EN 3311:2023

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

This document specifies the requirements relating to:
Titanium alloy TI-P64001 (Ti-6Al-4V)
Annealed
Bars for machining
D < 300 mm
900 MPa ≤ Rm ≤ 1 160 MPa
for aerospace applications

Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Stangen zum Zerspanen - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

Dieses Dokument legt die Anforderungen an:
Titanlegierung TI P64001 (Ti 6Al 4V)
Geglüht
Stangen zum Zerspanen
D ≤ 300 mm
900 MPa ≤ Rm ≤ 1 160 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Barres pour usinage - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

Le présent document spécifie les exigences relatives à :
Alliage de titane TI-P64001 (Ti-6Al-4V)
Recuit
Barres pour usinage
D < 300 mm
900 MPa ≤ Rm ≤ 1 160 MPa
pour les applications aérospatiales.

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjeno - Palice za obdelavo - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa

General Information

• Status: Published
• Publication Date: 19-Dec-2023
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 1 - Aluminium
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Dec-2023
• Completion Date: 20-Dec-2023
• Ref Project: SIST EN 3311:2024 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa

Relations

• Replaces: EN 3311:2009 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D < 110 mm
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3311:2024
01-februar-2024
Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjeno - Palice za obdelavo -
D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining
- D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Stangen zum
Zerspanen - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Barres pour
usinage - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
Ta slovenski standard je istoveten z: EN 3311:2023
ICS:
49.025.30 Titan Titanium
SIST EN 3311:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3311:2024

---------------------- Page: 2 ----------------------
SIST EN 3311:2024


EN 3311
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 49.025.30 Supersedes EN 3311:2009
English Version

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) -
Annealed - Bars for machining - D  300 mm - 900 MPa 
Rm  1 160 MPa
Série aérospatiale - Alliage de titane TI-P64001 (Ti- Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-
6Al-4V) - Recuit - Barres pour usinage - D  300 mm - 6Al-4V) - Geglüht - Stangen zum Zerspanen - D  300
900 MPa  Rm  1 160 MPa mm - 900 MPa  Rm  1 160 MPa
This European Standard was approved by CEN on 15 October 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3311:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3311:2024
EN 3311:2023 (E)
Contents Page
European foreword . 3
Introduction . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 3311:2024
EN 3311:2023 (E)
European foreword
This document (EN 3311:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2024, and conflicting national standards shall be withdrawn at
th
...