iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM C963-00(2021)

(Specification)

Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

ABSTRACT
This specification covers the packaging, identification and marking, shipment, and storage of lock-strip gaskets, and gasket assemblies and components that are used in building walls.
SIGNIFICANCE AND USE
3.1 This specification can be referred to in contract documents as a method and workmanship standard. See also related Specification C542, Specification C716, Terminology C717, and Guide C964.
SCOPE
1.1 This specification covers the packaging, identification, shipment, and storage of lock-strip gaskets and components that comply with Specification C542 and that are used in building walls that are not more than 15° from a vertical plane.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Published
Publication Date
30-Apr-2021
ICS
55.180.40 - Complete, filled transport packages
Technical Committee
C24 - Building Seals and Sealants
Drafting Committee
C24.73 - Compression Seal and Lock Strip Gaskets
Current Stage
Ref Project

Relations

Refers
ASTM C716-06(2020) - Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
Effective Date
01-Jan-2020
Refers
ASTM C964-19 - Standard Guide for Lock-Strip Gasket Glazing
Effective Date
01-Aug-2019
Refers
ASTM C717-19 - Standard Terminology of Building Seals and Sealants
Effective Date
01-Mar-2019
Refers
ASTM C717-18 - Standard Terminology of Building Seals and Sealants
Effective Date
01-Mar-2018
Refers
ASTM C717-17a - Standard Terminology of Building Seals and Sealants
Effective Date
01-Nov-2017
Refers
ASTM C542-05(2017) - Standard Specification for Lock-Strip Gaskets
Effective Date
01-Jun-2017
Refers
ASTM C717-17 - Standard Terminology of Building Seals and Sealants
Effective Date
01-Jan-2017
Refers
ASTM C717-16a - Standard Terminology of Building Seals and Sealants
Effective Date
15-Nov-2016
Refers
ASTM C717-16 - Standard Terminology of Building Seals and Sealants
Effective Date
01-Sep-2016
Refers
ASTM C716-06(2015) - Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
Effective Date
01-Dec-2015
Refers
ASTM C717-14a - Standard Terminology of Building Seals and Sealants
Effective Date
01-May-2014
Refers
ASTM C717-14 - Standard Terminology of Building Seals and Sealants
Effective Date
01-Feb-2014
Refers
ASTM C717-13 - Standard Terminology of Building Seals and Sealants
Effective Date
01-Nov-2013
Refers
ASTM C964-07(2012) - Standard Guide for Lock-Strip Gasket Glazing
Effective Date
01-Dec-2012
Refers
ASTM C717-12b - Standard Terminology of Building Seals and Sealants
Effective Date
01-Dec-2012

Buy Standard

ASTM C963-00(2021) - Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip GasketsASTM C963-00(2021) - Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
PreviousNext
Technical specification
ASTM C963-00(2021) - Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: C963 −00 (Reapproved 2021)
Standard Specification for
Packaging, Identification, Shipment, and Storage of Lock-
Strip Gaskets
This standard is issued under the fixed designation C963; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 4. Packaging, Identification, Shipment, and Storage
1.1 This specification covers the packaging, identification, 4.1 Packaging—Gaskets, gasket assemblies, and compo-
shipment, and storage of lock-strip gaskets and components nents shall be properly packaged to avoid cutting, abrading,
that comply with Specification C542 and that are used in permanently distorting, or otherwise damaging them during
building walls that are not more than 15° from a vertical plane. shipping and storage. Each container shall be legibly and
indelibly marked with the manufacturer’s name and address,
1.2 This international standard was developed in accor-
the project name, the part or assembly number for the gaskets,
dance with internationally recognized principles on standard-
the quantity of parts in each container, and other identification
ization established in the Decision on Principles for the
required by the purchaser.
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
4.2 Identification and Marking—Each gasket, gasket
Barriers to Trade (TBT) Committee.
assembly, or component shall be clearly and legibly labeled
with the manufacturer’s identifying part number and other
2. Referenced Documents
identification required by the purchaser.
2.1 ASTM Standards:
4.3 Shipment—Gaskets, gasket assemblies, and components
C542 Specification for Lock-Strip Gaskets
shall be shipped in closed containers using the best commercial
C716 Specification for Installing Lock-Strip Gaskets and
practices as defined by the Interstate Commerce Commission
Infill Glazing Materials
Manual,“UniformFreightClassificationNumber9.” Contain-
C717 Terminology of Building Seals and Sealants
ers shall not be handled in a manner that will cause damage to
C964 Guide for Lock-Strip Gasket Glazing
the contents.
4.4 Storage—Gaskets, gasket assemblies, and components,
3. Significance and Use
shall be stored in original containers in a clean dry area, free of
3.1 This specification can be referred to in contract docu-
dust, debris, oils, solvents, welding slag, spatter
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM C1565-23(Test Method)
Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements

SIGNIFICANCE AND USE
5.1 This method is intended to help manufacturers determine the relative pack-set tendency of their cement(s). The test establishes a pack-set index which, when properly correlated with field performance, is useful in predicting or preventing field unloading difficulties.  
5.2 The test is an aid to routine control during cement production and is not suitable for specification purposes.  
5.3 In general, field performance of cement flowability is satisfactory when the pack-set index as determined on freshly ground cement averages 0 to 15 and is unsatisfactory when the index exceeds 25. Any prediction of field performance of cement flowability measuring 16 to 25 is tenable. These are general ranges and the field performance of individual cements may not necessarily fall within these ranges. Additional conditions, after the cement has left the control of the manufacturing facility, can affect the apparent pack set index as well.  
5.4 Any attempt to apply the critical range of pack-set index numbers based on freshly ground cement to job cement without special treatment of the sample would be problematic. The test is a “GO-NO-GO” type of test and should not be used for specification purposes.  
5.5 The pack-set index of field cement can be evaluated in terms of the pack-set index ranges of that cement as determined when freshly-ground. This comparison can aid the manufacturer in producing cement that offers the best field performance for pack-set properties.  
5.6 Silo storage of cement may result in a greater amount of consolidation than this method is designed to induce, and the resulting forces required to overcome that consolidation are not measured by this test method.  
5.7 Pack set is not to be confused with “warehouse set” which results from surface hydration of the cement from adsorbed moisture.
SCOPE
1.1 This test method covers the determination of the pack-set index, which provides an indication of the mechanical force needed to overcome the consolidation of portland and blended hydraulic cements.  
1.2 The pack-set index number provides a numerical value useful for manufacturers who desire to measure and control the effect that vibration-induced consolidation has upon the manufactured cement.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Values stated in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the rules of Conversion and rounding given in Standard IEEE/ASTM SI 10, of measurements made in other units.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (WARNING—Fresh hydraulic-cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM B660-23(Practice)
Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

ABSTRACT
These practices describe methods of packaging/packing aluminum and magnesium products, in preparation for storage or shipment, both foreign and domestic. These practices are designed to deliver the products to their destination in good condition. Aluminum and magnesium products must be preserved and packed so as to be adequately protected from possible damage during shipment and storage. Major damage type are: mechanical and corrosion or water stain. These practices are classified according to levels of protection: Level A and commercial packaging.
SCOPE
1.1 These practices describe methods of packaging/packing aluminum and magnesium products, in preparation for storage or shipment, both foreign and domestic. Assuming proper and normal handling in transit, these practices are designed to deliver the products to their destination in good condition. For DOD redistribution, see Supplementary Requirements.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 Aluminum and magnesium products must be preserved and packed so as to be adequately protected from possible damage during shipment and storage. Major damage types are:  
1.3.1 Mechanical, including bending, crushing, denting, scratching, or gouging during handling and storage; and abrasions resulting from vibration during transport of the material.  
1.3.2 Corrosion, or water stain, resulting from exposure of packed material to water, either externally applied, or as condensate caused by temperature variations in a humid atmosphere.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 15% off
ASTM
ASTM E921-97(2022)(Specification)
Standard Specification for Export Packaged Laboratory Apparatus

ABSTRACT
This specification covers the requirements, acceptable criteria, and testing procedures for examining loaded shipping containers. Drop, vibration, and compression tests shall be performed to measure the ability of the shipping container to protect the product from shock, vibration, and compression forces encountered during normal export handling and shipping conditions. This specification is not intended to supplant material specifications or existing preshipment test procedures, and is not intended for use with hazardous materials as well.
SCOPE
1.1 This specification covers the procedures for testing loaded shipping containers. Drop, vibration and compression tests are performed to measure the ability of the shipping container to protect the product from shock, vibration and compressive forces encountered during normal export handling and shipping conditions. This specification is not intended to supplant material specifications or existing preshipment test procedures. This specification is not intended for use with hazardous materials.  
1.2 These procedures are suitable for all types of laboratory apparatus, including reusable and disposable macro and micro products.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 The following precautionary caveat pertains only to the test method portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F2338-09(2020)(Test Method)
Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

