ASTM D4297-15(2020)
(Practice)Standard Practice for Sampling and Handling Bisphenol A(4,4′ -Isopropylidinediphenol)
Standard Practice for Sampling and Handling Bisphenol A<brk/>(4,4<emph type="ital" >′</emph> -Isopropylidinediphenol)
SIGNIFICANCE AND USE
3.1 This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program and consultation with an appropriate SDS. The information provided herein cannot be used as a substitute for expert safety and medical advice as provided in an appropriate SDS, but rather as a supplement to such advice.
SCOPE
1.1 This practice covers procedures for safely sampling and handling 4,4′-isopropylidinediphenol, commercially known as bisphenol A (BPA), in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves product quality.
1.2 Any person sampling or handling this product should have consulted a safety Data Sheet (SDS) for specific first aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 3, 4, 5, 6, 7 and 8 and an appropriate SDS.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D4297 − 15 (Reapproved 2020)
Standard Practice for
Sampling and Handling Bisphenol A
(4,4' -Isopropylidinediphenol)
This standard is issued under the fixed designation D4297; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3. Significance and Use
1.1 This practice covers procedures for safely sampling and 3.1 This practice is issued to provide information useful in
handling 4,4'-isopropylidinediphenol, commercially known as establishing sampling and handling procedures. It is expected
bisphenol A (BPA), in various solid forms, and as a liquid at that this information will only be utilized in conjunction with
elevated temperatures in a manner which represents and an existing health and safety program and consultation with an
preserves product quality. appropriate SDS. The information provided herein cannot be
used as a substitute for expert safety and medical advice as
1.2 Any person sampling or handling this product should
provided in an appropriate SDS, but rather as a supplement to
have consulted a safety Data Sheet (SDS) for specific first aid
such advice.
instructions and information on the proper equipment to have
available for use in the event of personal contact or exposure.
4. Description of Product (See Table 1)
1.3 The values stated in SI units are to be regarded as
4.1 Bisphenol A (BPA) is not classified as a hazardous
standard. No other units of measurement are included in this
chemical by the Department of Transportation, and is,
standard.
therefore, not subject to DOT regulations governing the trans-
1.4 This standard does not purport to address all of the portation of hazardous articles. Bisphenol A is normally
safety concerns, if any, associated with its use. It is the transported in several types of containers including cloth and
responsibility of the user of this standard to establish appro- paper bags, bulk trucks, and covered hopper cars. (See Table
1.)
priate safety, health, and environmental practices and deter-
mine the applicability of regulatory limitations prior to use.
4.2 While bisphenol A (BPA) is dangerous when handled
For specific hazard statements, see Sections 3, 4, 5, 6, 7 and 8
improperly, particularly at elevated temperatures, its unloading
and an appropriate SDS.
need not be hazardous provided the hazards are recognized and
1.5 This international standard was developed in accor-
handling instructions are rigidly observed as detailed here and
dance with internationally recognized principles on standard-
in an appropriate SDS.
ization established in the Decision on Principles for the
5. Hazards
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
5.1 Health—Consult current OSHA regulations and suppli-
Barriers to Trade (TBT) Committee.
er’s Safety Data Sheet for all materials used in this practice.
5.1.1 Aside from the risk of thermal burns in handling BPA
2. Referenced Documents
when molten, and a possibility of dermatitis from impurities,
2.1 OSHA Regulations:
particularly in crude grades, industrial use does not present a
29 CFR Labor, paragraphs 1910.1000 and 1910.1200
significant health hazard. However, ordinary precautions must
2.2 U.S. DOT Regulations:
be observed to protect personnel from contact with molten
49 CFR Transportation, Subchapter C, Parts 171-180
BPA or excessive exposure to dusts or high concentrations of
vapor.
5.1.2 Precautions must be observed to protect personnel
This practice is under the jurisdiction of ASTM Committee D16 on Aromatic,
from excessive inhalation of vapors and dust.
Industrial, Specialty and Related Chemicals and is the direct responsibility of
Subcommittee D16.08 on Handling and Sampling Aromatic and Cyclic Hydrocar-
5.2 Fire:
bons.
5.2.1 BPA in both the solid and liquid form is combustible
Current edition approved Jan. 1, 2020. Published January 2020. Originally
approved in 1983. Last previous edition approved in 2015 as D4297 – 15. DOI:
and introduces a potential fire hazard when it is stored,
10.1520/D4297-15R20.
handled, or used.
Available from U.S. Government Printing Office, Superintendent of
5.2.2 BPA vapors or dust can form explosive mixtures with
Documents, 732 N. Capitol St., NW, Washington, DC 20401-0001, http://
www.access.gpo.gov. air.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
D4297 − 15 (2020)
TABLE 1 Typical Physical Properties Product Bisphenol A
Boiling Point, °C Flash Point, Specific Gravity,
Melting Point, °C Solid Forms
(10.5 mm Hg) °C 25°C
154–157 240 prills, flakes, crystals, powder 207.2 1.20 (solid)
5.2.3 Dry chemicals, carbon dioxide, foam, and water can 9.2 Opening of the hopper car dome cover and attachment
all be used in fighting fires involvi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.