CEN/CLC ISO/IEC/TS 23532-2:2024

Information security, cybersecurity and privacy protection - Requirements for the competence of IT security testing and evaluation laboratories - Part 2: Testing for ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)

This document complements and supplements the procedures and general requirements found in ISO/IEC 17025:2017 for laboratories performing testing based on ISO/IEC 19790 and ISO/IEC 24759.

Informationssicherheit, Cybersicherheit und Schutz der Privatsphäre - Anforderungen an die Kompetenz von Prüf- und Evaluierungsstellen für IT-Sicherheit - Teil 2: Prüfung für ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)

Sécurité de l'information, cybersécurité et protection de la vie privée - Exigences relatives aux compétences des laboratoires d'essais et d'évaluation de la sécurité TI - Partie 2: Essais pour l'ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)

Informacijska varnost, kibernetska varnost in varovanje zasebnosti - Zahteve za usposobljenost laboratorijev za testiranje in ocenjevanje varnosti IT - 1. del: Preskušanje po ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)

General Information

• Status: Published
• Publication Date: 24-Sep-2024
• ICS: 35.030 - IT Security
• Technical Committee: CEN/CLC/TC 13 - Cybersecurity and Data Protection
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Sep-2024
• Due Date: 19-Nov-2025
• Completion Date: 25-Sep-2024
• Ref Project: kSIST-TS FprCEN/CLC ISO/IEC/TS 23532-2:2024 - Information security, cybersecurity and privacy protection - Requirements for the competence of IT security testing and evaluation laboratories - Part 2: Testing for ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS FprCEN/CLC ISO/IEC/TS 23532-
2:2024
01-julij-2024
Informacijska varnost, kibernetska varnost in varovanje zasebnosti - Zahteve za
usposobljenost laboratorijev za testiranje in ocenjevanje varnosti IT - 1. del:
Preskušanje po ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)
Information security, cybersecurity and privacy protection - Requirements for the
competence of IT security testing and evaluation laboratories - Part 2: Testing for
ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)
Sécurité de l'information, cybersécurité et protection de la vie privée - Exigences
relatives aux compétences des laboratoires d'essais et d'évaluation de la sécurité TI -
Partie 2: Essais pour l'ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021)
Ta slovenski standard je istoveten z: FprCEN/CLC ISO/IEC/TS 23532-2
ICS:
35.030 Informacijska varnost IT Security
kSIST-TS FprCEN/CLC ISO/IEC/TS en,fr,de
23532-2:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL ISO/IEC TS
SPECIFICATION 23532-2
First edition
2021-11
Information security, cybersecurity
and privacy protection —
Requirements for the competence
of IT security testing and evaluation
laboratories —
Part 2:
Testing for ISO/IEC 19790
Sécurité de l'information, cybersécurité et protection de la vie
privée — Exigences relatives aux compétences des laboratoires
d'essais et d'évaluation de la sécurité TI —
Partie 2: Essais pour l'ISO/IEC 19790
Reference number
ISO/IEC TS 23532-2:2021(E)
© ISO/IEC 2021
ISO/IEC TS 23532-2:2021(E)
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
© ISO/IEC 2021 – All rights reserved

ISO/IEC TS 23532-2:2021(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General Requirements . 2
4.1 Impartiality . 2
4.2 Confidentiality . 3
5 Structural requirements .3
6 Resource requirements .4
6.1 General . 4
6.2 Personnel . 4
6.3 Facilities and environmental conditions . 6
6.4 Equipment . 8
6.5 Metrological traceability . 11
6.6 Externally provided products and services .12
7 Process requirements .12
7.1 Review of requests, tenders and contracts .12
7.2 Selection, verification and validation of methods . 13
7.2.1 Selection and verification of methods . 13
7.2.2 Validation of methods . 14
7.3 Sampling . 15
7.4 Handling of test or calibration items . 15
7.5 Technical records . 16
7.6 Evaluation of measurement of uncertainty . 16
7.7 Ensuring the validity of results . 17
7.8 Reporting of results . 17
7.8.1 General . 17
7.8.2 Common requirements for reports (test, calibration or sampling) . 17
7.8.3 Specific requirements for test reports . 18
7.8.4 Specific requirements for calibration certificates . 18
7.8.5 Reporting sampling – specific requirements . 18
7.8.6 Reporting statements of conformity . 18
7.8.7 Reporting opinions and interpretations . 19
7.8.8 Amendments to reports . 19
7.9 Complaints. 19
7.10 Nonconforming work . 19
7.11 Control of data information management . 20
8 Management system requirements .20
8.1 Options. 20
8.1.1 General .20
8.1.2 Option A . 20
8.1.3 Option B . 20
8.2 Management system documentation (option A) . 20
8.3 Control of management system documents (option A) . 21
8.4 Control of records (option A) . 21
8.5 Actions to address risks and opportunities (option A) . 22
8.6 Improvement (option A) . 22
8.7 Corrective actions (option A) . 22
8.8 Internal audits (option A). 22
8.9 Management reviews (option A) . 22
iii
© ISO/IEC 2021 – All rights reserved

ISO/IEC TS 23532-2:2021(E)
Annex A (informative) Metrological traceability .23
Annex B (informative) Management system options .24
Annex C (informative) Standards relation in cryptographic module testing .25
Bibliography .26
iv
© ISO/IEC 2021 – All rights reserved

ISO/IEC TS 23532-2:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC
list of patent declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as infor
...