EN 4800-008:2010

Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings

This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy pre-production and production castings. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil 008: Ausfallmuster- und Seriengussstücke

Diese Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Inspektion und Lieferung von
Ausfallmuster- und Seriengussstücken aus Titan und Titanlegierungen fest. Sie ist anzuwenden, wenn sie bei
Verweisung auf oder in Verbindung mit der EN-Werkstoffnorm erwähnt wird, sofern in der Zeichnung,
Bestellung oder der Prüfanweisung nichts anderes angegeben ist.

Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 008: Pièces types et pièces de série, moulées

Cette Norme européenne définit les exigences relatives aux commandes, fabrication, essais, contrôles et
livraison des pièces types et pièces de série, moulées en titane et alliages de titane. La présente norme est
applicable lorsqu'elle est citée dans la norme de matériaux EN et conjointement avec celle-ci sauf instruction
contraire figurant sur le plan, la commande ou la fiche d’essai.

Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 008. del: Vzorci in ulitki za proizvodnjo

Ta standard določa zahteve za naročanje, proizvodnjo, preskušanje, pregledovanje in dobavo vzorcev in ulitkov za proizvodnjo iz titana in titanovih zlitin. Uporablja se, kadar se nanaša na standard EN za materiale in skupaj z njim, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.

General Information

• Status: Published
• Publication Date: 02-Nov-2010
• Withdrawal Date: 30-May-2011
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Nov-2010
• Completion Date: 03-Nov-2010
• Ref Project: SIST EN 4800-008:2012 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
$HURQDYWLND7LWDQLQWLWDQRYH]OLWLQH7HKQLþQDVSHFLILNDFLMDGHO9]RUFLLQ
XOLWNL]DSURL]YRGQMR
Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-
production and production castings
/XIWXQG5DXPIDKUW7LWDQXQG7LWDQOHJLHUXQJHQ.QHWHU]HXJQLVVH7HFKQLVFKH
/LHIHUEHGLQJXQJHQ7HLO$XVIDOOPXVWHUXQG6HULHQJXȕVWFNH
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 008:
Pièces types et pièces de série, moulées
Ta slovenski standard je istoveten z: EN 4800-008:2010
ICS:
49.025.30 Titan Titanium
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4800-008
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 49.025.30
English Version
Aerospace series - Titanium and titanium alloys - Technical
specification - Part 008: Pre-production and production castings
Série aérospatiale - Titane et alliages de titane - Luft- und Raumfahrt - Titan und Titanlegierungen
Spécification technique - Partie 008: Pièces types et pièces Kneterzeugnisse - Technische Lieferbedingungen - Teil
de série, moulées 008: Ausfallmuster- und Seriengußstücke
This European Standard was approved by CEN on 20 February 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4800-008:2010: E
worldwide for CEN national Members.

Contents Page
Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Wording of order . 7
5 Health and safety . 7
6 Technical requirements . 7
Annex A (normative) Flaw penetrant inspection standard . 22
Foreword
This document (EN 4800-008:2010) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at
the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Introduction
This standard is part of the series of EN metallic material standards for aerospace applications. The general
organization of this series is described in EN 4258.
1 Scope
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of
titanium and titanium alloy pre-production and production castings. It shall be applied when referred to and in
conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection
schedule.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2002-001, Aerospace series — Metallic materials — Test methods — Part 001: Tensile testing at

ambient temperature
EN 2002-002, Aerospace series — Metallic materials — Test methods — Part 002: Tensile testing at
elevated temperature
EN 2002-005, Aerospace series — Test methods for metallic materials — Part 005: Uninterrupted creep and
stress-rupture testing
EN 2002-16, Aerospace series — Metallic materials — Test methods — Part 16: Non-destructive testing —
1)
Penetrant testing
EN 2002-21, Aerospace series — Test methods for metallic materials — Part 21: Radiographic testing of
1)
castings
EN 2032-1, Aerospace series — Metallic materials — Part 1: Conventional designation
EN 2032-2, Aerospace series — Metallic materials — Part 2: Coding of metallurgical condition in delivery
condition
EN 2078, Aerospace series — Metallic materials — Manufacturing schedule, inspection schedule, inspection
and test report — Definition, general principles, preparation and approval
EN 3976, Aerospace series — Titanium and titanium alloys — Test method — Chemical analysis for the
determination of hydrogen content
EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links
between types of EN standards and their use
1)
EN 4259, Aerospace series — Metallic materials — Definition of general terms

