ASTM D2277-87

Specification for Fiberboard Nai-Base Sheathing (Withdrawn 1992)

General Information

• Status: Withdrawn
• Withdrawal Date: 14-Feb-1992
• ICS: 79.060.20 - Fibre and particle boards
• Technical Committee: D07 - Wood

Standards Content (Sample)

.. .
ND-STD ASTM D22’77-87 56 = 9979778 017027’76 B 5 ,-,
ASTM D 2277-87
28 September 1988
SUPERSEDING
ASTM D 2277-75(80)
..
14 June 1982
USED INSTEAD OF
*LLL-I-535 (IN PART)
15 August 1977
ADOPTION NOTlCE
This non-Government document was adopted on 28 September 1988 and is
approved for use by the DOD.
The indicated industry group has furnished the
clearance required by existing regulations. Copies of the document are
stocked by DOD Single Stock Point, Naval Publications and Forms Center,
Philadelphia, PA 19120,
for issue to DOD activities only.
Contractors and
industry groups must obtain copies from ASTM, 1916 Race Street, Philadelphia,
PA 19103.
Title of Document:
Standard Specification for
Fiberboard Nail-Ease Sheathing
Date of Specific Issue Adopted:
February 27, 1987
Releasing Industry Group:
American Society for Testing and
Ma te ri a 1 s
*NOTE:
Use ASTM C 2277 instead of Class E, Style 3 OF LLL-1-535.
Use
ASTM C 532 instead of- Class I of LLL-1-535.
For all
other classes and styles
in CLL-1-535, use ASTM C 208.
Custodians:
Mi 1 i tary Coordinating Acti vi ty :
Army - ME
Navy - YD
Navy - YO
(Project 5640-0469)
User activities: -
Army - CE
Navy - MC
AMSC N/A
FSC 5640
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited. ,
THIS DOCUMENT CONTAINS --PAGES*
,----------

---------------------- Page: 1 ----------------------
Designation: D 2277 - 87
ab
AMERICAN SOCIETY FOR TESTING AND MATERIALS
1916 Race SI. Philadelphia, Pa. 19103
Reprinted from the Annual Book of ASTM Standards, Copyright ASTM
If not lisled in the current combined index, will appear in the next edition.
Standard Specification for
FIBERBOARD NAIL-BASE SHEATHING'
This standard is issued under the tixed deSignation D 2277; the number immediately following the designation indicates the year of
onginai adoption or, in the oseof revision, the year of iast revision. A number ia parentheses indicates the year of iast reapproval.
A superscript epsilon (e) indicates an editorial change since the iast revision or reapproval.
This spec$cation has been approved fir use by agencies of the Depariment of Dpfenw and fir listing in the DoD Index of
Spa$catians and Sta&&-
1. scope
manufactured of refined or partly refined iigno-
cellulosic fibers with a primary integral bond,
1.1 This specification covers fiberboard nail-
and to which other materials may have been
base sheathing, a Y2-in. (12.5-mm) thick struc-
added during manufacture to improve ceriain
tural fiberboard product designed for use in
properties.
frame construction to permit the direct applica-
tion of exterior siding materials such as wood
5. Physical Requirements
and asbestos shingles. When this material is
5.1 Fiberboard nd-base sheathing shall con-
properly atfached to the frames ofwalls according
form to the physical requirements prescribed in
to the manufacturer's recommendations, it will
Table 1.
also result in a wall that will satisfy the require-
ments for rigidity from racking forces of certain
6. Dimensions d Tolerances
specifj4ng agencies without auxiliary bracing of
6.1 The standarddimensions of the fiberboard
the frame.
nail-base sheathing shall be 1/2 in. (12.5 mm) thick
2. Referenced Documents
by 4 fi (1.22 m) wide by 8 fi (2.44 m) or 9 ft
(2.74 m) long? Tolerances on these dimensions
2. I ASTM Standards:
are prescribed in Table 2.
C 209 Method of Testing Insulating Board
(Cellulosic Fiber), Structural and Decora-
7. Workmanship and Finish
tive2
7.1 The surface shall be free from cracks,
C 355 Test Methods for Water Vapor Trans-
lumps, excessive departure from planeness, or
mission of Thick Materiais3
other defects.
D 1037 Methods of Evaluating the Properties
of Wood-Base Fiber and Particle Panel
8. Sampling
Materials'
8.1 Boards shall be selected at random so as
to give a fair representation of the entire ship
3. Definitioa
ment. The number of boards to be selected for
3. I fiberboard nail-base sheathing-a pre-
test shall be as follows:
formed, rigid, fibrous-felted homogeneous panel,
composed principaüy of wood or cane fibers
'niis speciñcation is under the jurisdiction of fim com-
integrally treated with asphalt or other suitable mittee D7 on Wood and is the nsponsiiüity of Subcommittee
I5 on Wood-Base Fiber and Partick Panel Materials
W7.
sizing material.
Current edition approved Feb. 27, 1987. Published Apni
1987. Originally pubüsheà as D 2277 - 64 T. Lart previous
4. Materiais aa8 Manufacture edition 5,2277 - 75 ( 1980)e'.
Annual Book qfASTM Slatwbrak, Vd 04.06.
4.1 Fiberboard nail-base sheathing is manu-
'Discontinued, sœ 1981 Annuai Baok of ASTM SiMdardr,
factured by a felting or molding process with part 18.
. ;Annual Book qfASTM SI&&, Vd 04.09.
suitable sizing material incorporated in the prod-
Larger panels are avaiiabk from some manufaaunnasa
uct to render it water-resistant. The material is
sp6ciaimud.
...