FprEN 13813

Screed material and floor screeds - Screed material - Properties and requirements

This document specifies requirements for the following types of screed material as defined in EN 13318:
-   cementitious;
-   calcium sulfate;
-   magnesite;
-   mastic asphalt;
-   synthetic resin.
All types of screed material can be used for internal applications. However, cementitious screed materials can also be used for internal and external applications.
This document specifies the properties for fresh and hardened screed materials.
The floor screed materials could be installed as monolayer or multilayer products.
This document specifies designation of the screed materials as well as designation and classification of their characteristics. Furthermore, it also specifies the assessment and verification of constancy of performance, marking and labelling of the screed materials.
This document does not provide criteria or recommendations for the design and installation of screed materials.

Estrichmörtel, Estrichmassen und Estriche - Estrichmörtel und Estrichmassen - Eigenschaften und Anforderungen

Diese Europäische Norm legt Anforderungen an folgende Arten von Estrichmörtel fest, wie in EN 13318 definiert:
-   Zement;
-   Calciumsulfat;
-   Magnesit;
-   Gussasphalt;
-   Synthetisches Reaktionsharz.
Alle Arten Estrichmörtel dürfen innen angewendet werden.
Zementestrichmörtel darf sowohl innen als auch außen angewendet werden.
Diese Europäische Norm legt die Leistung für frischen und nicht erhärteten Estrichmörtel fest.
Estrichmörtel kann einzelschichtig oder mehrschichtig sein.
Diese Europäische Norm legt die Bewertung und Überprüfung der Konstanz der Leistung und die Klassifizierung und Bezeichnung von Estrichmörtel fest.
Diese Europäische Norm gibt keine Kriterien oder Empfehlungen für die Gestaltung und den Einbau von Estrichmörtel an.

Matériau de chape et chapes - Matériau de chapes - Propriétés et exigences

La présente Norme européenne spécifie les exigences relatives aux types de matériaux pour chape suivants, définis dans l'EN 13318 :
-   à base de ciment ;
-   à base de sulfate de calcium ;
-   à base de magnésie ;
-   en asphalte coulé ;
-   à base de résine synthétique.
Tous les types de matériau pour chape peuvent être utilisés pour des applications en intérieur.
Les matériaux pour chape à base de ciment peuvent être utilisés tant pour les applications en intérieur que pour les applications en extérieur.
La présente Norme européenne spécifie les performances des matériaux pour chape frais et durcis.
Les matériaux pour chape peuvent être monocouches ou multicouches.
La présente Norme européenne spécifie l'évaluation et la vérification de la constance des performances, ainsi que la classification et la désignation des matériaux pour chape.
La présente Norme européenne ne fournit pas de critères ni de recommandations en matière de conception et d'installation des matériaux pour chape.

Estrihi - Materiali za estrihe - Lastnosti in zahteve

General Information

• Status: Not Published
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 303 - Floor screeds and in-situ floorings in buildings
• Drafting Committee: CEN/TC 303/WG 1 - General
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Mandate: M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
• Ref Project: kSIST prEN 13813:2018 - Screed material and floor screeds - Screed material - Properties and requirements

Relations

• Revises: EN 13813:2002 - Screed material and floor screeds - Screed material - Properties and requirements
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13813:2017
01-marec-2017
Estrihi - Materiali za estrihe - Lastnosti in zahteve
Screed material and floor screeds - Screed material - Properties and requirements
Estrichmörtel, Estrichmassen und Estriche - Estrichmörtel und Estrichmassen -
Eigenschaften und Anforderungen
Matériau de chape et chapes - Matériau de chapes - Propriétés et exigences
Ta slovenski standard je istoveten z: prEN 13813
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
oSIST prEN 13813:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13813:2017

---------------------- Page: 2 ----------------------
oSIST prEN 13813:2017


DRAFT
EUROPEAN STANDARD
prEN 13813
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2017
ICS 91.100.10 Will supersede EN 13813:2002
English Version

Screed material and floor screeds - Screed material -
Properties and requirements
Matériau de chape et chapes - Matériau de chapes - Estrichmörtel, Estrichmassen und Estriche -
Propriétés et exigences Estrichmörtel und Estrichmassen - Eigenschaften und
Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 303.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13813:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13813:2017
prEN 13813:2017 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Designation of screed materials and characteristics . 8
5 Product characteristics . 8
5.1 General . 8
5.2 Characteristics related to mechanical resistance . 11
5.3 Reaction to fire . 14
5.3.1 General . 14
5.3.2 Screed materials classified as Class A1 without the need
...