iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F381-15

(Specification)

Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

ABSTRACT
This safety specification covers the components, the assembly, and the use of consumer trampolines. This specification is intended to reduce the demonstrated hazards associated with the use of trampolines by consumers in home environments. It is not intended to apply to institutional trampolines. Trampolines that adhere to this specification are not recommended for use by children under six years of age. When a trampoline is offered for sale, it shall include a frame, a bed, a suspension system, frame padding, information packet and suitable markings. A trampoline ladder shall not be included as a component part or within the same packaging. Roller stands shall be included for portable trampolines. Shock attenuation test shall be performed on the frame padding. However, a drop test shall be performed for trampolines without frame padding. Drop test shall be performed on the frame padding, while a survivability drop test shall be performed on the edge system if other than a frame padding. Padding attachment system test shall be performed to determine padding retention.
SCOPE
1.1 This safety specification covers the components, the assembly, and the use of consumer trampolines.  
1.2 This specification is delimited in its application to trampolines of (1) a minimum bed size of 3300 in.2  (21 300 cm2), (2) a minimum height of 20 in. (51 cm), (3) intended for the purpose of continuous, vertical jumping activities and (4) intended for consumer use.  
1.3 This specification is intended (1) to reduce the demonstrated hazards associated with the use of trampolines by consumers; (2) for trampolines used in a home environment by a single user; and (3) not to apply to institutional trampolines or trampolines intended for use on water. Trampolines that adhere to this specification are not recommended for use by children under six years of age.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the hazards associated with trampolines. The standard's existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.  
1.7 This specification includes the following sections and selected subsections.    
Title  
Section Number  
Scope  
1  
Referenced Documents  
2  
Terminology  
3  
Included Components  
4  
Materials and Manufacture  
5  
Design Requirements  
5.2  
Performance Requirements  
5.3  
Performance Requirements  
6  
Shock Attenuation  
6.1  
Drop Test  
6.2  
Drop test weight and impactor shape.  
6.2.5  
Drop test procedure.  
6.2.6  
Padding Attachment System Strength  
6.3  
Padding Attachment System Strength Test
Procedure  
6.3.1  
Drop Test for Trampoline Edge Survivability  
6.4  
Drop Test Procedure for Trampolines
Where Frame Padding Is Not Required  
6.4.1  
Crush and Shear Points  
6.5  
Ultraviolet (UV) Resistant Materials Test  
6.6  
Static Load Tests  
6.7  
Static Load Test on Trampoline Bed  
6.7.1  
Static Load Test on Trampoline Frame  
6.7.2  
Procedure for Static Load Tests  
6.7.4  
Information Packet:  
7  
Packet Marketing and Contents  
7.1  
Assembly and Installation Instructions  
7.2  
Care and Maintenance Instructions  
7.3 ...

General Information

Status
Historical
Publication Date
30-Jun-2015
ICS
97.220.30 - Indoor sports equipment
Technical Committee
F08 - Sports Equipment, Playing Surfaces, and Facilities
Drafting Committee
F08.17 - Trampolines and Related Equipment
Current Stage
Ref Project

Relations

Replaces
ASTM F381-14 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Effective Date
01-Jul-2015
Replaced By
ASTM F381-16 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Effective Date
01-Jun-2016
Referred By
ASTM F2225-15(2020) - Standard Safety Specification for Consumer Trampoline Enclosures
Effective Date
01-Jul-2015