1) Published as ASD-STAN Prestandard at the date of publication of this standard.
EN 4800-007, Aerospace series — Titanium and titanium alloys — Technical specification — Part 007:
Remelting stock
EN 9100, Quality Management Systems — Requirements for Aviation, Space and Defense Organizations
EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace
standard parts
EN ISO 6892-1 Metallic materials — Tensile testing — Part 1: Method of test at room temperature
(ISO 6892-1:2009)
prEN ISO 6892-2 Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
(ISO/DIS 6892-2:2009)
TR 2410, Aerospace series — Metallic materials — Relationship between dimensional standards and
2)
material standards
3)
ASTM E 1320, Standard reference radiographs for titanium castings
3)
AMS 2750, Pyrometry
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 4259 and the following apply.
3.1
batch
same melt, heat treat and HIP cycle
3.2
HIP
Hot Isostatically Pressed
3.3
melt
mass of homogeneous liquid metal from a single charge
3.4
remelt
solid metal resulting from a single melt
3.5
parent cast
cast of remelting stock to be used for the production of castings
3.6
remelting stock
metal supplied in cast or wrought form, the composition of which has been established by chemical analysis

2) Published as ASD-STAN Technical Report at the date of publication of this standard.
3) Published by: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, PO Box C700, West
Conshohocken, PA, 19428-2959 USA.
4 Wording of order
The order shall clearly indicate:
 quantities to be supplied;
 dates of delivery;
 material standard number;
 delivery condition and metallurgical code of products;
 dimensions and tolerances or reference to an appropriate dimensional standard;
 product designation, when required;
 forwarding address;
 nature and type of packing, if required;
 definition and frequency of any special tests and their retest procedures, if required.
5 Health and safety
Products in the delivery condition shall fulfil the health and safety laws of the area of the country when and
where it is to be delivered.
A product safety data sheet shall be available.
6 Technical requirements
6.1 General
The product shall be manufactured in accordance with the requirements of the relevant material standard
and the applicable requirements of this specification. A manufacturing schedule shall be established and
applied in accordance with EN 2078.
The product shall satisfy the requirements of the material standard and/or order and shall be free from
irregularities prejudicial to the subsequent manufacture or use of this product.
Notwithstanding previous acceptance complying with this material standard, any product that is found, at a
later stage, to contain such defects shall be rejected.
Unless otherwise specified, the requirements in Tables 1 and 2 shall apply in conjunction with those of the
relevant material standard. Table 1 relates to lines 1 to 29 (inclusive) of the material standard and Table 2
relates to lines 30 onwards in which the sub-line format is also used. Lines 2 to 98 may also be opened in
line 100 if the material standard details specific qualification requirements. If a specific line number is not
shown in Tables 1 and 2, the requirement is stated in the material standard and/or order.
The requirements of the order and/or material standard shall over-ride the requirements of the technical
specification.
6.2 Qualification requirements
Qualification requirements when invoked by the material standard and/or order are detailed in Tables 1 and 2.
Unless otherwise agreed between the manufacturer and purchaser the qualification phase shall be run on
the first fair batches.
6.3 Release requirements
6.3.1 Release tests
Release testing shall be the responsibility of the manufacturer.
The purchaser reserves the right to perform any of the inspections and/or tests required by the material
standard and/or order.
The test samples shall be representative of the product.
When required the manufacturer shall inform the purchaser of the planned dates for extraction of samples
and release testing in order that these operations may be witnessed.
Tables 1 and 2 detail the requirements for each line of the material standard. Unless otherwise specifically
requested by the purchaser, a particular inspection and/or test for release shall be carried out if
corresponding acceptance criteria and/or values are stated in the applicable material standard, but see also
in 6.3.5.
6.3.2 Retests
If the test procedure or test piece preparation is faulty, testing shall be re-applied at the original frequency
after rectification of the original cause of failure.
When failure cannot be attributed to faulty testing, or test piece preparation, further test samples shall be
selected at twice the original frequency from the product, one of which shall be that on which the original
results were obtained unless already withdrawn by the manufacturer after suitable identification of the cause
of failure. If all retest results are satisfactory, the batch shall be accepted. If one or more tests are
unsatisfactory, the batch shall be:
 rejected; or
 100 % retested and the conforming products accepted; or
 partially or fully re-heat treated if heat treatment can rectify the cause of the failure and tested as a
completely new batch except for chemical composition, for which redetermination of hydrogen content is
required. No product or test sample shall be re-heat treated more than twice.
6.3.3 Rejection
Any failure to meet the requirements of the material standard shall be cause for rejection.
6.3.4 Special tests
Special tests may be required by the purchaser. In such cases, the nature of the test, method, frequency and
technical requirements shall be specified on the order or inspection schedule and shall be mutually agreed
by the manufacturer and purchaser.
6.3.5 Capability clause
Where capability clause is invoked and where sufficient statistical evidence exist
...