EN 14342:2005

Wood flooring - Characteristics, evaluation of conformity and marking

This document defines and specifies for wood and parquet flooring the relevant characteristics and the appropriate test methods to determine these characteristics for internal use as flooring. It also applies to wood veneer floor coverings.
This document covers flooring defined in EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, prEN 14761 and EN 14354. It does not specify dimensional limits or tolerances, which are given by these same standards.
It provides for the evaluation of conformity and the requirements for marking these products.
This document does not apply to products sold as tactile surfaces or to aid visibility, e.g. products sold with tactile or visible strip applied.

Parkett und Holzfußböden - Eigenschaften, Bewertung der Konformität und Kennzeichnung

Dieses Dokument legt die wesentlichen Eigenschaften von Holzfußböden und Parkett sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften für die Verwendung als Fußboden in Innenräumen fest. Es gilt auch für furnierte Fußbodenbeläge.
Dieses Dokument gilt für Fußböden nach EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, prEN 14761 und prEN 14354. Es legt keine Maße oder Toleranzen fest. Diese sind in den genannten Normen angegeben.
Es beschreibt die Bewertung der Konformität dieser Erzeugnisse und die Anforderungen an ihre Kennzeichnung.
Dieses Dokument gilt nicht für Erzeugnisse mit tastbarer Oberfläche oder zur Verbesserung der Sichtbarkeit, z. B. Erzeugnisse mit Taststreifen oder Leuchtstreifen.

Planchers et parquets en bois - Caractéristiques, évaluation de conformité et marquage

Le présent document définit et spécifie les caractéristiques pertinentes ainsi que les méthodes d'essai appropriées pour les planchers et parquets en bois, afin de déterminer lesdites caractéristiques pour une utilisation intérieure en qualité de revêtement de sol. Elle s'applique également aux revêtements de sol à placage bois.
La présente norme couvre les planchers définis dans les normes EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629 et EN 14354. Elle ne précise pas les limites dimensionnelles ni les tolérances qui sont données dans ces normes.
Elle traite de l'évaluation de la conformité et des exigences concernant le marquage de ces produits.
La présente norme ne s'applique pas aux produits vendus comme surfaces tactiles ou pour aider à la visibilité, par exemple des produits vendus avec bande tactile ou visible.

Lesene talne obloge - Lastnosti, ovrednotenje skladnosti in označevanje

General Information

• Status: Withdrawn
• Publication Date: 17-May-2005
• Withdrawal Date: 27-May-2008
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175 - Round and sawn timber
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-May-2008
• Completion Date: 28-May-2008
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: SIST EN 14342:2005 - Wood flooring - Characteristics, evaluation of conformity and marking

Relations

• Merged Into: EN 14342:2005+A1:2008 - Wood flooring - Characteristics, evaluation of conformity and marking
• Effective Date: 22-Dec-2008
• Amended By: EN 14342:2005/prA1 - Wood flooring - Characteristics, evaluation of conformity and marking
• Effective Date: 22-Dec-2008
• Corrected By: EN 14342:2005/AC:2007 - Wood flooring - Characteristics, evaluation of conformity and marking
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYDQMHParkett und Holzfußböden - Eigenschaften, Bewertung der Konformität und KennzeichnungPlanchers et parquets en bois - Caractéristiques, évaluation de conformité et marquageWood flooring - Characteristics, evaluation of conformity and marking97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 14342:2005SIST EN 14342:2005en01-september-2005SIST EN 14342:2005SLOVENSKI
STANDARD



SIST EN 14342:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14342May 2005ICS 79.080English versionWood flooring - Characteristics, evaluation of conformity andmarkingPlanchers et parquets en bois - Caractéristiques,évaluation de conformité et marquageParkett und Holzfußböden - Eigenschaften, Bewertung derKonformität und KennzeichnungThis European Standard was approved by CEN on 8 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14342:2005: ESIST EN 14342:2005



EN 14342:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Performance characteristics required for wood and parquet flooring.5 5 Determination of the performance characteristics.6 6 Evaluation of conformity.9 7 Marking.11 Annex A (informative)
General considerations regarding durability of wood.13 Annex B (normative)
Formaldehyde classes.14 Annex C (informative)
Classes of reaction to fire performance for construction products for flooring including their surface coverings (OJEC I50/18 23.2.2000).17 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.18 Bibliography.24
SIST EN 14342:2005



EN 14342:2005 (E) 3 Foreword This document (EN 14342:2005) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn at the latest by November 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106. For relationship with EU Directive(s), see informati
...