EN ISO 11140-3:2007
(Main)Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007)
Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007)
20070214 - At Publication stage please update Foreword as requested by CEN/TC 102 (see network)
Sterilisation von Produkten für die Gesundheitsfürsorge - Chemische Indikatoren - Teil 3: Indikatorsysteme der Klasse 2 zur Verwendung im Bowie-Dick-Dampfdurchdringungstest (ISO 11140-3:2007)
Dieser Teil von ISO 11140 legt die Anforderungen an chemische Indikatoren fest, die beim Dampfdurchdringungsversuch für Dampfsterilisatoren für verpacktes Sterilisiergut, z. B. Instrumente und poröse Materialien, verwendet werden sollen. Der Indikator für diesen Zweck ist ein Indikator der Klasse 2, wie er in ISO 11140 1 beschrieben wird.
Diesem Teil von ISO 11140 entsprechende Indikatoren sind zur Verwendung in Kombination mit dem Norm-Prüfpaket, wie es in EN 285 beschrieben ist, vorgesehen. Dieser Teil von ISO 11140 berücksichtigt nicht die Leistungsfähigkeit des Norm-Prüfpakets, sondern legt die Leistungsfähigkeit der Indikatorsysteme fest.
Stérilisation des produits de santé - Indicateurs chimiques - Partie 3: Systèmes d'indicateurs de Classe 2 pour utilisation lors de l'essai de Bowie et Dick de pénétration de la vapeur (ISO 11140-3:2007)
La présente partie de l’ISO 11140 spécifie les exigences relatives aux indicateurs chimiques destinés à être utilisés dans l'essai de pénétration de la vapeur pour les produits emballés, par ex. les instruments et matériaux poreux. L’indicateur prévu dans ce but est un indicateur de classe 2, tel que décrit dans l’ISO 111401-1.
Les indicateurs conformes à la présente partie de l’ISO 11140 sont destinés à être utilisés en association avec l’emballage d’essai normalisé tel que décrit dans l’EN 285. La présente partie de l’ISO 11140 ne prend pas en compte la performance de cet emballage, mais spécifie la performance des indicateurs.
Sterilizacija izdelkov za zdravstveno nego – Kemijski indikatorji – 3. del: Sistemi indikatorjev razreda 2 za uporabo pri Bowie-Dickovem preskusu prodiranja pare (ISO 11140-3:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2007
1DGRPHãþD
SIST EN 867-3:2000
SIST EN 867-3:2000/AC:2000
Sterilizacija izdelkov za zdravstveno nego – Kemijski indikatorji – 3. del: Sistemi
indikatorjev razreda 2 za uporabo pri Bowie-Dickovem preskusu prodiranja pare
(ISO 11140-3:2007)
Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator
systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007)
Sterilisation von Produkten für die Gesundheitsfürsorge - Chemische Indikatoren - Teil 3:
Indikatorsysteme der Klasse 2 zur Verwendung im Bowie-Dick-Dampfdurchdringungstest
(ISO 11140-3:2007)
Stérilisation des produits de santé - Indicateurs chimiques - Partie 3: Systemes
d'indicateurs de classe 2 pour utilisation lors de l'essai de Bowie et Dick de pénétration
de la vapeur (ISO 11140-3:2007)
Ta slovenski standard je istoveten z: EN ISO 11140-3:2007
ICS:
11.080.01 Sterilizacija in dezinfekcija na Sterilization and disinfection
splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11140-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 11.080.01 Supersedes EN 867-3:1997
English Version
Sterilization of health care products - Chemical indicators - Part
3: Class 2 indicator systems for use in the Bowie and Dick-type
steam penetration test (ISO 11140-3:2007)
Stérilisation des produits de santé - Indicateurs chimiques - Sterilisation von Produkten für die Gesundheitsfürsorge -
Partie 3: Systèmes d'indicateurs de Classe 2 pour Chemische Indikatoren - Teil 3: Indikatorsysteme der
utilisation lors de l'essai de Bowie et Dick de pénétration de Klasse 2 zur Verwendung im Bowie-Dick-
la vapeur (ISO 11140-3:2007) Dampfdurchdringungstest (ISO 11140-3:2007)
This European Standard was approved by CEN on 14 March 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11140-3:2007: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 11140-3:2007) has been prepared by Technical Committee ISO/TC
198 "Sterilization of health care products" in collaboration with Technical Committee CEN/TC
102 "Sterilizers for medical purposes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2007, and conflicting
national standards shall be withdrawn at the latest by September 2007.