Buy Standard

ASTM F381-15 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer TrampolinesASTM F381-15 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
PreviousNext
Technical specification
ASTM F381-15 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM F381-15 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer TrampolinesREDLINE ASTM F381-15 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
PreviousNext
Technical specification
REDLINE ASTM F381-15 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F381 −15 AnAmerican National Standard
Standard Safety Specification for
Components, Assembly, Use, and Labeling of Consumer
1
Trampolines
ThisstandardisissuedunderthefixeddesignationF381;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
Included Components 4
Materials and Manufacture 5
1.1 This safety specification covers the components, the
Design Requirements 5.2
assembly, and the use of consumer trampolines. Performance Requirements 5.3
Performance Requirements 6
1.2 This specification is delimited in its application to
Shock Attenuation 6.1
2
Drop Test 6.2
trampolines of (1) a minimum bed size of 3300 in. (21 300
2 Drop test weight and impactor shape. 6.2.5
cm ), (2) a minimum height of 20 in. (51 cm), (3) intended for
Drop test procedure. 6.2.6
the purpose of continuous, vertical jumping activities and (4)
Padding Attachment System Strength 6.3
Padding Attachment System Strength Test 6.3.1
intended for consumer use.
Procedure
1.3 This specification is intended (1) to reduce the demon- Drop Test for Trampoline Edge Survivability 6.4
Drop Test Procedure for Trampolines 6.4.1
strated hazards associated with the use of trampolines by
Where Frame Padding Is Not Required
consumers; (2) for trampolines used in a home environment by
Crush and Shear Points 6.5
a single user; and (3) not to apply to institutional trampolines Ultraviolet (UV) Resistant Materials Test 6.6
Static Load Tests 6.7
or trampolines intended for use on water. Trampolines that
Static Load Test on Trampoline Bed 6.7.1
adhere to this specification are not recommended for use by
Static Load Test on Trampoline Frame 6.7.2
Procedure for Static Load Tests 6.7.4
children under six years of age.
Information Packet: 7
1.4 The values stated in inch-pound units are to be regarded
Packet Marketing and Contents 7.1
Assembly and Installation Instructions 7.2
as standard. The values given in parentheses are mathematical
Care and Maintenance Instructions 7.3
conversions to SI units that are provided for information only
Warning Information 7.4
and are not considered standard. Use Instructions 7.5
Product Marking: 8
1.5 This standard does not purport to address all of the
Identification 8.1
hazards associated with trampolines. The standard’s existence
On-Trampoline Warnings 8.2
Instruction Sign 8.3
alone will not necessarily prevent injuries. Like other physical
Packaging and Package Marking 9
activities, trampoline use involves the risk of injury, particu-
Access Devices: 10
larly if the equipment is used improperly. Trampoline Ladders 10.1
Ladder Warning 10.2
1.6 This standard does not purport to address all of the
Keywords 11
safety concerns, if any, associated with its use. It is the
Appendix
responsibility of the user of this standard to establish appro-
2. Referenced Documents
priate safety and health practices and determine the applica-
2
bility of regulatory limitations prior to use. 2.1 ASTM Standards:
1.7 This specification includes the following sections and B117 Practice for Operating Salt Spray (Fog) Apparatus
selected subsections. D638 Test Method for Tensile Properties of Plastics
D2240 Test Method for Rubber Property—Durometer Hard-
Title Section Number
Scope 1
ness
Referenced Documents 2
F355 TestMethodforImpactAttenuationofPlayingSurface
Terminology 3
Systems and Materials
F1487 ConsumerSafetyPerformanceSpecificationforPlay-
ground Equipment for Public Use
1
This safety specification is under the jurisdiction of ASTM Committee F08 on
Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility of
2
Subcommittee F08.17 on Trampolines and Related Equipment. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved July 1, 2015. Published August 2015. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1974. Last previous edition approved in 2014 as F381 – 14. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/F0381-15. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F381−15
F2225 SafetySpecificationforConsumerTrampolineEnclo- 3.1.13 portable, adj—able to be easily moved without
sures disassembly, though usually requiring the assistance of devices
F2774 Practice for Manufacturing Quality Control of Con- such as roller stands. Folding-type trampolines are often
sumer Trampoline Bed Material intended to be portable.
3
2.2 AATCC Standard: 3.1.14 rolle
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F381 − 14 F381 − 15 An American National Standard
Standard Safety Specification for
Components, Assembly, Use, and Labeling of Consumer
1
Trampolines
This standard is issued under the fixed designation F381; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This safety specification covers the components, the assembly, and the use of consumer trampolines.
2 2
1.2 This specification is delimited in its application to trampolines of (1) a minimum bed size of 3300 in. (21 300 cm ), (2)
a minimum height of 20 in. (51 cm), (3) intended for the purpose of continuous, vertical jumping activities and (4) intended for
consumer use.
1.3 This specification is intended (1) to reduce the demonstrated hazards associated with the use of trampolines by consumers;
(2) for trampolines used in a home environment by a single user; and (3) not to apply to institutional trampolines or trampolines
intended for use on water. Trampolines that adhere to this specification are not recommended for use by children under six years
of age.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the hazards associated with trampolines. The standard’s existence alone
will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the
equipment is used improperly.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
1.7 This specification includes the following sections and selected subsections.
Title Section Number
Scope 1
Referenced Documents 2
Terminology 3
Included Components 4
Materials and Manufacture 5
Design Requirements 5.2
Performance Requirements 5.3
Performance Requirements 6
Shock Attenuation 6.1
Drop Test 6.2
Drop test weight and impactor shape. 6.2.5
Drop test procedure. 6.2.6
Padding Attachment System Strength 6.3
Padding Attachment System Strength Test 6.3.1
Procedure
Drop Test for Trampoline Edge Survivability 6.4
Drop Test Procedure for Trampolines 6.4.1
Where Frame Padding Is Not Required
Crush and Shear Points 6.5
Ultraviolet (UV) Resistant Materials Test 6.6
Static Load Tests 6.7
Static Load Test on Trampoline Bed 6.7.1
Static Load Test on Trampoline Frame 6.7.2
Procedure for Static Load Tests 6.7.4
1
This safety specification is under the jurisdiction of ASTM Committee F08 on Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility of
Subcommittee F08.17 on Trampolines and Related Equipment.
Current edition approved May 15, 2014July 1, 2015. Published June 2014August 2015. Originally approved in 1974. Last previous edition approved in 20132014 as
F381 – 13.F381 – 14. DOI: 10.1520/F0381-14.10.1520/F0381-15.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F381 − 15
Information Packet: 7
Packet Marketing and Contents 7.1
Assembly and Installation Instructions 7.2
Care and Maintenance Instructions 7.3
Warning Information 7.4
Use Instructions 7.5
Product Marking: 8
Identification 8.1
On-Trampoline Warnings 8.2
Instruction Sign 8.3
Packaging and Package Marking 9
Access Devices: 10
Trampoline Ladders 10.1
Ladder Warning 10.2
Keywords 11
Appendix
2. Referenced Documents
2
2.1 ASTM Standards:
B117 Practice for Operating Salt Spray (Fog) Apparatus
D638 Test Method for Tensile Properties of Plastics
D2240 Test Method for Rubber Property—Durometer Hardness
F355 Test Method for Impact Attenuation of Playing Surface Systems and Materials
F1487 Consumer Safety Performance Specification for Playground Equipment for Public Use
F2225 Safety Specification for Consumer Trampoline Enclosures
F2774 Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material
3
2.2 AATCC Standard:
AATCC Method 169
4
2.3 ANSI Standard:
ANSI Z535.4 Product Safety Signs and Labels
5
2.4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F1081-23(Specification)
Standard Specification for Competition Wrestling Mats

