ASTM E1825-06
(Guide)Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
SCOPE
1.1 This guide covers guidance to design professionals in the evaluation of materials, products, or systems with which they are not familiar and to help determine that the selected materials, products, or systems are suitable for use on or as a part of an exterior building wall.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:E1825–06
Standard Guide for
Evaluation of Exterior Building Wall Materials, Products, and
1
Systems
This standard is issued under the fixed designation E1825; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope materials, products, or systems in relation to the proposed use
on or as part of an exterior building wall.
1.1 This guide covers guidance to design professionals in
4.3 The procedures outlined in Section 5 will help guide the
the evaluation of materials, products, or systems with which
user in making informed selections based on the materials,
they are not familiar and to help determine that the selected
products, or systems performance history on constructed proj-
materials, products, or systems are suitable for use on or as a
ects and provide information on limitations of use, the manu-
part of an exterior building wall.
facturer’s performance history, and current status. The use of
1.2 This standard does not purport to address all of the
this guide will reduce, but not eliminate, the risk of in-service
safety concerns, if any, associated with its use. It is the
performance problems with materials, products, or systems.
responsibility of the user of this standard to establish appro-
4.4 The procedures listed in this standard are intended for
priate safety and health practices and determine the applica-
use in selecting materials, products, or systems that are critical
bility of regulatory limitations prior to use.
to the safety, function, or serviceability of a building, or where
2. Referenced Documents
they constitute substantial components of the work. The
2
recommendations in this guide are not applicable to all
2.1 ASTM Standards:
materials, products, or systems that can be incorporated in
E631 Terminology of Building Constructions
buildings. The user must exercise appropriate judgment and
3. Terminology
care regarding the need when applying the various procedures
included in this guide, including the use of the form included
3.1 There are no terms in this standard that require defini-
in Appendix X1, with regard to particular materials, products,
tion other than as provided by Terminology E631.
or systems, and specific buildings. Materials, products, or
4. Significance and Use
systems that will be used for a noncritical or incidental use
usually do not require an exhaustive evaluation. Materials,
4.1 This guide may be used by design professionals and
products, or systems with which the user has first-hand
others in the building construction industry to provide factual
experience do not generally require an exhaustive evaluation
support for professional judgment of materials, products, or
since many of the evaluation tasks listed herein should have
systems during the design development of new and remedial
been performed previously.
exterior building wall construction.
4.5 Appendix X1 is provided for the user of this guide as a
4.2 This guide is intended to provide guidance to the user of
tool in organizing their thoughts and approach to application of
this standard in the evaluation and qualification of materials,
the guide. It may also provide useful documentation to the user
products, or systems with which they do not have substantial,
for both the building under current consideration and as a
long-term experience or that are intended to be employed in a
future reference for other buildings. Other forms of documen-
new or different manner. The standard may be used to
tation may be developed by contract agreements or require-
investigate and assess the probable performance of such
ments of authorities having jurisdiction.
1
NOTE 1—Often components of exterior building wall construction are
This guide is under the jurisdiction of ASTM Committee E06 on Performance
tested in the laboratory to help assure adequate performance. Laboratory
of Buildings and is the direct responsibility of Subcommittee E06.55 on Exterior
Building Wall Systems. evaluationofmaterials,products,orsystemsisnotdescribedinthisguide.
Current edition approved Dec. 1, 2006. Published December 2006. Originally
approved in 1996. Last previous edition approved in 2003 as E1825 – 96 (2003).
5. Investigation
DOI: 10.1520/E1825-06.
2 5.1 Technical information from sellers, manufacturers, or
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
distributors.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, W
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.