EN 4550-4:2014

Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends

This standard defines the dimensions and tolerances for the female sealing end of inch series pipe couplings, 37°, for aerospace applications.
Matched fluid system component shall have a male sealing end in accordance with EN 4550-1.

Luft- und Raumfahrt - Rohrverschraubung 37° - Konstruktionsblatt - Inch-Reihe - Teil 4: Dichtgeometrie

Série aérospatiale - Système de raccordement 37° - Configuration géométrique - Série inch - Partie 4: Extrémités d´étanchéité femelles

Aeronavtika - Cevni priključek, 37° - Konstrukcijski list - Colska izvedba - 4. del: Ženski tesnilni končniki

Ta standard določa dimenzije in odstopanja za ženske tesnilne končnike colske izvedbe cevnih priključkov 37° za uporabo v aeronavtiki. Ujemajoča se tekočinska sistemska komponenta mora imeti moški tesnilni končnik v skladu s standardom EN 4550-1.

General Information

• Status: Published
• Publication Date: 16-Dec-2014
• Withdrawal Date: 29-Jun-2015
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 17-Dec-2014
• Completion Date: 17-Dec-2014
• Ref Project: SIST EN 4550-4:2015 - Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends

Relations

• Replaces: EN 4550-4:2003 - Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends
• Effective Date: 24-Dec-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Rohrverschraubung 37° - Konstruktionsblatt - Inch-Reihe - Teil 4: DichtgeometrieSérie aérospatiale - Système de raccordement 37° - Configuration géométrique - Série inch - Partie 4: Extrémités d´étanchéité femellesAerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4550-4:2014SIST EN 4550-4:2015en,fr,de01-marec-2015SIST EN 4550-4:2015SLOVENSKI
STANDARDSIST EN 4550-4:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4550-4
December 2014 ICS 49.080 Supersedes EN 4550-4:2003English Version
Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends
Série aérospatiale - Système de raccordement 37° - Configuration géométrique - Série inch - Partie 4: Extrémités d´étanchéité femelles
Luft- und Raumfahrt - Rohrverschraubung 37° - Konstruktionsblatt - Inch-Reihe - Teil 4: Dichtgeometrie This European Standard was approved by CEN on 11 October 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4550-4:2014 ESIST EN 4550-4:2015
...