ASTM E1975-01

Standard Specification for Shelter, Electrical, Equipment S-280/G

SCOPE
1.1 This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, and ship, as Shelter, Electrical Equipment S-280/G (see 15.5).
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 The following safety hazards caveat refers only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 09-Oct-2001
• ICS: 55.180.40 - Complete, filled transport packages
• Technical Committee: E06 - Performance of Buildings
• Drafting Committee: E06.53 - Materials and Processes for Durable Rigidwall Relocatable Structures

Relations

• Replaces: ASTM E1975-98 - Standard Specification for Shelter, Electrical, Equipment S-280/G
• Effective Date: 10-Oct-2001
• Replaced By: ASTM E1975-01e1 - Standard Specification for Shelter, Electrical, Equipment S-280/G
• Effective Date: 10-Oct-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: E 1975 – 01
Standard Specification for
1
Shelter, Electrical, Equipment S-280/G
This standard is issued under the fixed designation E 1975; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope Sandwich Panels (200°F Elevated Humidity Service), Type
5
II Panels
1.1 This specification covers one type of lightweight field
E 1801 Practice for Adhesive Bonding of Aluminum Fac-
and mobile shelter designed for transport by cargo truck, fixed
5
ings in Foam and Beam Type Shelters
or rotary winged aircraft, by rail, and ship, as Shelter, Electrical
E 1851 Test Method for Electromagnetic Shielding Effec-
Equipment S-280/G (see 15.5).
5
tiveness of Durable Rigid Wall Relocatable Structures
1.2 The values stated in inch-pound units are to be regarded
E 1925 Specification for Engineering and Design Criteria
as the standard. The values given in parentheses are for
5
for Rigid Wall Relocatable Structures
information only.
2.2 Federal Air Regulation (FAR):
1.3 The following safety hazards caveat refers only to the
6
FAR 25.853 Compartment Interior
test methods described in this specification. This standard does
2.3 Military Standards:
not purport to address the safety concerns, if any, associated
MIL-W-6858 Welding Resistance: Aluminum, Magnesium,
with its use. It is the responsibility of the user of the standard
Non-Hardening Steels or Alloys, Nickel Alloys, Nickel
to establish appropriate safety and health practices and
Alloys, Heat-Resisting Alloys and Titanium Alloys; Spot
determine the applicability of regulatory limitations prior to
7
and Seam
use.
7
MIL-M-13231 Marking of Electronic Items
7
2. Referenced Documents MIL-F-14072 Finishes for Ground Electronic Equipment
MIL-DTL-55507 Shelter, Electrical Equipment, (With or
2.1 ASTM Standards:
7
Without Equipment), Packaging of
C 272 Test Method for Water Absorption of Core Materials
2
MIL-STD-105 Sampling Procedures and Tables for Inspec-
for Structural Sandwich Constructions
7
tion by Attributes
C 273 Test Method for Shear in Flatwise Plane of Flat
2
MIL-STD-202 Test Methods for Electronic and Electrical
Sandwich Constructions or Sandwich Cores
7
Component Parts
D 1621 Test Method for Compressive Strength of Rigid
3
MIL-STD-252 Classification of Visual and Mechanical De-
Cellular Plastics
fects for Equipment, Electronic, Wired, and Other De-
D 1622 Test Method for Apparent Density of Rigid Cellular
7
3
vices
Plastics
MIL-STD-810 Environmental Engineering Considerations
D 2842 Test Method for Water Absorption of Rigid Cellular
7
4
and Laboratory Tests
Plastics
MIL-STD-1235 Single and Multilevel Continuous Sam-
E 864 Practice for Preparation of Aluminum Alloys to be
7
5
pling Procedures and Tables for Inspection by Attributes
Adhesively Bonded in Honeycomb Shelter Panels
MIL-STD-1595 Qualification of Aircraft, Missile and Aero-
E 1730 Specification for Rigid Foam for Use in Shelter
7
5
space Fusion Welders
Sandwich Panel Cores
2.4 Drawings:
E 1749 Terminology Relating to Rigid Wall Relocatable
8
5
SC-D-36423 Hold Down Assembly
Shelters
8
SC-C-36424 Cable Assembly
E 1773 Practice for Sealing Rigid Wall Tactical Shelters
8
5
SC-C-200154 Keeper
with Polysulfide Based Sealants
8
SM-D-450462 Panel Assembly, Emergency Exit
E 1794 Specification for Adhesive for Bonding Foam Cored
8
SM-C-450466 Air Filter
8
SM-C-555515 Shock Mount
1
This specification is under the jurisdiction of ASTM Committee E06 on
Performance of Buildings and is the direct responsibility of Subcommittee E06.53
on Materials and Processes for Durable Rigid Wall Relocatable Structures.
6
Current edition approved April 10, 2001. Published May 2001. Originally Available from Flight Standards Service, Federal Aviation Administration, 800
published as E 1975–98. Last previous edition E 1975–98. Independence Ave., SW, Washington, DC 20591.
2 7
Annual Book of ASTM Standards, Vol 15.03. Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700
3
Annual Book of ASTM Standards, Vol 08.01. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
4 8
Annual Book of ASTM Standards, Vol 08.02. Available from U.S. Army Natick Research, Development, and Engineering
5
Annual Book of ASTM Standards, Vol 04.11. Center, Attn: SSCNC-WST, Natick, MA 01760-5018.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E 1975
8
SM-B-563756 Sealer 3.1.4 testing—testing consists of determinations of compli-
8
ance, using technical means.
SC-D-595509 Cover, Emergency Exit
8
SC-B-595564 Core Material-Urethane, L
...