This document supersedes EN 867-3:1997.
This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).
The series EN ISO 11140 consists of the following parts under the general title Sterilization of
health care products - Chemical indicators:
Part 1: General requirements
Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration
test
Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of
steam penetration.
Attention is drawn to the fact that the series ISO 11140 additionally consists of Part 5: Class 2
indicators for Bowie and Dick-type air removal tests. However, this Part of ISO 11140 will not
be part of the series EN ISO 11140 because CEN/TC 102 decided not to adopt ISO 11140-5
as a European Standard.
In addition, reference is made to EN 867-5 Non-biological systems for use in sterilizers -
Part 5: Specification for indicator systems and process challenge devices for use in
performance testing for small sterilizers type B and type S and to EN ISO 15882 Sterilization
of health care products - Chemical indicators - Guidance for selection, use and interpretation
of results: Both standards are currently being revised under the Vienna Agreement
(ISO/TC 198 lead).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 11140-3:2007 has been approved by CEN as EN ISO 11140-3:2007 without
any modifications.
INTERNATIONAL ISO
STANDARD 11140-3
Second edition
2007-03-15
Sterilization of health care products —
Chemical indicators —
Part 3:
Class 2 indicator systems for use in the
Bowie and Dick-type steam penetration
test
Stérilisation des produits de santé — Indicateurs chimiques —
Partie 3: Systèmes d'indicateurs de Classe 2 pour utilisation lors de
l'essai de Bowie et Dick de pénétration de la vapeur
Reference number
ISO 11140-3:2007(E)
©
ISO 2007
ISO 11140-3:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 11140-3:2007(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 General requirements. 2
5 Indicator system format . 2
6 Performance requirements . 2
7 Packaging and labelling. 3
8 Quality assurance. 4
Annex A (normative) Determination of strength after steam sterilization . 5
Annex B (normative) Estimation of visual difference between colour of the substrate and the
changed (or unchanged) indicator system by determination of relative reflectance density. 6
Annex C (normative) Determination of indicator colour change on exposure to dry saturated
steam. 10
Annex D (normative) Determination of indicator colour change on exposure to dry heat . 11
Annex E (normative) Accelerated ageing of test samples. 12
Annex F (normative) Determination of transfer of indicator to standard test pack on processing . 13
Annex G (normative) Determination of shelf life of the product . 14
Annex H (normative) Steam exposure apparatus. 15
Annex I (normative) Determination of sensitivity of the indicator to the presence of air . 17
Annex J (normative) Air injection system . 18
Annex K (normative) Standard test pack. 20
Bibliography . 21
ISO 11140-3:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11140-3 was prepared by Technical Committee ISO/TC 198, Sterilization of health care products.
This second edition cancels and replaces the first edition (ISO 11140-3:2000) which has been technically
revised.
ISO 11140 consists of the following parts, under the general title Sterilization of health care products —
Chemical indicators:
⎯ Part 1: General requirements
⎯ Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test
⎯ Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam
penetration
⎯ Part 5: Class 2 indicators for Bowie and Dick-type air removal tests
iv © ISO 2007 – All rights reserved
ISO 11140-3:2007(E)
Introduction
The Bowie and Dick test is a performance test for steam sterilizers for wrapped goods and porous loads. As
such it is performed during the demonstration of conformance of steam sterilizers to EN 285 and as a routine
test of performance in ISO 17665-1. The test method is described in EN 285.
A failure of the Bowie and Dick test is symptomatic of a number of potential problems with the sterilizer that
could compromise the uniform sterilization of a load to be processed. This failure is not conclusive proof that
the fault in the sterilizer is due to air retention, air leakage or non-condensable gases and it can be necessary
to investigate other causes of failure.
The Bowie and Dick test was conceived as a test for successful air removal from high-vacuum porous-load
[1]
sterilizers used in the sterilization of health care products . A successful Bowie and Dick test indicates rapid
and even penetration of steam into the test pack. The presence of air within the pack, due to an inefficient air
removal stage, an air leak during this stage or non-condensable gases in the steam supply, is a circumstance
which can lead to failure of the test. The result of the test may also be affected by other factors which inhibit
steam penetration. The test does not necessarily demonstrate either achievement of the required temperature
or maintenance of that temperature for the required time to ac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.