prEN 2252

Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - Bars - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Forgings
Bars
De ≤ 100 mm
1 080MPa ≤ Rm ≤ 1 250 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) - Gesenk- und Freiformschmiedestücke - Stangen - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa

No Scope available

Série aérospatiale - Acier 15CrMoV6 (1.7334) - Pièces forgées ou matricées - Barres - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa

Le présent document spécifie les exigences relatives à :
Acier 15CrMoV6 (1.7334)
Pièces forgées ou matricées
Barres
De ≤ 100 mm
1 080MPa ≤ Rm ≤ 1 250 MPa
pour applications aérospatiales.
W.nr : 1.7334.
Désignation ASD-STAN : FE-PL1505.

Aeronavtika - Jeklo 15CrMoV6 (1.7334) - Izkovki - Palice - De ≤ 100 mm - 1080 MPa ≤ Rm ≤ 1250 MPa

General Information

• Status: Not Published
• Publication Date: 15-Aug-2022
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 06-May-2021
• Completion Date: 06-May-2021
• Ref Project: oSIST prEN 2252:2021 - Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - Bars - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa

Relations

• Revises: EN 2252:2012 - Aerospace series - Steel FE-PL1505 (15CrMoV6) - 1 080 MPa ≤ Rm ≤ 1 250 MPa - Forgings - De ≤ 100 mm
• Effective Date: 20-Jun-2018

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2252:2021
01-april-2021
Aeronavtika - Jeklo 15CrMoV6 (1.7334) - Izkovki - Palice - De ≤ 100 mm - 1080 MPa
≤ Rm ≤ 1250 MPa
Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - Bars - De ≤ 100 mm - 1 080
MPa ≤ Rm ≤ 1 250 MPa
Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) - Gesenk- und Freiformschmiedestücke
- Stangen - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
Série aérospatiale - Acier 15CrMoV6 (1.7334) - Pièces forgées ou matricées - Barres -
De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
Ta slovenski standard je istoveten z: prEN 2252
ICS:
49.025.10 Jekla Steels
oSIST prEN 2252:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2252:2021

---------------------- Page: 2 ----------------------
oSIST prEN 2252:2021


DRAFT
EUROPEAN STANDARD
prEN 2252
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2021
ICS 49.025.10 Will supersede EN 2252:2012
English Version

Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings -
Bars - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
Série aérospatiale - Acier 15CrMoV6 (1.7334) - Pièces Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) -
forgées ou matricées - Barres - De ≤ 100 mm - 1 080 Gesenk- und Freiformschmiedestücke - Stangen - De ≤
MPa ≤ Rm ≤ 1 250 MPa 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2252:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2252:2021
prEN 2252:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 2252:2021
prEN 2252:2021 (E)
European foreword
This document (prEN 2252:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member cou
...