ABSTRACT
This specification establishes the physical and performance requirements for qualifying construction designs of competition wrestling mats used in U.S. collegiate or high school style (Type I), and international free style (Type II) wrestling. All mat constructions are included here, except for felt-core mats enclosed in sewn covers. The mats shall be tested and conform accordingly to tensile strength, shock absorption, and thickness requirements.
SIGNIFICANCE AND USE
5.1 The mats shall be constructed to yield the values listed in Table 1 throughout the mat area under the conditions of the manufacturer's warranty.  
5.2 Special requirements for the mats shall be subject to purchase agreements. Special requirements shall never reduce any of the basic requirements listed in this standard.  
5.3 Good manufacturing practices shall be used in the construction and inspection of the mats.
SCOPE
1.1 This specification covers competition wrestling mats used at the high school and college levels. All mat constructions are included, except felt-core mats enclosed in sewn covers. The intended use of this standard is for the qualification of construction designs.  
Note 1: The known constructions, as of the issuance of this specification are: (1) closed-cell foam cores with polyvinyl chloride (PVC) or PVC copolymer coatings, or both, which are integral parts of the mat; (2) closed-cell foam cores with attached fabric cover; (3) foam cores, either open- or closed-cell enclosed in sewn, loose covers, and (4) molded open-cell PVC foam with a dense skin on one surface which is an integral part of the mat.
Note 2: There is no known ISO equivalent to this standard.  
1.2 This specification covers mats used in the two major styles of wrestling: U.S. collegiate or high school, and international free style.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Note 6 for specific hazards statements.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F2276-23(Specification)
Standard Specification for Fitness Equipment