SIGNIFICANCE AND USE
5.1 Leaks in medical device, pharmaceutical, and food packages may result in the ingress of unwanted gases (most commonly oxygen), harmful microbiological, or particulate contaminants. Package leaks may appear as imperfections in the package components themselves or at the seal juncture between mated components. The ability to detect leaks is necessary to ensure consistency and integrity of packages.  
5.2 After initial set-up and calibration, individual test operation may be semi-automatic, automatic, or manual. The test method permits non-destructive detection of leaks not visibly detectable. The test method does not require the introduction of any extraneous materials or substances, such as dyes or gases. However, it is important to physically mask or block off any package porous barrier surface during the test to prevent rapid loss of chamber vacuum resulting primarily from gas migration through the porous surface. Leak detection is based solely on the ability to detect the change in pressure inside the test chamber resulting from gas or vapor egress from a package challenged with vacuum.  
5.3 This test is a useful research tool for optimizing package sealing parameters and for comparatively evaluating various packages and materials. This test method is also applicable to production settings as it is rapid, non-invasive, and non-destructive, making it useful for either 100 % on-line testing or to perform tests on a statistical sampling from the production operation.  
5.4 Leak test results that exceed the permissible limits for the vacuum decay test are indicated by audible or visual signal responses, or both.
SCOPE
1.1 Test Packages—Packages that can be nondestructively evaluated by this test method include:  
1.1.1 Rigid and semi-rigid non-lidded trays.  
1.1.2 Trays or cups sealed with porous barrier lidding material.  
1.1.3 Rigid, nonporous packages.  
1.1.4 Flexible, nonporous packages.  
1.2 Leaks Detected—This test method detects package leaks by measuring the rise in pressure (vacuum loss) in an enclosed evacuated test chamber containing the test package. Vacuum loss results from leakage of test package headspace gases and/or volatilization of test package liquid contents located in or near the leak. When testing for leaks that may be partially or completely plugged with the package’s liquid contents, the test chamber is evacuated to a pressure below the liquid’s vaporization pressure. All methods require a test chamber to contain the test package and a leak detection system designed with one or more pressure transducers. Test method sensitivities cited below were determined using specific product-package systems selected for the precision and bias studies summarized in Table 1. Table 1 also lists other examples of relevant product-package systems that can be tested for leakage by vacuum decay.    
1.2.1 Trays or Cups (Non-lidded) (Air Leakage)—Hole or crack defects in the wall of the tray/cup of at least 50 μm in diameter can be detected. Nonlidded trays were tested at a Target Vacuum of –4·E4 Pa (–400 mbar).  
1.2.2 Trays Sealed with Porous Barrier Lidding Material (Headspace Gas Leakage)—Hole or crack defects in the wall of the tray/cup of at least 100 μm in diameter can be detected. Channel defects in the seal area (made using wires of 125 μm in diameter) can be detected. Severe seal bonding defects in both continuous adhesive and dot matrix adhesive package systems can be detected. Slightly incomplete dot matrix adhesive bonding defects can also be detected. All porous barrier lidding material packages were tested at a Target Vacuum of –4·E4 Pa (–400 mbar). The sensitivity of the test for porous lidded packages is approximately E-2 Pa·m3·s-1 using a calibrated volumetric airflow meter.  
1.2.3 Rigid, Nonporous Packages (Headspace Gas Leakage)—Hole defects of at least 5 μm in diameter can be detected. Plastic bottles with screw caps were tested at a target vacuum...

  • Standard
    13 pages
    English language
    sale 15% off
ASTM
ASTM D642-20(Test Method)
Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads

SIGNIFICANCE AND USE
4.1 Compressive resistance is one of the properties used to evaluate the ability of shipping containers, components, and unit loads to successfully survive the compressive forces they are subjected to during storage and distribution (see Note 1).
Note 1: For constant load test refer to Test Method D4577.  
4.2 Compressive resistance may be determined with either fixed- or swiveled-platen-type testing machines. However, a fixed-head compression machine is required to perform edge-to-edge and corner-to-corner orientations on test specimens (see Note 2). Also, unit loads are generally tested only in the top-to-bottom orientation.
Note 2: Fixed-platen machines generally cause corrugated box specimens to fail at their strongest point, while swivel-platen machines cause corrugated box specimens to fail at their weakest point.5 The swiveled platen is allowed to move to the weakest point of the container.
SCOPE
1.1 This test method covers compression tests on shipping containers (for example, boxes and drums) or components, or both. Shipping containers may be tested with or without contents. The procedure may be used for measuring the ability of the container to resist external compressive loads applied to its faces, to diagonally opposite edges, or to corners. This test method covers testing of multiple containers or unit loads, in addition to individual shipping containers, components, materials, or combination thereof.  
1.2 The test method of applying load may be used to compare the characteristics of a given design of container with a standard, or to compare the characteristics of containers differing in construction.  
1.3 This test method is related to TAPPI T 804. This test method fulfills the requirements of International Organization for Standardization (ISO) Test Method 12048. The ISO standards may not meet the requirements for this test method.  
1.4 The test may be conducted with the container loaded with contents and interior packaging in cases where the contents share the load.  
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1140/F1140M-13(2020)e1(Test Method)
Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages

