ASTM A1025-02
(Specification)Standard Specification for Ferroalloys, General Requirements
Standard Specification for Ferroalloys, General Requirements
SCOPE
1.1 This specification covers a group of common requirements that, unless otherwise specified in an individual specification, shall apply to ferroalloys and other charge materials under each of the following ASTM specifications:Title of SpecificationASTM DesignationFerromanganeseA 99FerrosiliconA 100FerrochromiumA 101FerrovanadiumA 102FerromolybdenumA 132Molybdenum oxide productsA 146FerroboronA 323FerrotitaniumA 324Chromium metalA 481Ferrochrome-siliconA 482SilicomanganeseA 483Calcium-silicon alloysA 495FerrocolumbiumA 550Electrolytic manganese metalA 601Nickel oxide sinterA 636Ferromanganese siliconA 701Titanium scrap for use in deoxidation and alloying of steelA 845Aluminum scrap for use in deoxidation and alloying of steelA 846Silicon metalA 922
1.2 This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated therein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.
1.3 In case of conflict between the requirements of the individual specification and this general specification, the former shall prevail.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn. Contact ASTM
International (www.astm.org) for the latest information.
Designation: A 1025 – 02
Standard Specification for
Ferroalloys, General Requirements
This standard is issued under the fixed designation A 1025; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope A 100 Specification for Ferrosilicon
A 101 Specification for Ferrochromium
1.1 This specification covers a group of common require-
A 102 Specification for Ferrovanadium
ments that, unless otherwise specified in an individual speci-
A 132 Specification for Ferromolybdenum
fication, shall apply to ferroalloys and other charge materials
A 146 Specification for Molybdenum Oxide Products
under each of the following ASTM specifications:
A 323 Specification for Ferroboron
Title of Specification ASTM Designation
A 324 Specification for Ferrotitanium
Ferromanganese A99
Ferrosilicon A 100
A 481 Specification for Chromium Metal
Ferrochromium A 101
A 482 Specification for Ferrochrome-Silicon
Ferrovanadium A 102
A 483 Specification for Silicomanganese
Ferromolybdenum A 132
Molybdenum oxide products A 146
A 495 Specification for Calcium-Silicon Alloys
Ferroboron A 323
A 550 Specification for Ferrocolumbium
Ferrotitanium A 324
Chromium metal A 481 A 601 Specification for Electrolytic Manganese Metal
Ferrochrome-silicon A 482
A 610 Test Methods for Sampling and Testing Ferroalloys
Silicomanganese A 483
for Determination of Size
Calcium-silicon alloys A 495
A 636 Specification for Nickel Oxide Sinter
Ferrocolumbium A 550
Electrolytic manganese metal A 601
A 701 Specification for Ferromanganese-Silicon
Nickel oxide sinter A 636
A 845 Specification for Titanium Scrap for Use in Deoxi-
Ferromanganese silicon A 701
Titanium scrap for use in deoxidation and alloying of steel A 845 dation and Alloying of Steel
Aluminum scrap for use in deoxidation and alloying of steel A 846
A 846 Specification forAluminum Scrap for Use in Deoxi-
Silicon metal A 922
dation and Alloying of Steel
1.2 This specification also covers a group of supplementary
A 922 Specification for Silicon Metal
requirements which may be applied to the above specifications
E29 Practice for Using Significant Digits in Test Data to
as indicated therein. These are provided for use when addi-
Determine Conformance with Specifications
tional testing or inspection is desired and apply only when
E32 Practices for Sampling Ferroalloys and SteelAdditives
specified individually by the purchaser in the order.
for Determination of Chemical Composition
1.3 In case of conflict between the requirements of the
3. Ordering Information
individual specification and this general specification, the
former shall prevail.
3.1 Orders for material should include the following as
1.4 This standard does not purport to address all of the required, to describe the material adequately:
safety concerns, if any, associated with its use. It is the
3.1.1 ASTM designation and year of issue,
responsibility of the user of this standard to establish appro-
3.1.2 Grade of material,
priate safety and health practices and determine the applica-
3.1.3 Size of material,
bility of regulatory requirements prior to use.
3.1.4 Quantity,
3.1.5 Packaging requirements, and
2. Referenced Documents
3.1.6 Supplementary requirements desired, including the
2.1 ASTM Standards:
standards of acceptance.
A99 Specification for Ferromanganese
This specification is under the jurisdiction of ASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
A01.18 on Castings.
Current edition approved September 10, 2002. Published October 2002. Annual Book of ASTM Standards, Vol 14.02.
2 4
Annual Book of ASTM Standards, Vol 01.02. Annual Book of ASTM Standards, Vol 03.05.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn. Contact ASTM
International (www.astm.org) for the latest information.
A1025–02
4. Chemical Analysis the purchaser that the material is being furnished in accordance
with the material specification.
4.1 The chemical analysis method shall be agreed upon by
the purchaser and supplier.
7. Rejection
4.2 The manufacturer shall furnish a certificate referencing
7.1 Any rejections based on tests made in accordance with
the chemical analysis and appropriate supplementary require-
the material specification shall be reported to the manufacturer
ments in the material specification.
within 45 days from receipt of material by the purchaser.
4.3 For purposes of determining conformance with this
specification, the reported analysis shall be rounded to the 8. Certification
nearest unit in the last right-hand place of figures, used in
8.1 The manufacturer’s certification shall be furnished to
expressing the limiting value, in accordance with the rounding
the purchaser at the time of shipment stating that the material
method of PracticeE29.
was manufactured, sampled, tested, and inspected in accor-
dancewiththematerialspecificationandwasfoundtomeetthe
5. Sampling
requirements.
5.1 Unless otherwise specified, the material shall be
9. Packaging and Package Marking
sampled for determination of chemical composition in accor-
9.1 Each lot/shipment shall be identified with appropriate
dance with Practices E32 and for determination of size in
identification showing the material, theASTM designation, the
accordance with Test Methods A 610.
size, the lot number, and name brand or trademark.
5.2 In the case of a discrepancy, Practices E32 or Test
9.2 When the shipment is made in containers, each shall be
M
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.