ABSTRACT
This specification establishes parameters for the design and manufacture of fitness equipment intended for use by individuals age 12 and above. The design and construction requirements for the following are specified: (1) stability, (2) support, (3) edges, corners, and tube ends, and (4) moving parts in accessible areas such as rotating and reciprocating points. The equipment shall meet the guarding, enclosure, and spacing requirements specified for: (1) squeeze, shear, and crush points, (2) adjustment and locking means, (3) handgrips (integral, applied, and rotating) and foot support, (4) load development and transmitting components such as ropes, belts, chains, and other means, and chain or gear drives, and (5) intrinsic, extrinsic, and endurance loading. The documentation shall include the following: assembly instructions, list of equipment parts, operational instructions, and maintenance instructions. Adequate warnings or warning labels alerting users, third parties, and service personnel to hazards associated with use and service of the equipment shall be provided for consumer, commercial, and institutional fitness equipment. The requirements for site-specific labels and user weight restrictions are specified.
SCOPE
1.1 This specification establishes parameters for the design and manufacture of fitness equipment as defined in 3.1.9.  
1.2 It is intended that these fitness products be used in an indoor setting or environment.  
1.3 It is the intent of this specification to specify products for use by individuals age 13 and above.  
1.4 This standard is to be used in conjunction with Test Methods F2571.  
1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM F1045-22(Specification)
Standard Performance Specification for Ice Hockey Helmets

SCOPE
1.1 This performance specification2 covers performance requirements for ice hockey helmets.  
1.2 The intent of this performance specification is to reduce the risk of injury to the head without compromising the form and appeal of the game.  
1.3 This performance specification covers: (1) performance tests for shock absorption properties of the complete helmet and strength and elongation of the chin strap and its attachment; and (2) requirements for area of coverage and penetration.  
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.  
1.5 The following precautionary caveat pertains only to the test methods portion, Section 12, of this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    11 pages
    English language
    sale 15% off
  • Technical specification
    11 pages
    English language
    sale 15% off
ASTM
ASTM F513-22(Specification)
Standard Specification for Eye and Face Protective Equipment for Hockey Players

SCOPE
1.1 This specification covers performance requirements and test methods for face protectors marketed, sold, and intended for ice hockey.  
1.2 The intent of this specification is to reduce the risk of injury to the face without compromising the form or appeal of the game. To do so, the face protector shall be used:  
1.2.1 As intended within the rules of the game and  
1.2.2 In accordance with the manufacturer’s instructions.  
1.3 Ice hockey is a sport with intrinsic hazards associated with the normal conduct of the game. Participation in ice hockey implies the acceptance of some risk of injury. Use of a face protector certified to this specification will not prevent all injuries.  
1.4 This specification has been prepared after careful consideration of the frequency and mechanisms associated with facial and eye injuries that can potentially occur within the rules of the game of ice hockey.  
1.5 Requirements and the corresponding test methods, where appropriate, are given for the following:  
1.5.1 Construction,  
1.5.2 Puck impact resistance,  
1.5.3 Penetration,  
1.5.4 Field of vision, and  
1.5.5 Marking and information.  
1.6 Face protection is intended for use by players, goalkeepers, and certain functionaries (for example, referees and coaches). Types of protectors considered under this specification are:  
1.6.1 Type B1—A full-face protector intended for use by persons older than ten years of age, other than goaltenders;  
1.6.2 Type B2—A full-face protector intended for use by persons ten years of age or younger, other than goaltenders; and  
1.6.3 Type C (Visor)—A visor intended for use by person in the junior age category and older, other than goaltenders.  
1.7 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.  
1.8 Use of the singular does not exclude the plural (and vice versa) when the sense allows.  
1.9 Although the intended primary application of this specification is stated in this scope, note that it remains the responsibility of the users of this specification to judge its suitability for their particular purpose.  
1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    15 pages
    English language
    sale 15% off
  • Technical specification
    15 pages
    English language
    sale 15% off
ASTM
ASTM F3104-21(Test Method)
Standard Test Methods for Evaluating Design and Performance Characteristics of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment

