ASTM F1077-05

Standard Guide for Selection of Committee F16 Fastener Specifications (Withdrawn 2014)

ABSTRACT
This guide is intended to provide a rapid, easy to use method for identifying Committee F16 fastener specifications and their applicable marking requirements. Selection is made by product type (bolts, nuts, washers, etc.) and material (alloy steel, carbon steel, stainless steel, etc.). Table size limitations and the need for simplicity prohibit identifying the exact grade, type, condition, etc., for all product/material combinations. The product specification must be reviewed prior to specifying fasteners on drawings or ordering to properly and completely identify the fastener, and its available variations.
SCOPE
1.1 This guide is intended to provide a rapid, easy to use method for identifying Committee F16 fastener specifications and their applicable marking requirements. Selection is made by product type (bolts, nuts, washers, etc.) and material (alloy steel, carbon steel, stainless steel, etc.) from as follows:
1.2 Table size limitations and the need for simplicity prohibit identifying the exact grade, type, condition, etc., for all product/material combinations. The product specification must be reviewed prior to specifying fasteners on drawings or ordering to properly and completely identify the fastener, and its available variations.
WITHDRAWN RATIONALE
This guide is intended to provide a rapid, easy to use method for identifying Committee F16 fastener specifications and their applicable marking requirements.
Formerly under the jurisdiction of Committee F16 on Fasteners, this guide was withdrawn in January 2014 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2004
• Withdrawal Date: 13-Jan-2014
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: F16 - Fasteners
• Drafting Committee: F16.91 - Editorial

Relations

• Replaces: ASTM F1077-95a(2002) - Standard Guide for Selection of Committee F16 Fastener Specifications
• Effective Date: 01-Jan-2005
• Referred By: ASTM F1918-21 - Standard Safety Performance Specification for Soft Contained Play Equipment
• Effective Date: 01-Jan-2005
• Referred By: ASTM F2225-15(2020) - Standard Safety Specification for Consumer Trampoline Enclosures
• Effective Date: 01-Jan-2005
• Referred By: ASTM F2373-11(2017) - Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
• Effective Date: 01-Jan-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F1077 −05
StandardGuide for
1
Selection of Committee F16 Fastener Specifications
This standard is issued under the fixed designation F1077; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* A354 Specification for Quenched and TemperedAlloy Steel
Bolts, Studs, and Other Externally Threaded Fasteners
1.1 This guide is intended to provide a rapid, easy to use
A394 Specification for Steel Transmission Tower Bolts,
method for identifying Committee F16 fastener specifications
Zinc-Coated and Bare
and their applicable marking requirements. Selection is made
A449 Specification for Hex Cap Screws, Bolts and Studs,
by product type (bolts, nuts, washers, etc.) and material (alloy
Steel, Heat Treated, 120/105/90 ksi Minimum Tensile
steel, carbon steel, stainless steel, etc.) from Tables 1-7 as
Strength, General Use
follows:
A489 Specification for Carbon Steel Lifting Eyes
Table Number
A490 Specification for Structural Bolts, Alloy Steel, Heat
Inch Metric
Treated, 150 ksi Minimum Tensile Strength
Ferrous Metals
Alloy Steel 1 3 A490M Specification for High-Strength Steel Bolts, Classes
3
Carbon Steel 1 3
10.9 and 10.9.3, for Structural Steel Joints (Metric)
Weathering Steel 1 3
A502 Specification for Rivets, Steel, Structural
Non Ferrous
Aluminum, Copper 23 A563 Specification for Carbon and Alloy Steel Nuts
Nickel, Titanium
A563M Specification for Carbon andAlloy Steel Nuts (Met-
Stainless Steels 2 3
ric)
Others
Coatings 4 4
A574 Specification forAlloy Steel Socket-Head Cap Screws
Quality Provisions and Test Methods 5 5
A574M Specification for Alloy Steel Socket-Head Cap
Terminology 6 6
Screws (Metric)
1.2 Table size limitations and the need for simplicity pro-
C514 Specification for Nails for the Application of Gypsum
hibit identifying the exact grade, type, condition, etc., for all
Board
product/material combinations. The product specification must
F432 Specification for Roof and Rock Bolts andAccessories
be reviewed prior to specifying fasteners on drawings or
F436 Specification for Hardened Steel Washers
ordering to properly and completely identify the fastener, and
F436M Specification for Hardened Steel Washers (Metric)
its available variations.
F467 Specification for Nonferrous Nuts for General Use
F467M Specification for Nonferrous Nuts for General Use
2. Referenced Documents
(Metric)
2
2.1 ASTM Standards:
F468 Specification for Nonferrous Bolts, Hex Cap Screws,
A31 Specification for Steel Rivets and Bars for Rivets,
and Studs for General Use
Pressure Vessels
F468M SpecificationforNonferrousBolts,HexCapScrews,
A307 Specification for Carbon Steel Bolts and Studs, 60 000
and Studs for General Use (Metric)
PSI Tensile Strength
F541 Specification for Alloy Steel Eyebolts
A325 Specification for Structural Bolts, Steel, Heat Treated,
F547 Terminology of Nails for Use with Wood and Wood-
120/105 ksi Minimum Tensile Strength
Base Materials
A325M Specification for Structural Bolts, Steel, Heat
F568M Specification for Carbon and Alloy Steel Externally
4
Treated 830 MPa Minimum Tensile Strength (Metric)
Threaded Metric Fasteners (Metric) (Withdrawn 2012)
F592 Terminology of Collated and Cohered Fasteners and
1
This guide is under the jurisdiction ofASTM Committee F16 on Fasteners and Their Application Tools
is the direct responsibility of Subcommittee F16.91 on Editorial.
F593 Specification for Stainless Steel Bolts, Hex Cap
Current edition approved Jan. 1, 2005. Published January 2005. Originally
Screws, and Studs
approved in 1987. Last previous edition approved in 2002 as F1077 – 95a (2002).
DOI: 10.1520/F1077-05.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
3
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Withdrawn.
4
Standards volume information, refer to the standard’s Document Summary page on The last approved version of this historical standard is referenced on
the ASTM website. www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1077−05
TABLE 1 Alloy, Carbon, and Weathering Steels, Inch
Carbon Steel
Weathering
A
Product Alloy Steel
Steels
Low Medium
B
Bolts :
Anchor F1554 Grade 105 F1554 Grade 36 F1554 Grade 55
Eye F541 A489
General purpose:
UTS 60K A307 Gr A, B
UTS 120, 105, 90K A449 Type 1
UTS 125, 115K A354 Gr BC
UTS 150, 140K A354 Gr BD
Roof and Rock F432
Structural:
C
UTS 120, 105K A325 Type 1 A325 Type 3
UTS 150K A490 Type 1 A490 Type 3
Tension Control,
...