EN 14342:2005+A1:2008

Wood flooring - Characteristics, evaluation of conformity and marking

This document defines and specifies for wood and parquet flooring the relevant characteristics and the appropriate test methods to determine these characteristics for internal use as flooring. It also applies to wood veneer floor coverings.
This document covers flooring defined in EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, prEN 14761 and EN 14354. It does not specify dimensional limits or tolerances, which are given by these same standards.
It provides for the evaluation of conformity and the requirements for marking these products.
This document does not apply to products sold as tactile surfaces or to aid visibility, e.g. products sold with tactile or visible strip applied.

Parkett und Holzfußböden - Eigenschaften, Bewertung der Konformität und Kennzeichnung

Diese Europäische Norm definiert und legt für Produkte für Parkett und Holzfußböden die betreffenden
Eigenschaften, Anforderungen und entsprechenden Prüfverfahren zur Bestimmung dieser Eigenschaften fest,
wenn diese im Innenbereich einschließlich abgeschlossener öffentlicher Verkehrsflächen zur Anwendung
kommen." Es gilt auch für furnierte Fußbodenbeläge.
Dieses Dokument gilt für Fußböden nach EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990,
EN 13629, !EN 14761" und EN 14354. Es legt keine Maße oder Toleranzen fest. Diese sind in den genannten
Normen angegeben.
!Diese Europäische Norm dient auch als Grundlage für die Bewertung der Konformität und der Anforderungen
an die Kennzeichnung dieser Produkte."
!Dieses Dokument bezieht auch die Produkte für Parkett und Holzfußböden mit ein, die behandelt werden
dürfen, um deren Brandverhalten zu verbessern."
!Diese Europäische Norm gilt nicht für Produkte für Parkett und Holzfußböden mit fühlbaren Oberflächen
oder zur Verbesserung der Sichtbarkeit, d. h. für Produkte mit Auffangstreifen oder Sichtstreifen."

Planchers et parquets en bois - Caractéristiques, évaluation de conformité et marquage

!La présente Norme européenne définit et spécifie les caractéristiques pertinentes ainsi que les méthodes d’essais appropriées pour produits ou éléments de planchers et de parquets en bois afin de déterminer lesdites caractéristiques pour une utilisation intérieure incluant les locaux de transport public." Elle s’applique également aux revêtements de sol à placage bois.
La présente norme couvre les planchers définis dans les normes EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, !EN 14761" et EN 14354. Elle ne précise pas les limites dimensionnelles ni les tolérances qui sont données dans ces normes.
!La présente Norme européenne traite également de l’évaluation de conformité et des exigences concernant le marquage de ces produits."
!Le présent document traite également des produits ou éléments de planchers et de parquets en bois qui peuvent être traités afin d’améliorer leur performance de réaction au feu."
!La présente Norme européenne ne s’applique pas aux produits ou éléments de planchers et de parquets en bois ayant des surfaces tactiles ou aidant à la visibilité, par exemple des produits ayant des bandes tactiles ou visibles."

Lesene talne obloge - Lastnosti, ovrednotenje skladnosti in označevanje

General Information

• Status: Withdrawn
• Publication Date: 27-May-2008
• Withdrawal Date: 09-Jul-2013
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 33 - Specific user requirements - Timber in flooring
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Jul-2013
• Completion Date: 10-Jul-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: SIST EN 14342:2005+A1:2008 - Wood flooring - Characteristics, evaluation of conformity and marking

Relations

• Merged From: EN 14342:2005/AC:2007 - Wood flooring - Characteristics, evaluation of conformity and marking
• Effective Date: 19-Jan-2023
• Merged From: EN 14342:2005 - Wood flooring - Characteristics, evaluation of conformity and marking
• Effective Date: 22-Dec-2008
• Merged From: EN 14342:2005/prA1 - Wood flooring - Characteristics, evaluation of conformity and marking
• Effective Date: 22-Dec-2008
• Replaced By: EN 14342:2013 - Wood flooring and parquet - Characteristics, evaluation of conformity and marking
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYDQMHParkett und Holzfußböden - Eigenschaften, Bewertung der Konformität und KennzeichnungPlanchers et parquets en bois - Caractéristiques, évaluation de conformité et marquageWood flooring - Characteristics, evaluation of conformity and marking97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 14342:2005+A1:2008SIST EN 14342:2005+A1:2008en,fr,de01-oktober-2008SIST EN 14342:2005+A1:2008SLOVENSKI
STANDARDSIST EN 14342:2005/oprA1:2008SIST EN 14342:2005/AC:2008SIST EN 14342:20051DGRPHãþD



SIST EN 14342:2005+A1:2008



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14342:2005+A1
May 2008 ICS 79.080 Supersedes EN 14342:2005 English Version
Wood flooring - Characteristics, evaluation of conformity and marking
Planchers et parquets en bois - Caractéristiques, évaluation de conformité et marquage
Parkett und Holzfußböden - Eigenschaften, Bewertung der Konformität und Kennzeichnung This European Standard was approved by CEN on 8 August 2004 and includes Amendment 1 approved by CEN on 12 April 2008 and the Corrigendum issued by CEN on 25 July 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14342:2005+A1:2008: ESIST EN 14342:2005+A1:2008



EN 14342:2005+A1:2008 (E) 2 Contents Page Foreword.3 1 Scope.3 2 Normative references.4 3 Terms and definitions.5 4 Performance characteristics required for wood and parquet flooring !!!!products"""".5 5 !!!!Determination and declaration
of the performance characteristics"""".6 6 Evaluation of conformity.9 7 Marking.12 Annex A (normative)
Formaldehyde classes.14 Annex ZA (informative)
!!!!Clauses of this European Standard addressing the provisions of the EU Construction Products Directive"""".18 Bibliography.27
SIST EN 14342:2005+A1:2008



EN 14342:2005+A1:2008 (E) 3 Foreword This document (EN 14342:2005+A1:2008) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn at the latest by February 2010. This document supersedes EN 14342:2005. This document includes Amendment 1, approved by CEN on 2008-04-12 and the Corrigendum issued on 2007-07-25. The start and finish of text introduced or altered by amend
...