ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys

The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards for aerospace applications.
This Part 001 specifies the "General rules" framework valid for all parts.

The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards for aerospace applications. This Part 005 specifies the "Specific rules for steels".

This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted
Solution treated and precipitation treated
Sheets and strips
a ≤ 6 mm
1 070 MPa ≤ Rm ≤ 1 220 MPa
for aerospace applications.

This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Bars
De ≤ 200 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.
NOTE   Other common designations:
AIR: Z 8 CND 17 04.
Only the chemical composition of this document are considered.

This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted
Solution treated and precipitation treated
Bars for machining
a or D ≤ 200 mm
Rm ≥ 1 310 MPa
for aerospace applications.

This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Forgings
De ≤ 200 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.
NOTE   Other common designations:
AIR: Z 8 CND 17 04.
Only the chemical composition of this document are considered.

This European Standard specifies the requirements relating to:
Steel X4CrNiMo16-5-1
Air melted
Hardened and tempered
Sheets and plates
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.
ASD-STAN designation: FE-PM 3504.

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Air melted
Hardened and tempered
Sheets and strips
2 mm ≤ a ≤ 6 mm
1 080 MPa ≤ Rm ≤ 1 280 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Air melted
Hardened and tempered
Plates
6 mm ≤ a ≤ 20 mm
1 080 MPa ≤ Rm ≤ 1 280 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Air melted
Hardened and tempered
Sheet and strip
0,5 mm ≤ a ≤ 6 mm
980 MPa ≤ Rm ≤ 1 180 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted (ESR or VAR)
Solution treated and precipitation treated (H1025)
Bars for machining
a or D ≤ 250 mm
1 070 MPa ≤ Rm ≤ 1 200 MPa
Premium quality (pq)
for aerospace applications.
NOTE   Other designation: The ASD-STAN designation of this material is FE-PM1802.
Only the chemical composition of this document are to be considered.

This document specifies the dimensions and tolerances for drawn corrosion resisting steel lockwire for aerospace applications.

This document specifies the Izod impact test method for steel products used for aerospace applications. It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted, softened
Forging stocks
a or D ≤ 300 mm
for aerospace applications.

This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944)
Softened and cold worked
Wire for forged fasteners
D ≤ 15 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.

This document specifies the requirements relating to:
Steel X3CrNiMoAl (13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Bars for machining
a or D ≤ 200 mm
1 200 MPa ≤ Rm ≤ 1 350 MPa
for aerospace applications.
Material no (W.L): 1.4534.

This document specifies the requirements relating to:
Steel X5CrNiCu 17 4 (1.4542)
Air melted
Solution treated and precipitation treated
Sheets and strips
a ≤ 6 mm
Rm ≥ 1 070 MPa
for aerospace applications.
Material no (W.nr): 1.4542.
The ASD STAN designation of this material is FE PM3801.

This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Bars
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.
NOTE   Other common designations:
-   AIR: Z 8 CND 17-04.
-   Only the chemical composition according to this document is considered.

This document specifies the requirements relating to:
Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3)
Solution treated and precipitation treated
Bars and sections
De ≤ 200 mm
for aerospace applications.

This document specifies the requirements relating to:
Steel X5CrNiCu 17 4 (1.4542)
Air melted
Solution treated and precipitation treated
Plates
6 mm ≤ a ≤ 100 mm
Rm ≥ 1 070 MPa
for aerospace applications.

This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted
Solution treated and precipitation treated
Plates
6 mm < a ≤ 20 mm
1 070 MPa ≤ Rm ≤ 1 220 MPa
for aerospace applications.

This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Forgings
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.
NOTE   Other common designations:
-   AIR: Z 8 CND 17-04.
-   Only the chemical composition according to this document is considered.

This document specifies the requirements relating to:
Steel 36NiCrMo16
1 000 MPa ≤ Rm ≤ 1 200 MPa
Bars
100 mm ≤ D ≤ 250 mm
for aerospace applications.

This European Standard specifies the requirements relating to:
Steel X4CrNiMo16-5-1
Air melted
Hardened and tempered
Sheets and plates
0,3 mm ≤ a ≤ 50 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.
ASD-STAN designation: FE-PM 3504.

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Wires
0,25 mm ≤ De ≤ 3 mm
Rm ≤ 780 MPa
for aerospace applications.
Material number: 1.4541.
ASD-STAN designation: FE-PA3601.

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Bars for machining
a or D ≤ 250 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W.nr: 1.4541.
ASD-STAN designation: FE-PA3601.

