ASTM D4297-05(2009)
(Practice)Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)
Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)
SIGNIFICANCE AND USE
This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program and consultation with an appropriate MSDS. The information provided herein cannot be used as a substitute for expert safety and medical advice as provided in an appropriate MSDS, but rather as a supplement to such advice.
SCOPE
1.1 This practice covers procedures for safely sampling and handling 4,4′-isopropylidinediphenol, commercially known as bisphenol A (BPA), in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves product quality.
1.2 Any person sampling or handling this product should have consulted a Material Safety Data Sheet (MSDS) for specific first aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information.
Designation:D4297–05(Reapproved2009)
Standard Practice for
Sampling and Handling Bisphenol A
(4,4* -Isopropylidinediphenol)
This standard is issued under the fixed designation D4297; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* an existing health and safety program and consultation with an
appropriate MSDS. The information provided herein cannot be
1.1 This practice covers procedures for safely sampling and
used as a substitute for expert safety and medical advice as
handling 4,48-isopropylidinediphenol, commercially known as
provided in an appropriate MSDS, but rather as a supplement
bisphenol A (BPA), in various solid forms, and as a liquid at
to such advice.
elevated temperatures in a manner which represents and
preserves product quality.
4. Description of Product (See Table 1)
1.2 Any person sampling or handling this product should
4.1 Bisphenol A (BPA) is not classified as a hazardous
have consulted a Material Safety Data Sheet (MSDS) for
chemicalbytheDepartmentofTransportation,andis,therefore
specific first aid instructions and information on the proper
not subject to DOT regulations governing the transportation of
equipment to have available for use in the event of personal
hazardous articles. Bisphenol A is normally transported in
contact or exposure.
severaltypesofcontainersincludingclothandpaperbags,bulk
1.3 The values stated in inch-pound units are to be regarded
trucks, and covered hopper cars. (See Table 1.)
as standard. The values given in parentheses are mathematical
4.2 While bisphenol A (BPA) is dangerous when handled
conversions to SI units that are provided for information only
improperly, particularly at elevated temperatures, its unloading
and are not considered standard.
need not be hazardous provided the hazards are recognized and
1.4 This standard does not purport to address all of the
handling instructions are rigidly observed as detailed here and
safety concerns, if any, associated with its use. It is the
in an appropriate MSDS.
responsibility of the user of this standard to establish appro-
priate safety and health practices and determine the applica-
5. Hazards
bility of regulatory limitations prior to use. For specific hazard
5.1 Health—Consult current OSHA regulations and suppli-
statements, see Section 8.
er’s Material Safety Data Sheets for all materials used in this
practice.
2. Referenced Documents
5.1.1 Aside from the risk of thermal burns in handling BPA
2.1 OSHA Regulations:
2 when molten, and a possibility of dermatitis from impurities,
29 CFR Labor, paragraphs 1910.1000 and 1910.1200
particularly in crude grades, industrial use does not present a
2.2 U.S. DOT Regulations:
2 significant health hazard. However, ordinary precautions must
49 CFR Transportation, Subchapter C, Parts 171-180
be observed to protect personnel from contact with molten
3. Significance and Use BPA or excessive exposure to dusts or high concentrations of
vapor.
3.1 This practice is issued to provide information useful in
5.1.2 Precautions must be observed to protect personnel
establishing sampling and handling procedures. It is expected
from excessive inhalation of vapors and dust.
that this information will only be utilized in conjunction with
5.2 Fire:
5.2.1 BPA in both the solid and liquid form is combustible
This practice is under the jurisdiction of ASTM Committee D16 on Aromatic
and introduces a potential fire hazard when it is stored,
Hydrocarbons and Related Chemicals and is the direct responsibility of Subcom-
handled, or used.
mittee D16.08 on Handling and Sampling Aromatic and Cyclic Hydrocarbons.
5.2.2 BPA vapors or dust can form explosive mixtures with
Current edition approved June 1, 2009. Published June 2009. Originally
approved in 1983. Last previous edition approved in 2005 as D4297 – 05. DOI:
air.
10.1520/D4297-05R09.
5.2.3 Dry chemicals, carbon dioxide, foam, and water can
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
all be used in fighting fires involving BPA.
Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://
www.dodssp.daps.mil.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
D4297–05 (2009)
TABLE 1 Typical Physical Properties Product Bisphenol A
Boiling Point, °C Flash Point, Specific Gravity,
Melting Point, °C Solid Forms
(10.5 mm Hg) °F 25°C
154–157 240 prills, flakes, crystals, powder 4.5 1.20 (solid)
6. Protective Equipment 10. Sampling Solid Bisphenol A
6.1 Employees who work with BPA should be well trained
10.1 Bulk Quantities—Take a representative sample, pref-
and should maintain safe working conditions. They should be
erably from a falling BPA stream, using a strai
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:D4297–99 Designation: D 4297 – 05 (Reapproved 2009)
Standard Practice for
Sampling and Handling Bisphenol A
(4,4* -Isopropylidinediphenol)
This standard is issued under the fixed designation D 4297; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1This practice covers procedures for safely sampling and handling 4,48-isopropylidinediphenol, commercially known as
bisphenol A, in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves product
quality.
