EN ISO 8224-1:2003
(Main)Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods (ISO 8224-1:2003)
Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods (ISO 8224-1:2003)
ISO 8224-1:2002 specifies the operational characteristics of, and laboratory and field test methods for, traveller irrigation machines. It includes user-oriented technical information for presentation in the manufacturer's accompanying product literature, laboratory test procedures for evaluating the uniformity of water application on an irrigated strip by a machine operating within a specified range of conditions and for determining the maximum travelling rates the drive mechanism is able to achieve in response to specified operating conditions, and field test procedures for determining the uniformity of water application on a given irrigated strip under local conditions prevailing in the field at time of testing.
It is applicable only to traveller irrigation machine types, and not to other types such as centre-pivot or lateral irrigation machines.
Mobile Beregnungsmaschinen - Teil 1: Betriebskennwerte, Prüfverfahren für Labor- und Felduntersuchungen (ISO 8224-1:2003)
Der Teil von ISO 8224 legt sowohl die Betriebskennwerte als auch die Prüfverfahren für Labor- und Feldprüfungen für Beregnungsmaschinen fest.
Er enthält
Festlegungen für die anwenderorientierte Angabe technischer Informationen für die Veröffentlichung des Herstellers zum Produkt;
Prüfverfahren für Laborprüfungen zur Beurteilung der Gleichförmigkeit der Wasserverteilung, die sich auf einem gegebenen Beregnungsstreifen und innerhalb eines festgelegten Parameterbereiches beim Betrieb der mobilen Beregnungsmaschine ergibt und zur Bestimmung der Höchstwerte der Geschwindigkeit, die der Antriebsmechanismus unter festgelegten Betriebsbedingungen zu erreichen vermag;
Prüfverfahren für Feldprüfungen zur Bestimmung der Gleichförmigkeit der Wasserverteilung, die sich auf einem gegebenen Beregnungsstreifen unter den zum Zeitpunkt einer Prüfung vorherrschenden örtlichen Bedingungen ergibt.
Er gilt nur für mobile Beregnungsmaschinen und nicht für sonstige Arten von Beregnungsmaschinen, wie z. B. Kreis-und Linearberegnungsmaschinen.
Machines d'arrosage mobiles - Partie 1: Caractéristiques opérationnelles et méthodes d'essai en laboratoire et au champ (ISO 8224-1:2003)
L'ISO 8224-1:2004 spécifie les caractéristiques de fonctionnement des machines d'irrigation mobiles ainsi que les méthodes d'essai de ces machines en laboratoire et au champ. Elle comporte les informations destinées aux utilisateurs à inclure dans une documentation du produit élaborée par le fabricant; les modes opératoires d'essai en laboratoire visant à évaluer l'uniformité des apports d'eau sur une bande irriguée par une machine fonctionnant dans une gamme de conditions spécifiée et à déterminer les vitesses de déplacement maximales que le moteur d'entraînement est capable d'atteindre en réaction à des conditions de fonctionnement spécifiées; et les modes opératoires d'essai au champ visant à déterminer l'uniformité des apports d'eau sur une bande irriguée donnée, dans les conditions locales régnant dans le champ au moment des essais.
Elle est applicable uniquement aux machines d'irrigation mobiles et pas aux autres types de machines d'irrigation, telles que les machines d'irrigation de type pivot et les rampes frontales.
Prevozni namakalni stroji - 1. del: Obratovalne lastnosti in metode laboratorijskih in terenskih preskusov (ISO 8224-1:2003)
Ta del standarda ISO 8224 določa obratovalne lastnosti in metode laboratorijskih in terenskih preskusov za prevozne namakalne stroje. Standard zajema:
– tehnične informacije, namenjene uporabnikom, za vključitev v proizvajalčevo dokumentacijo o izdelku,
– laboratorijske preskusne postopke za določanje enakomernosti porazdelitve vode na namakalnem pasu s strojem, ki deluje v okviru določenih pogojev, in za določanje najvišjih hitrosti pogonskega stroja glede na določene delovne pogoje ter
– postopke terenskih preskusov za določanje enakomernosti porazdelitve vode na danem namakalnem pasu v okviru določenih pogojev, ki prevladujejo na namakalnem pasu v času preskušanja. Velja samo za prevozne namakalne stroje in ne za druge vrste namakalnih naprav, kot so vrtljivi in bočni namakalni stroji.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prevozni namakalni stroji - 1. del: Obratovalne lastnosti in metode laboratorijskih in terenskih preskusov (ISO 8224-1:2003)Mobile Beregnungsmaschinen - Teil 1: Betriebskennwerte, Prüfverfahren für Labor- und Felduntersuchungen (ISO 8224-1:2003)Machines d'arrosage mobiles - Partie 1: Caractéristiques opérationnelles et méthodes d'essai en laboratoire et au champ (ISO 8224-1:2003)Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods (ISO 8224-1:2003)65.060.35Namakalna in drenažna opremaIrrigation and drainage equipmentICS:Ta slovenski standard je istoveten z:EN ISO 8224-1:2003SIST EN ISO 8224-1:2004en01-januar-2004SIST EN ISO 8224-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8224-1February 2003ICS 65.060.35English versionTraveller irrigation machines - Part 1: Operational characteristicsand laboratory and field test methods (ISO 8224-1:2003)Machines d'arrosage mobiles - Partie 1: Caractéristiquesopérationnelles et méthodes d'essai en laboratoire et auchamp (ISO 8224-1:2003)Mobile Beregnungsmaschinen - Teil 1: Betriebskennwerte,Prüfverfahren für Labor- und Felduntersuchungen (ISO8224-1:2003)This European Standard was approved by CEN on 18 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8224-1:2003 ESIST EN ISO 8224-1:2004
