 – 01 (Reapproved 2008)
Standard Performance Specification for
Men’s and Boys’ Knitted and Woven Beachwear and Sports
1
Shirt Fabrics
This standard is issued under the fixed designation D 4154; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in
men’s and boy’s beachwear and sports shirts.
1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear.
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2
2.1 ASTM Standards:
D 123 Terminology Relating to Textiles
D 434 Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
D 1424 Test Method for Tear ResistanceTearing Strength of Fabrics by Falling–-Pendulum Type (Elmendorf) Apparatus
D 2262 Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse
Tensile Testing Machine)
D 2594 Test MethodsMethod for Stretch Properties of Knitted Fabrics Having Low Power
D 2724 Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
D 2905 Practice for Statements on Number of Specimens for Textiles
D 3786Test Method for Hydraulic Bursting Strength of Knitted Goods and Nonwoven Fabrics: Diaphragm Bursting Strength
Tester Method Test Method for Bursting Strength of Textile FabricsDiaphragm Bursting Strength Tester Method
D 3787 Test Method for Bursting Strength of Knitted Goods: TextilesConstant-Rate-of-Traverse (CRT) Ball Burst Test
D 5034 Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
3
2.2 AATCC Test Methods:
8 Colorfastness to Crocking: AATCC Crockmeter Method
15 Colorfastness to Perspiration
16 Colorfastness to Light
23 Colorfastness to Burnt Gas Fumes
61 Colorfastness to Washing, Domestic, and Laundering, Commercial: Accelerated
96 Dimensional Changes in Laundering of Woven and Knitted Textiles Except Wool
116 Colorfastness to Crocking: Rotary Vertical Crockmeter Method
124 Appearance of Durable Press Fabrics After Repeated Home Launderings
132 Colorfastness to Drycleaning
135 Dimensional Changes in Automatic Home Launderings of Durable Press Woven of Knit Fabrics
172 Colorfastness to Non-chlorine Bleach in Home Laundering
188 Colorfastness to Chlorine Bleach in Home Laundering
1
This specification is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.61 on Apparel.
Current edition approved May 10, 2001. Published July 2001. Originally published as D4154–82. Last previous edition D4154–95a.
1
This performance specification is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.61 on Apparel.
Current edition approved Aug. 1, 2008. Published October 2008. Originally approved in 1982. Last previous edition approved in 2001 as D 4154 – 01.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Discontinued; see 1994 Annual Book of ASTM Standards , Vol 07.01.
3
AATCC Technical Manual, available from American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Research Triangle Park, NC 27709,
http://www.aatcc.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D 4154 – 01 (2008)
Evaluation Procedure 1 Gray Scale for Color Change
Evaluation Procedure 2 Gray Scale for Staining
Evaluation Procedure 3 AATCC Chromatic Transference Scale
4
2.3 Federal Standard:
16 CFR, Chapter II—Consumer Product Safety Commission Subchapter D—Flammable
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:D4154–01 Designation: D 4154 – 01 (Reapproved 2008)
Standard Performance Specification for
Men’s and Boys’ Knitted and Woven Beachwear and Sports
1
Shirt Fabrics
This standard is issued under the fixed designation D 4154; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in
men’s and boy’s beachwear and sports shirts.
1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear.
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2
2.1 ASTM Standards:
D 123 Terminology Relating to Textiles
D 434 Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
D 1424 Test Method for Tear ResistanceTearing Strength of Fabrics by Falling–-Pendulum Type (Elmendorf) Apparatus
D 2262 Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse
Tensile Testing Machine)
D 2594 Test MethodsMethod for Stretch Properties of Knitted Fabrics Having Low Power
D 2724 Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
D 2905 Practice for Statements on Number of Specimens for Textiles
D 3786 Test Method for Hydraulic Bursting Strength of Knitted Goods and Nonwoven Fabrics: Diaphragm Bursting Strength
Tester Method Test Method for Bursting Strength of Textile FabricsDiaphragm Bursting Strength Tester Method
D 3787 Test Method for Bursting Strength of Knitted Goods: TextilesConstant-Rate-of-Traverse (CRT) Ball Burst Test
D 5034 Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
3
2.2 AATCC Test Methods:
8 Colorfastness to Crocking: AATCC Crockmeter Method
15 Colorfastness to Perspiration
16 Colorfastness to Light
23 Colorfastness to Burnt Gas Fumes
61 Colorfastness to Washing, Domestic, and Laundering, Commercial: Accelerated
96 Dimensional Changes in Laundering of Woven and Knitted Textiles Except Wool
116 Colorfastness to Crocking: Rotary Vertical Crockmeter Method
124 Appearance of Durable Press Fabrics After Repeated Home Launderings
132 Colorfastness to Drycleaning
135 Dimensional Changes in Automatic Home Launderings of Durable Press Woven of Knit Fabrics
172 Colorfastness to Non-chlorine Bleach in Home Laundering
188 Colorfastness to Chlorine Bleach in Home Laundering
1
This specification is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.61 on Apparel.
Current edition approved May 10, 2001. Published July 2001. Originally published as D4154–82. Last previous edition D4154–95a.
1
This performance specification is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.61 on Apparel.
Current edition approved Aug. 1, 2008. Published October 2008. Originally approved in 1982. Last previous edition approved in 2001 as D 4154 – 01.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Discontinued; see 1994 Annual Book of ASTM Standards, Vol 07.01.
3
AATCC Technical Manual, available from American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Research Triangle Park, NC 27709,
http://www.aatcc.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D 4154 – 01 (2008)
Evaluation Procedure 1 Gray Scale for Color Change
Evaluation Procedure 2 Gray Scale for Staining
Evaluation Procedure 3 AATCC Chromatic Transference Scale
4
2.3 Federal Standard:
16 CFR, Chapter II—Consumer Product Safety Commission Subchapter D—Flammable
...