SIGNIFICANCE AND USE
5.1 These test methods provide a rapid means of evaluating tendencies for package failure when the package is exposed to a pressure differential. Pressure differentials may occur during processes such as sterilization and transportation.  
5.2 These test methods are frequently used to quickly evaluate packages during the manufacturing process and at various stages of the package's life cycle.  
5.3 If correlations between pieces of test equipment are to be made, it is important that all parameters of the test method be exactly the same. Typical parameters may include, but are not limited to, package size, material, seal configuration, test equipment, rate of air flow into the package, sensitivity (machine response to pressure drop), and position of test article (see Fig. 1).
FIG. 1 Open Package Test Positions  
5.4 These test methods do not necessarily provide correlation with actual package seal strength as typically measured using Test Method F88 (or equivalent).
SCOPE
1.1 These test methods explain the procedure for determining the ability of packages to withstand internal pressurization.  
1.2 The burst test increasingly pressurizes the package until the package fails.  
1.3 The creep test maintains a specified pressure for a specified time or until the package fails.  
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM A700-14(2019)(Guide)
Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment

ABSTRACT
These practices cover the packaging, marking, and loading of steel products for shipment, and are intended to deliver the products to their destination in good condition. It is also intended that these recommendations be used as guides for attaining uniformity, simplicity, adequacy, and economy in the shipment of steel products. These practices cover semi-finished steel products, bars, bar-size shapes and sheet pilings, rods, wire and wire products, tubular products, plates, sheets, and strips, tin mill products, and castings.
SCOPE
1.1 This guide covers the packaging, marking, and loading of steel products for shipment. Assuming proper handling in transit, this guide is intended to assist shippers in packaging and loading steel products to arrive at their destination safely and in good condition. It is also intended that this guide may be used for attaining uniformity, simplicity, sufficiency, and economy in the shipment of steel products.  
1.2 This guide applies to semi-finished steel products, bars, structural shapes and sheet piling, rods, wire and wire products, tubular products, plates, sheets, and strips, tin mill products, and castings.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    5 pages
    English language
    sale 15% off
ASTM
ASTM E1974-19(Specification)
Standard Specification for Shelter, Electrical Equipment S-250/G

ABSTRACT
This specification establishes the requirements and the corresponding test methods for one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, and ship, designated as electric equipment shelter S-250/G. These requirements include those for the material, construction, environmental performance, structural integrity, and tightness characteristics.
SCOPE
1.1 This specification covers one type of lightweight field and mobile rigid wall shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, and ship, designated as Shelter, Electrical Equipment S-250/G.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following safety hazards caveat refers only to the test methods portion of this specification. This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    18 pages
    English language
    sale 15% off
  • Technical specification
    18 pages
    English language
    sale 15% off
ASTM
ASTM E920-97(2019)(Specification)
Standard Specification for Commercially Packaged Laboratory Apparatus

ABSTRACT
This specification covers the procedures for testing loaded shipping containers. Drop and vibration tests are performed to measure the ability of the shipping container to protect the product from the shock and vibration the container receives during normal handling and transporting. This specification is not intended for use with hazardous materials. The procedures are suitable for all types of laboratory apparatus, including reusable and disposable macro and micro products.
SCOPE
1.1 This specification covers the procedures for testing loaded shipping containers. Drop and vibration tests are performed to measure the ability of the shipping container to protect the product from the shock and vibration the container receives during normal handling and transporting. This specification is not intended to supplant material specifications or existing preshipment test procedures. This specification is not intended for use with hazardous materials.  
1.2 These procedures are suitable for all types of laboratory apparatus, including reusable and disposable macro and micro products.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 The following precautionary caveat pertains only to the test method portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D7386-16(Practice)
Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

SIGNIFICANCE AND USE
4.1 This practice provides a guide for the evaluation of shipping units in accordance with a uniform system, using established test methods at levels representative of those occurring in actual distribution. The recommended test levels are based on available information on the shipping and handling environment, and current industry/government practice and experience. The tests should be performed sequentially on the same containers in the order given. For use as a performance test, this practice requires that the shipping unit tested remain unopened until the sequence of tests are completed. If used for other purposes, such as package development, it may be useful to open and inspect shipping units at various times throughout the sequence. This may, however, prohibit evaluating the influence of the container closure on container performance.
SCOPE
1.1 This practice provides a uniform basis of evaluating, in a laboratory, the ability of shipping units, weighing up to but not exceeding 150 lb (68 kg), intended for the single parcel delivery system to withstand the hazards associated with the distribution environment. This is accomplished by subjecting them to a test plan consisting of a sequence of anticipated hazard elements encountered in the distribution cycles. This practice is not intended to supplant material specifications or existing pre-shipment test procedures.  
1.2 The suitability of this practice for use with hazardous materials has not been determined.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 1.1.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 15% off