This document specifies the requirements relating to:
Steel X6CrNiTi18–10 (1.4541)
Air melted
Softened
Sheets and strips
a ≤ 6 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W. Nr: 1.4541.
ASD-STAN designation: FE-PA3601.

This document specifies the requirements relating to:
Steel X2CrNi18-9 (1.4307)
Air melted
Softened
Plates, sheets and strips
0,4 mm ≤ a ≤ 20 mm
520 MPa ≤ Rm ≤ 670 MPa
for aerospace applications.
W. nr: 1.4307.
ASD-STAN designation: FE-PA3901.

This document defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy bars and sections. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

This document specifies the requirements relating to:
Steel X12CrNiMoV12-3 (1.4938)
Air melted and consumable electrode remelted
Hardened and tempered
Bars
De ≤ 150 mm
900 MPa ≤ Rm ≤ 1 100 MPa
for aerospace applications.

This document specifies the requirements relating to:
Heat resisting alloy X4NiCrMoTi43-13
As forged
Forging stock
a or D ≤ 200 mm
for aerospace applications.
ASD-STAN designation: FE-PA2501.

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated
Forgings
De ≤ 100 mm
for aerospace applications.
ASD-STAN Designation: FE-PA4901.

This document specifies the requirements relating to:
Heat resisting alloy FE-PM1708
Vacuum arc remelted
Hardened and tempered
Bars
a or D ≤ 200 mm
1 000 MPa ≤ Rm ≤ 1 140 MPa
for aerospace applications.

This document specifies the requirements relating to:
Heat resisting alloy FE-PM1708
Vacuum arc remelted
As forged
Forging stock
De ≤ 300 mm
for aerospace applications.

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated and precipitation treated
Forgings
De ≤ 100 mm
for aerospace applications.
ASD-STAN designation: FE-PA4901.

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCOMoW21-20
Solution treated and descaled
Sheets and plates
3 mm < a ≤ 50 mm
for aerospace applications.
ASD-STAN designation: FE-PA4901.

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated
Sheets and strips
a ≤ 3 mm
for aerospace applications.
ASD-STAN designation: FE-PA4901.

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated and precipitation treated
Bars and sections
De ≤ 100 mm
for aerospace applications.
ASD-STAN Designation: FE-PA4901.

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated
Bars and sections
De ≤ 100 mm
for aerospace applications.
ASD-STAN Designation: FE-PA4901.

This document specifies the requirements relating to:
Steel X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Forgings
De ≤ 150 mm
for aerospace applications.
ASD-STAN designation: FE-PM66.

This document specifies the requirements relating to:
Steel X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Bars
De ≤ 150 mm
for aerospace applications.
ASD-STAN designation: FE-PM66.

This document specifies the requirements relating to:
Steel 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Forgings
De ≤ 40 mm
for aerospace applications.
ASD-STAN designation: FE-PL73.

This document specifies the requirements relating to:
Steel 30CrNiMo8 (1.6580)
1 100 MPa ≤ Rm ≤ 1 300 MPa
Forgings
De ≤ 100 mm
for aerospace applications.
W.nr: 1.6580
ASD-STAN designation: FE-PL74.

This document specifies the general requirements for the micrographic determination of content of non-metallic inclusions of metallic materials for aerospace applications.
It also gives tables of standard acceptance criteria for particular steel types.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.
This document is mainly applicable to steel but may be used on other metallic materials.
This document is not normally applicable to austenitic corrosion resisting steel, other than precipitation hardening, or to free-machining steel unless invoked in the material standards.

This document specifies the designation rules for metallic semi-finished products given in Table 1, used in aerospace construction.
It is applicable only if referred to in the metallic semi-finished product standard.

This document specifies the requirements relating to:
Steel 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Bars
De ≤ 40 mm
for aerospace applications.
The ASD STAN designation of this material is FE-PL73.

This document specifies the requirements relating to:
Steel 30CrNiMo8 (1.6580)
Air melted
Hardened and tempered
Bar for machining
De ≤ 100 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.

This document specifies the requirements relating to:
Steel 102Cr6 (1.2067)
Hardened and tempered
Bars
for aerospace applications.

This European Standard specifies the requirements relating to:
Steel FE-PL61
Carburized, hardened and tempered
Bar
De ≤ 40 mm
for aerospace applications.

This standard specifies the requirements relating to:
This European Standard specifies the requirements relating to:
Heat resisting
Nickel base alloy Ni-Cr20Co3Fe3
Annealed
Bars
for aerospace applications.