1.2Any person sampling or handling this product should have specific first aid instructions and equipment available for use in
the event of personal contact or exposure.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use. For specific hazard statements, see Sections 4-8 and 9Scope*
1.1 This practice covers procedures for safely sampling and handling 4,48-isopropylidinediphenol, commercially known as
bisphenol A (BPA), in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves
product quality.
1.2 Any person sampling or handling this product should have consulted a Material Safety Data Sheet (MSDS) for specific first
aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use. For specific hazard statements, see Section 8.
2. Referenced Documents
2.1 OSHA Regulations:
29CFR Labor, paragraphs 1910.1000 and 1910.1200
29 CFR Labor, paragraphs 1910.1000 and 1910.1200
2.2 U.S. DOT Regulations:
49CFR Transportation, Subchapter C, Parts 171-180
49 CFR Transportation, Subchapter C, Parts 171-180
3. Significance and Use
3.1 This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that
this information will only be utilized in conjunction with an existing health and safety program and consultation with an
appropriate MSDS. The information provided herein cannot be used as a substitute for expert safety and medical advice as
provided in an appropriate MSDS, but rather as a supplement to such advice.
4. Description of Product (See Table 1)
4.1 Bisphenol A (BPA) is not classified as a hazardous chemical by the Department of Transportation, and is, therefore not
subject to DOTregulations governing the transportation of hazardous articles. BisphenolAis normally transported in several types
of containers including cloth and paper bags, bulk trucks, and covered hopper cars. (See Table 1.)
This practice is under the jurisdiction of ASTM Committee D16 on Aromatic Hydrocarbons and Related Chemicals and is the direct responsibility of Subcommittee
D16.OJD16.08 on Handling and Sampling Aromatic and Cyclic Hydrocarbons.
´1
Current edition approved June 10, 1999. Published August 1999. Originally published as D4297–83. Last previous edition D4297–89 (1994) .
Current edition approved June 1, 2009. Published June 2009. Originally approved in 1983. Last previous edition approved in 2005 as D 4297 – 05.
Available from Superintendent of Documents, Government Printing Office, Washington, DC 20402.
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
D 4297 – 05 (2009)
TABLE 1 Typical Physical Properties Product Bisphenol A
Boiling Point, °C Flash Point, Specific Gravity,
Melting Point, °C Solid Forms
(10.5 mm Hg) °F 25°C
154–157 240 prills, flakes, crystals, powder 4.5 1.20 (solid)
4.2 While bisphenol A (BPA) is dangerous when handled improperly, particularly at elevated temperatures, its unloading need
not be hazardous provided the hazards are recognized and handling instructions are rigidly observed as detailed here and in an
appropriate MSDS.
5. Hazards
5.1 Health—ConsultcurrentOSHAregulationsandsupplier’sMaterialSafetyDataSheetsforallmaterialsusedinthispractice.
5.1.1 Aside from the risk of thermal burns in handling bisphenol A BPA when molten, and a possibility of dermatitis from
impurities, particularly in crude grades, industrial use does not present a significant health hazard. However, ordinary precautions
must be observed to protect personnel from contact with molten bisphenol ABPA or excessive exposure to dusts or high
concentrations of vapor.
5.1.2 Precautions must be observed to protect personnel from excessive inhalation of vapors and dust.
5.2 Fire:
5.2.1Bisphenol A in both the solid and liquid form is combustible and introduces a potential fire hazard when it is stored,
handled, or used.
5.2.2Bisphenol A vapors or dust can form explosive mixtures with air.
5.2.3Dry chemicals, carbon dioxide, foam, and water can all be used in fighting fires involving bisphenol A.
5.3For chemical emergency (spill, leak, fire, exposure, or accident) call CHEMTREC, day or night at 1-800-424-9300. For
emergency calls outside the United States, call 703–527–3887. (Collect calls are accepted and all calls are recorded.)
5.2.1 BPA in both the solid and liquid form is combustible and introduces a potential fire hazard when it is stored, handled, or
used.
5.2.2 BPA vapors or dust can form explosive mixtures with air.
5.2.3 Dry chemicals, carbon dioxide, foam, and water can all be used in fighting fires involving BPA.
6. Protective Equipment
6.1EmployeeswhoworkwithbisphenolAshouldbewelltrainedandshouldmaintainsafeworkingconditions.Personshandling
molten bisphenol-A require eye, face, respiratory, body, skin, and hand protection. Handling solid bisphenol A requires hand and
body covering clothing to prevent excessive exposure to dust, safety glasses with side shields, and respiratory protection such as
a dust mask.
6.2Personal protective equipment is not an adequate substitute for good safe working conditions, proper ventilation, and
intelligent conduct. Correct usage of protective equipment requires education in its proper use.
6.1 Employees who work with BPA should be well trained and should maintain safe working conditions. They should be
required to read an appropriate MSDS for BPA in it’s entirety and consult appropriate, local, safety personnel if they have any
questions or concerns. Persons handling molten bisphenol-A need to exercise particular care.
7. First Aid
7.1Skin contact with molten bisphenol A causes third degree burns. In case of skin contact with molten bisphenol
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.