SIGNIFICANCE AND USE
4.1 The purpose of this document is to provide valid and repeatable test methods for the evaluation of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment assembled and maintained according to the manufacturer's specifications. Use of these test methods in conjunction with Specification F3105 is intended to maximize the reliability of the equipment’s design and reduce the risk of serious injury resulting from design deficiencies.
SCOPE
1.1 These test methods specify procedures and apparatus used for testing and evaluating Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment for compliance to Specification F3105. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies will be used and referenced.  
1.2 Requirements—This equipment is to be tested in accordance with this test method or Test Methods F2571 for all of the following parameters:  
1.2.1 Stability,  
1.2.2 Edge and corner sharpness,  
1.2.3 Tube ends,  
1.2.4 Entrapment and pinch points,  
1.2.5 Weight disc retention,  
1.2.6 Function of adjustments and locking mechanisms,  
1.2.7 Training weight post loading,  
1.2.8 Storage weight post loading,  
1.2.9 Stop height verification,  
1.2.10 Stop load drop test,  
1.2.11 Barbell hook dimensions,  
1.2.12 Catch hook load drop test,  
1.2.13 Barbell support/frame impact test,  
1.2.14 Intrinsic loading,  
1.2.15 Extrinsic loading,  
1.2.16 Endurance loading, and  
1.2.17 Documentation and warnings verification.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM F2571-15(2020)(Test Method)
Standard Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment

SIGNIFICANCE AND USE
4.1 The purpose of these tests are to provide valid and repeatable methods for the evaluation of fitness equipment assembled and maintained according to the manufacturer’s specifications. Use of these test methods in conjunction with Specification F2276 is intended to maximize the reliability of fitness equipment design and reduce the risk of serious injury resulting from design deficiencies.
SCOPE
1.1 These test methods specify procedures and apparatus used for testing and evaluating fitness equipment for compliance to Specification F2276. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies will be used and referenced.  
1.2 It is the intent of this standard to specify test methods for fitness products for use by individuals age 13 and above.  
1.3 Requirements—Fitness Equipment is to be tested for all of the following parameters:  
1.3.1 Stability.  
1.3.2 Edge and Corner Sharpness.  
1.3.3 Tube Ends and Holes.  
1.3.4 Function of Adjustments and Locking Mechanisms.  
1.3.5 Handgrip Design and Retention.  
1.3.6 Foot Supports.  
1.3.7 Load Development and Transmitting Systems.  
1.3.8 Chain and Gear Drive Design.  
1.3.9 Entrapment Zones and Guarding.  
1.3.10 Loading:
1.3.10.1 Intrinsic Loading.
1.3.10.2 Extrinsic Loading.
1.3.10.3 Handlebar Loading.
1.3.10.4 Endurance Loading.
(1) Seat frame endurance loading.  
1.3.11 Switch and switch actuation mechanism endurance.  
1.3.12 Electrical Guarding.  
1.3.13 Maximum Surface Temperature.  
1.3.14 Documentation and Warnings Verification.  
1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    9 pages
    English language
    sale 15% off
ASTM
ASTM F2811-15(2020)(Test Method)
Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers

SIGNIFICANCE AND USE
4.1 The purpose of these test methods is to provide reliable and repeatable test methods for the evaluation of elliptical trainers assembled and maintained according to the manufacturer’s specifications. Use of these test methods, in conjunction with Specification F2810, is intended to ensure appropriate performance and reliability of an elliptical trainer and reduce the risk of serious injury from design deficiencies.
SCOPE
1.1 These test methods specify procedures and equipment used for testing and evaluating elliptical trainers for compliance to Specification F2810. Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies will be used and referenced. In case of a conflict between this document and Specification F2810, Specification F2810 takes precedence.  
1.2 Requirements—An elliptical trainer is to be tested for all of the following parameters:  
1.2.1 Endurance,  
1.2.2 Static loading,
1.2.2.1 Handlebars
1.2.2.2 Foot supports  
1.2.3 Adjustable guide systems,  
1.2.4 Control panel,  
1.2.5 Warnings, and  
1.2.6 Documentation.  
1.3 This test method2 contains additional requirements to address the accessibility of the equipment for persons with disabilities.  
1.4 The values stated in SI units are to be regarded as the standard. The values in parenthesis are for information only.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1250-20(Specification)
Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers

ABSTRACT
This safety specification provides the safety design features and reasonable safety standards intended to reduce the demonstrated hazards associated with the use (including storage, movement, entry, use, and exit from the product) of stationary exercise bicycles assembled in accordance with the manufacturer's instructions for safe use. This standard is limited to exercise bicycles of the following classes: Class A, non-free-wheeling exercise bicycles with a directly driven flywheel; Class B, free-wheeling exercise bicycles; Class C, ergometer bicycles or those bicycles used to precisely measure work; and Class D, units designed to convert road bicycles to stationary exercise bicycles. Device stability, exterior design, overheating performance, inertia, and design characteristics of the individual parts such as the frame and seat post retention assembly, seat post and seat, handlebars, and pedals shall be tested as indicated herein, and should comply accordingly with the acceptance criteria specified for each the said requirements. Guidelines are also specified for appropriate documentation practices for the owner's/user's manual, assembly instructions, operational instructions, maintenance instructions, installation instructions, user weight restrictions, warnings/warning labels, and other product markings.
SCOPE
1.1 This standard establishes parameters for the design and manufacture of stationary upright and recumbent exercise bicycles and ergometers as defined in Section 3.  
1.2 It is the intent of this standard to specify fitness products for use only by an individual age 13 and older.  
1.3 This standard is to be used in conjunction with Specification F2276 and Test Methods F3023.  
1.4 This specification is intended to reduce the demonstrated hazards associated with the use of stationary exercise upright and recumbent bicycles and ergometers.  
1.5 This specification is written to provide reasonable safety standards for the user of stationary upright and recumbent exercise bicycles and ergometers during storage, movement, entry, use and exit from the product.  
1.6 This standard does not apply to mechanisms that convert road bicycles into indoor stationary bicycles.  
1.7 This specification2 establishes additional requirements not set forth in the referenced ASTM standards for the design of commercial fitness equipment to increase access and user independence by people with functional limitations or impairments.  
1.8 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    10 pages
    English language
    sale 15% off
  • Technical specification
    10 pages
    English language
    sale 15% off
ASTM
ASTM F3105-20(Specification)
Standard Specification for Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment

ABSTRACT
This specification outlines parameters for the proper design and manufacture of externally loaded strength training equipment, strength training benches and external weight storage equipment. It aims to assist designers and manufacturers in reducing the possibility of injury when the products are used in accordance with the operational instructions. The fitness products are intended for use in an indoor setting or environment, and only by an individual age 13 and older.
The equipment types covered by this specification are: externally loaded strength training equipment, work arm actuated (type 1); externally loaded strength training equipment, linear slide actuated (type 2); strength training benches, designed for use with a barbell (type 3); strength training benches, designed for independent use or for use with optional equipment (type 4); external weight storage equipment, any device with the sole purpose to store external weights (type 5); multi-function systems, a machine whose function incorporates more than one station or operation intended for separate exercises (type 6); rack stations (type 7).
SCOPE
1.1 This specification establishes parameters for the design and manufacture of externally loaded strength training equipment, strength training benches and external weight storage equipment as defined in 3.1.  
1.2 It is intended that these fitness products be used in an indoor setting or environment.  
1.3 It is the intent of this standard to specify fitness products for use only by an individual age 13 and older.  
1.4 This standard is to be used in conjunction with Specification F2276, Test Methods F2571, and Test Methods F3104.  
1.5 This standard takes precedence over Specification F2276 and Test Methods F2571 in areas that are specific to Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment.  
1.6 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    9 pages
    English language
    sale 15% off
  • Technical specification
    9 pages
    English language
    sale 15% off
ASTM
ASTM F2810-15(2020)(Specification)
Standard Specification for Elliptical Trainers

ABSTRACT
This specification establishes parameters for the design and manufacture of elliptical training equipment for use in an indoor environment or setting. It specifies fitness products for use only by an individual age 13 or older and is to be used in conjunction with Specification F2276 and Test Methods F2811. The goal of this specification is to promote proper design and manufacturing practices for elliptical training equipment so that the possibility of injury can be minimized when these products are used in accordance with the operational instructions. Equipment types covered by this specification are elliptical trainer with fixed handlebars (Type 1), elliptical trainer with moveable handlebars (Type 2), and elliptical trainer with moveable and fixed handlebars (Type 3). Design and construction requirements are for foot support (foot support loading), handlebars (handlebar loading), endurance, and adjustable guide systems.
SCOPE
1.1 This specification establishes parameters for the design and manufacture of elliptical training equipment as defined in 3.1 for use in an indoor environment or setting.  
1.2 It is the intent of this standard to specify fitness products for use only by an individual age 13 or older.  
1.3 This standard is to be used in conjunction with Specification F2276 and Test Methods F2811. All specifications in this standard supersede those of Specification F2276 where applicable.  
1.4 This specification2 established additional requirements not set forth in the referenced ASTM standards for the design of commercial fitness equipment to increase access and user independence by people with functional limitations or impairments.  
1.5 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off