prEN 4800-001

Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy plate, sheet and strip. It is applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil 001: Platten, Bleche und Bänder

Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 001: Plaques, tôles et bandes

Le présent document spécifie les exigences relatives aux commandes, à la fabrication, aux essais, au contrôle et à la livraison des plaques, tôles et bandes en titane et alliages de titane. Il doit être appliqué lorsqu'il est cité en référence et conjointement avec la norme de matériau EN, sauf spécification contraire figurant sur le dessin, la commande ou la fiche d'essais.

Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 001. del: Plošče, pločevina in trakovi

General Information

• Status: Not Published
• Publication Date: 15-Jun-2025
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 1 - Aluminium
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 07-Mar-2024
• Completion Date: 07-Mar-2024
• Ref Project: oSIST prEN 4800-001:2024 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip

Relations

• Revises: EN 4800-001:2010 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
• Effective Date: 05-Jul-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4800-001:2024
01-maj-2024
Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 001. del: Plošče,
pločevina in trakovi
Aerospace series - Titanium and titanium alloys - Technical specification - Part 001:
Plate, sheet and strip
Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil
001: Platten, Bleche und Bänder
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 001:
Plaques, tôles et bandes
Ta slovenski standard je istoveten z: prEN 4800-001
ICS:
49.025.30 Titan Titanium
oSIST prEN 4800-001:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4800-001:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4800-001:2024


DRAFT
EUROPEAN STANDARD
prEN 4800-001
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2023
ICS 49.025.30 Will supersede EN 4800-001:2010
English Version

Aerospace series - Titanium and titanium alloys -
Technical specification - Part 001: Plate, sheet and strip
Série aérospatiale - Titane et alliages de titane - Luft- und Raumfahrt - Titan und Titanlegierungen -
Spécification technique - Partie 001: Plaques, tôles et Technische Lieferbedingungen - Teil 001: Platten,
bandes Bleche und Bänder
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4800-001:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4800-001:2024
prEN 4800-001:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Wording of order . 7
5 Health and safety . 7
6 Technical requirements . 7
6.1 General. 7
6.2 Qualification requirements .
...