2003-03-19ForewordThis document (EN ISO 8224-1:2003) has been prepared by Technical Committee ISO/TC 23"Tractors and machinery for agriculture and forestry" in collaboration with Technical CommitteeCEN/TC 334 "Irrigation techniques", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by August 2003, and conflicting national standards shallbe withdrawn at the latest by August 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of ISO 8224-1:2003 has been approved by CEN as EN ISO 8224-1:2003 without anymodifications.NOTE
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 8224-1:2004
Reference numberISO 8224-1:2003(E)© ISO 2003
INTERNATIONAL STANDARD ISO8224-1Second edition2003-02-01Corrected version2004-02-15Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods Machines d'irrigation mobiles — Partie 1: Caractéristiques de fonctionnement et méthodes d'essai en laboratoire et au champ
ISO 8224-1:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2003 — All rights reserved
ISO 8224-1:2003(E) © ISO 2003 — All rights reserved iii Contents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Terms, definitions and symbols.1 4 Functional aspects and technical information.8 5 Test specifications.8 5.1 General.8 5.2 Test liquid.8 5.3 Calculation of field resistance coefficient.9 5.4 Sampling and general preparation of test traveller irrigation machine.10 5.5 Specific machines.10 6 Laboratory uniformity tests.10 6.1 General.10 6.2 Test conditions.11 6.3 Apparatus.14 6.4 Required pre-test data.17 6.5 Procedure.18 6.6 Processing laboratory uniformity test data.20 6.7 Presentation of results.22 7 Laboratory drive tests.27 7.1 General.27 7.2 Laboratory drive test equipment.27 7.3 Laboratory drive test conditions.27 7.4 Laboratory drive test procedure.28 7.5 Laboratory drive test results.28 8 Field uniformity tests.28 8.1 General.28 8.2 Apparatus.29 8.3 Field uniformity test procedure.30 8.4 Field uniformity test data processing and results.32 8.5 Graphs of field uniformity test results.36
ISO 8224-1:2003(E) iv © ISO 2003 — All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8224-1 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 18, Irrigation and drainage equipment and systems. This second edition cancels and replaces the first edition (ISO 8224-1:1985), which has been technically revised. ISO 8224 consists of the following parts, under the general title Traveller irrigation machines: =Part 1: Operational characteristics and laboratory and field test methods =Part 2: Softwall hose and couplings — Test methods This corrected version of ISO 8824-1:2003 incorporates the following corrections. The French title has been corrected. A redundant reference to the three travelling rate settings has been deleted from 6.2.2 b). Cross-references have been corrected. A typographical error in the title of Figure 6 has been corrected. The y-axis legend fo Figure 7 d) has been corrected to indicate travel speed. The arrows indicating pressure and flow rate in Figure 7 e) now correspond to the appropriate longitudinal variations shown on the graph. The reference to the role of the third pressure gauge in 8.2.4 has been clarified. In 8.4.3.1 d), the explanation of the ratio has been given its true sense. The same has been done in respect of the different ratio mentioned in 8.4.3.2.
INTERNATIONAL STANDARD ISO 8224-1:2003(E) © ISO 2003 — All rights reserved 1 Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods 1 Scope This part of ISO 8224 specifies the operational characteristics of, and laboratory and field test methods for, traveller irrigation machines. It includes =user-oriented technical information for inclusion in the manufacturer’s accompanying product literature, =laboratory test procedures for evaluating the uniformity of water application on an irrigated strip by a machine operating within a specified range of conditions and for determining the maximum travelling rates the drive mechanism is able to achieve in response to specified operating conditions, and =field test procedures for determining the uniformity of water application on a given irrigated strip under local conditions prevailing in the field at time of testing. It is applicable only to traveller irrigation machines and not to other types of irrigation machine s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.