ASTM A392-06

Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

SCOPE
1.1 This specification covers zinc-coated steel chain-link fence fabric, zinc coated either before or after weaving.
1.2 The values stated in inch-pound units are to be regarded as the standard.

General Information

• Status: Historical
• Publication Date: 14-Oct-2006
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: F14 - Fences
• Drafting Committee: F14.40 - Chain Link Fence and Wire Accessories

Relations

• Replaces: ASTM A392-03 - Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
• Effective Date: 15-Oct-2006
• Replaced By: ASTM A392-07 - Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
• Effective Date: 01-Jul-2007
• Referred By: ASTM F2814-09(2015) - Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
• Effective Date: 15-Oct-2006
• Referred By: ASTM F2611-15 - Standard Guide for Design and Construction of Chain Link Security Fencing
• Effective Date: 15-Oct-2006
• Referred By: ASTM F2409-10(2016) - Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
• Effective Date: 15-Oct-2006
• Referred By: ASTM F969-11(2016) - Standard Practice for Construction of Chain-Link Tennis Court Fence
• Effective Date: 15-Oct-2006
• Referred By: ASTM F2699-08(2018) - Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
• Effective Date: 15-Oct-2006
• Referred By: ASTM F2698-08(2018) - Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
• Effective Date: 15-Oct-2006
• Referred By: ASTM F3558-22 - Standard Guide for Chain-Link Pickleball Court Fences
• Effective Date: 15-Oct-2006
• Referred By: ASTM F2049-11(2017) - Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
• Effective Date: 15-Oct-2006
• Referred By: ASTM F2000-19 - Standard Safety Performance Specification for Fences for Baseball and Softball Fields
• Effective Date: 15-Oct-2006
• Referred By: ASTM F1908-08(2018) - Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
• Effective Date: 15-Oct-2006
• Referred By: ASTM F3000/F3000M-13(2022) - Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
• Effective Date: 15-Oct-2006
• Referred By: ASTM F1553-11(2022) - Standard Guide for Specifying Chain Link Fence
• Effective Date: 15-Oct-2006
• Referred By: ASTM E2942-22 - Standard Guide for Security of Tank Farm Installations for Compliance with Spill Prevention, Control and Countermeasure Plan (SPCC) Regulations
• Effective Date: 15-Oct-2006

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: A 392 – 06
Standard Specification for
1
Zinc-Coated Steel Chain-Link Fence Fabric
This standard is issued under the fixed designation A 392; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 3.1.2 diamond count—the number of diamond openings
from one edge of the fabric to the other. The diamond count of
1.1 This specification covers zinc-coated steel chain-link
a given fabric shall begin at the first completed diamond at one
fence fabric, zinc coated either before or after weaving.
1
edge and continue to the unfinished ( ⁄2) or full opening at the
1.2 The values stated in inch-pound units are to be regarded
other edge.
as the standard.
3.1.3 knuckling—the type of selvage obtained by interlock-
2. Referenced Documents
ing adjacent pairs of wire ends and then bending the wire ends
2
back into a loop. The loop shall be closed or nearly closed to
2.1 ASTM Standards:
a measurement less than the diameter of the wire.
A 90/A 90M Test Method for Weight [Mass] of Coating on
3.1.4 twisting—the type of selvage obtained by twisting
Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
1
adjacent pairs of wire ends together in a close helix of 1 ⁄2
A 370 Test Methods and Definitions for MechanicalTesting
machine turns, which is equivalent to 3 full twists, and cutting
of Steel Products
the wire ends at an angle. The wire ends beyond the twist shall
A 700 Practices for Packaging, Marking, and Loading
1
beatleast ⁄4in.[6.4mm]long.Thistypeofselvageisnotused
Methods for Steel Products for Shipment
on fabric with a mesh size of less than 2 in. [50.8 mm].
A 817 Specification for Metallic-Coated Steel Wire for
Chain-Link Fence Fabric and Marcelled Tension Wire
4. Ordering Information
B6 Specification for Zinc
4.1 Orders for chain-link fence fabric purchased to this
2.2 Federal Standard:
3
specification shall include the following information:
Fed. Std. No. 123 Marking for Shipments (CivilAgencies)
4.1.1 Quantity (Section 14),
2.3 Military Standards:
3
4.1.2 Zinc coated after weaving or before weaving (Section
MIL-STD-129 Marking for Shipment and Storage
5),
MIL-STD 163 Steel Mill Products, Preparation for Ship-
3
4.1.3 Size of mesh (Section 7),
ment and Storage
4.1.4 Size of wire (Section 8),
3. Terminology
4.1.5 Height of fabric (Section 9),
4.1.6 Diamond count, if specified (Section 6),
3.1 Definitions of Terms Specific to This Standard:
4.1.7 Type of selvage (Section 10),
3.1.1 chain-link fence fabric—afencingmaterialmadefrom
4.1.8 Class of coating (Section 11),
steel wire helically wound and interwoven in such a manner as
4.1.9 ASTM designation and year of issue, and
to provide a continuous mesh without knots or ties except in
4.1.10 Certification if required (Section 17).
the form of knuckling or of twisting the ends of the wires to
4.2 All rolls of fencing accepted by the purchaser shall be
formtheselvageofthefabric.Variationstoknuckledortwisted
billed on the basis of the original footage of the rolls before
selvages are permissible.
sampling, unless changed by contractual arrangement.
NOTE 1—A typical ordering description is as follows: 25 rolls, 50 ft
1
This specification is under the jurisdiction ofASTM Committee F14 on Fences
each, chain-link fence fabric, zinc coated after weaving, 2-in. mesh,
and is the direct responsibility of Subcommittee F14.40 on Chain Link Fabric and
0.148-in. wire, 60 in. high, knuckled both selvages, Class 2 coating to
Wire Accessories.
ASTM A 392 - XX.
Current edition approved Oct. 15, 2006. Published October 2006. Originally
approved in 1955. Last previous edition approved in 2003 as A 392 - 03.
5. Materials
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
5.1 If zinc-coated before weaving, the wire from which the
Standards volume information, refer to the standard’s Document Summary page on
fabric is woven shall conform to all requirements of Specifi-
the ASTM website.
3 cation A 817 for Type II coating, in the class of coating
AvailablefromStandardizationDocumentsOrderDesk,Bldg.4SectionD,700
Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS. specified (Class 4 or Class 5).
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
A 392–06
5.2 If zinc-coated after weaving, the base metal shall be heights to and including 20 ft. [6.56 m]. The height of fabric
steel of such quality and purity that, when drawn to the size of shall be the overall dimension
...