EN 4641-104:2010

Aerospace series - Cables, optical 125 μm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard

This product standard specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with two 62,5/125 µm graded index fibre cores, 4,95 mm nominal outside diameter and of semi-loose construction. The basic construction is a pair of the cables defined in EN 4641-102 with added sheaths for ruggedized usages.

Luft- und Raumfahrt - Lichtwellenleiterkabel, Mantelaußendurchmesser 125 µm - Teil 104: Kompaktader, widerstandsfähige Duplexkonstruktion, 62,5/125 µm GI-Faser, Kabelaußendurchmesser 4,95 mm - Produktnorm

Diese Produktnorm legt die allgemeinen Eigenschaften, Bedingungen für Qualifikation, Abnahme und
Qualitätssicherung für ein Lichtwellenleiterkabel mit zwei 62,5/125 μm Gradientenfaserkernen, Kabelaußendurchmesser
4,95 mm und Kompaktaderaufbau, fest. Die Grundkonstruktion ist ein Paar des in EN 4641-102
festgelegten Kabels mit zusätzlichen Mänteln für widerstandsfähige Anwendungen.

Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 104 : Câble à structure semi-libre, renforcée, double voie fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 4,95 mm - Norme de produit

Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 104. del: Poltrdi kabli lahke izvedbe 62,5/125 µm, zunanji premer vlakna 4,95 mm - Standard za izdelek

Ta standard za proizvod določa glavne značilnosti, kvalifikacijske pogoje ter zagotavljanje sprejemljivost in kakovosti za optični kabel z dvema vlaknenima jedroma, s stopnjevalnim lomnim količnikom 62,5/125 µm, s 4,95 mm nominalnim zunanjim premerom in poltrdo konstrukcijo. Osnovna konstrukcija je par določenih kablov z dodanimi tulci za robustne uporabe, opredeljen v EN 4641-102.

General Information

• Status: Published
• Publication Date: 23-Nov-2010
• Withdrawal Date: 30-May-2011
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 24-Nov-2010
• Completion Date: 24-Nov-2010
• Ref Project: SIST EN 4641-104:2011 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 104: Halbfester Leiteraufbau GI 62,5/125 µm, Faser Kabelaußendurchmesser 4,95 mm - ProduktnormSérie aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 104 : Câble à structure semi libre, renforcée, double voie fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 4,95 mm - Norme de produit49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4641-104:2010SIST EN 4641-104:2011en01-december-2011SIST EN 4641-104:2011SLOVENSKI
STANDARD



SIST EN 4641-104:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4641-104
November 2010 ICS 49.060
English Version
Aerospace series - Cables, optical 125 µm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard
Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 104 : Câble à structure semi-libre, renforcée, double voie fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 4,95 mm - Norme de produit
Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 104: Halbfester Leiteraufbau GI 62,5/125 µm, Faser Kabelaußendurchmesser 4,95 mm - Produktnorm This European Standard was approved by CEN on 2 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4641-104:2010: E SIST EN 4641-104:2011



EN 4641-104:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Required characteristics .45 Cable construction .56 Materials .57 Test methods and performances in accordance with EN 3745-100 .67.1 Optical fibre tests.67.2 Fibre optic component cable tests .67.3 Ruggedized fibre optic cable .68 Tooling . 109 Quality assurance . 1010 Designation, marking and colours . 1010.1 Designation .
...