ASTM C1277-06
(Specification)Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ABSTRACT
This specification covers the materials and testing of shield hubless couplings to join hubless cast iron soil pipe and fittings. Gaskets shall comply with the required physical and chemical properties, dimensions, and material specifications. The rubber gasket shall conform to the required physical requirements such as tensile strength, elongation, durometer, accelerated aging, compression set, oil immersion, ozone cracking, tear resistance, and water absorption. The shield and clamp assembly shall be made of material conforming to the requirements such as tensile strength and hardness. All parts shall be made of 300 series stainless steel, namely: Type 301; Type 304; Type 300; Type 301; and Type 305. The material shall also undergo physical tests like deflection, shear, and unstrained hydrostatic tests.
SCOPE
1.1 This specification covers the materials and testing of shielded hubless couplings to join hubless cast iron soil pipe and fittings.
1.2 Several different types of hubless couplings are available for use in hubless cast iron sanitary and storm drain, waste and vent piping applications to connect hubless cast iron soil pipe and fittings by using a sleeve-type, or some other type coupling device. It is the purpose of this specification to furnish information as to the characteristics of one such sleeve type couplings when applied to cast iron soil pipe and fittings manufactured in accordance with Specification A 888, latest revision, and CISPI-301, latest revision.
1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.
1.4 The committee with jurisdiction over this standard is aware of other comparable standard published by the Cast Iron Soil Pipe Institute, CISPI-310, FM 1680 published by Factory Mutual, and Specification C 1540 published by ASTM.
The following precautionary caveat pertains only to the test method portion, Section , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C 1277 – 06
Standard Specification for
Shielded Couplings Joining Hubless Cast Iron Soil Pipe and
1
Fittings
This standard is issued under the fixed designation C 1277; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope Fittings for Sanitary and Storm Drain, Waste, and Vent
Piping Applications
1.1 This specification covers the materials and testing of
C 564 Specification for Rubber Gaskets for Cast Iron Soil
shielded hubless couplings to join hubless cast iron soil pipe
Pipe and Fittings
and fittings.
C 717 Terminology of Building Seals and Sealants
1.2 Several different types of hubless couplings are avail-
C 1540 Specification for Heavy Duty Shielded Couplings
able for use in hubless cast iron sanitary and storm drain, waste
Joining Hubless Cast Iron Soil Pipe and Fittings
and vent piping applications to connect hubless cast iron soil
2.2 CISPI Standard:
pipe and fittings by using a sleeve-type, or some other type
CISPI-301 SpecificationforHublessCastIronSoilPipeand
couplingdevice.Itisthepurposeofthisspecificationtofurnish
Fittings for Sanitary and Storm Drain, Waste and Vent
information as to the characteristics of one such sleeve type
3
Piping Applications
couplings when applied to cast iron soil pipe and fittings
CISPI-310 Specification for Couplings for Use in Connec-
manufactured in accordance with Specification A 888, latest
tion with Hubless Cast Iron Soil Pipe and Fittings for
revision, and CISPI-301, latest revision.
Sanitary and Storm Drain, Waste, and Vent Piping Appli-
1.3 The values stated in inch-pound units are to be regarded
3
cations
as the standard. The SI units given in parentheses are for
FM 1680 Couplings Used in Hubless Cast Iron Systems for
information only.
Drain, Waste or Vent, Sewer, Rainwater or Storm Water
1.4 The committee with jurisdiction over this standard is
System,Above or Below Ground, Industrial, Commercial
aware of other comparable standard published by the Cast Iron
4
and Residential
Soil Pipe Institute, CISPI-310, FM 1680 published by Factory
Mutual, and Specification C 1540 published by ASTM.
3. Terminology
1.5 The following precautionary caveat pertains only to the
3.1 Definitions:
test method portion, Section 7, of this specification. This
3.1.1 Definitions of the following terms used in this speci-
standard does not purport to address all of the safety concerns,
fication are found in Terminology C 717, Paragraph 4.1:
if any, associated with its use. It is the responsibility of the user
elastomeric, durometer and dynamic.
of this standard to establish appropriate safety and health
3.2 Definitions of Terms Specific to This Standard:
practices and determine the applicability of regulatory limita-
3.2.1 center stop, n—an integral part of the gasket centered
tions prior to use.
on the axial length of the gasket intended to limit the insertion
2. Referenced Documents depth of the pipe to be coupled.
2 3.2.2 clamp assembly, n—that portion of the coupling
2.1 ASTM Standards:
excluding the gasket and shield.
A 888 Specification for Hubless Cast Iron Soil Pipe and
3.2.3 corrugated, n—any method of embossing.
3.2.4 coupling, n—the complete assembly.
3.2.5 fitting, n—parts of a pipeline other than straight pipes,
1
This specification is under the jurisdiction of ASTM Committee A04 on Iron
valves, or couplings.
Castings and is the direct responsibility of Subcommittee A04.75 on Gaskets and
3.2.6 gasket, n—the elastomeric portion of the coupling.
Couplings for Plumbing and Sewer Piping.
Current edition approved June 1, 2006. Published June 2006. Originally
approved in 1994. Last previous edition approved in 2004 as C 1277 – 04.
2 3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Available from Cast Iron Soil Pipe Institute, 5959 Shallowford Rd., Suite 419,
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Chattanooga, TN 37421.
4
Standards volume information, refer to the standard’s Document Summary page on Available from Factory Mutual Research, 1151 Boston-Providence Turnpike,
the ASTM website. Norwood, MA, 02062.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
C1277–06
3.2.7 joint, n—the point of assembly consisting of the 4. Materials and Manufacture
coupling and the joined pipes or fittings, or both.
4.1 Physical properties of gaskets shall comply with Speci-
3.2.8 shield, n—an external metallic protective device de- fication C 564 and the dimensions, material specifications,
signed to protect
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.