EN 3745-404:2019

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock

This document specifies a method to determine the effects of thermal shock on an optical fibre or cable.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 404: Thermischer Schock

Dieses Dokument legt ein Verfahren zur Bestimmung der Auswirkungen von thermischem Schock auf Licht-wellenleiter oder Lichtwellenleiterkabel fest.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 404 : Choc thermique

Le présent document spécifie une méthode pour déterminer les effets d’un choc thermique sur une fibre ou un câble optique.

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 404. del: Toplotni udar

Ta dokument določa metodo za določanje učinkov toplotnega udara na optično vlakno ali kabel.

General Information

• Status: Published
• Publication Date: 17-Sep-2019
• Withdrawal Date: 30-Mar-2020
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Sep-2019
• Completion Date: 18-Sep-2019
• Ref Project: SIST EN 3745-404:2019 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock

Relations

• Replaces: EN 3745-404:2005 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
• Effective Date: 04-Feb-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN 3745-404:2006
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne
metode - 404. del: Toplotni udar
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404:
Thermal shock
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
404: Thermischer Schock
Série aérospatiale Fibres et câbles optiques à usage aéronautique Méthodes d'essais
Partie 404 : Choc thermique
Ta slovenski standard je istoveten z: EN 3745-404:2019
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3745-404
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 49.090 Supersedes EN 3745-404:2005
English Version
Aerospace series - Fibres and cables, optical, aircraft use -
Test methods - Part 404: Part 404: Thermal shock
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 404 : Partie Luftfahrzeuge - Prüfverfahren - Teil 404: Teil 404:
404 : Choc thermique Thermischer Schock
This European Standard was approved by CEN on 14 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3745-404:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
5 Apparatus. 5
6 Method . 5

European foreword
This document (EN 3745-404:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text
...