79.080 - Semi-manufactures of timber
ICS 79.080 Details
Semi-manufactures of timber
Holzhalbzeuge
Bois semi-manufacturés
Polizdelki iz lesa
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 79.080 - Semi-manufactures of timber
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This European Standard specifies the characteristics of multi-layer parquet elements for internal use as flooring.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the manufacturing characteristics, the dimensions, the tolerances, the methods for quality control and delivery conditions, the measurement and the marking of hardwood and softwood raw parquet elements. NOTE The classification of raw parquet elements according to specific characteristics and wood defects are specified, for the different species of wood, in the relevant International Standards such as ISO 4561. This document applies to raw parquet elements intended for the manufacture of strips for different types of parquet flooring.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document establishes the classification, by quality, of non-assembled solid parquet strips of the following wood species: — oak (Quercus sp.), — hickory (Carya sp.), — beech (Fagus sylvatica sp.), — birch (Betula sp.), — maple (Acer sp.), — fir (Abies sp.), — spruce (Picea sp.), and — maritime pine (Pinus pinaster sp.).
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document establishes the classification, by quality, of raw parquet elements intended for the manufacture of strips for different types of parquet floorings of the following wood species: — oak (Quercus sp.), — beech (Fagus sylvatica sp.), — birch (Betula sp.), — maple (Acer sp.), — fir (Abies sp.), and — spruce (Picea sp.).
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies the characteristics, requirements and test methods of multi-layer parquet elements for internal use as flooring.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method to determine the resistance of the surface of an element of wood flooring, panelling and cladding, to a predetermined list of chemical agents they may be exposed to during their service life.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method to determine the resistance of the surface of an element of wood flooring, panelling and cladding, to a predetermined list of chemical agents they may be exposed to during their service life.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document is intended to facilitate the interpretation and use of the European Standards where the testing and specification of wood preservative products are described. It aims to assist users (manufacturers, specifiers, authorities, etc.) to correlate the choice of selected test methods, wood substrates and biological agents with the efficacy requirements of wood preservatives based on their claimed target organisms and end use. This document is a source of supplementary information to the relevant standards and cannot be used as a standalone document.
- Technical report18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods of measuring the geometrical characteristics of wood flooring and wood panelling and cladding elements.
This document does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method to determine the top layer delamination of multilayer parquet elements according to EN 13489 with different structures, dimensions and adhesives for internal use as flooring, at the time of the first delivery of the product.
The document specifies a test method with three aging-treatments (AT1, AT2 and AT3) of the test specimens.
The test method described in this document allows to determine a top layer bonding quality, also for parquet used on floor heating, and for the identification of bonding failure.
NOTE 1 For bottom layer of three layers elements the test method is applicable even if the experience is limited.
AT1 is a suitable treatment for the prognosis of multilayer parquets under dry indoor conditions and can be applied for all type of glues of parquets. It can be used for main underfloor heating systems.
AT2 is a suitable treatment for the assessment of multilayer parquets with PVAc-glues for top layer bonding.
AT3 is a suitable treatment for the assessment of multilayer parquets with different type of glues other than PVA-c for top layer bonding.
This document does not apply to the bonding quality of plywood if it is in use in the multilayer parquet construction.
NOTE 2 This document does not allow to estimate the compatibility of use in wet conditions.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods of measuring the geometrical characteristics of wood flooring and wood panelling and cladding elements.
This document does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method to determine the top layer delamination of multilayer parquet elements according to EN 13489 with different structures, dimensions and adhesives for internal use as flooring, at the time of the first delivery of the product.
The document specifies 2 pre-treatments (PT1 and PT2) of the test specimens.
The test methods described in this document allow to determine the minimum top layer bonding quality, also for the use application on floor heating, and for the identification of bonding failure.
NOTE 1 For this application, the pre-treatments have proven to be suitable.
This document does not apply to the bonding quality of plywood if it is in use in the multilayer parquet construction.
NOTE 2 This standard doesn’t allow to estimate the compatibility of use in wet conditions.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the characteristics of individual hardwood boards and pre-assembled hardwood boards with grooves and/or tongues for internal use as flooring. This document covers hardwood boards with or without surface coating.
This document does not cover solid parquet elements. (See Annex C).
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method, derived from the test, for determining the resistance to indentation of wood flooring.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the characteristics of individual hardwood boards and pre-assembled hardwood boards with grooves and/or tongues for internal use as flooring. This document covers hardwood boards with or without surface coating.
This document does not cover solid parquet elements. (See Annex C).
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method, derived from the test, for determining the resistance to indentation of wood flooring.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for solid wood products to be used as panelling and cladding (including siding) for:
- wall and ceiling panelling for internal use,
- wall and ceiling cladding for external uses.
It provides for the assessment and verification of constancy of performance and the requirements for marking these products.
This European Standard does not cover panels intended for use as stiffening elements.
This European Standard does not cover suspended ceiling in wood panelling and cladding.
This European Standard does not cover the processes for treatment, surface coating or modification.
This European standard does not cover products which are produced from laminated layer section.
This European Standard covers treated, untreated and surface coated products, including those made of thermally or chemically modified wood, as well as finger jointed and edge glued products.
NOTE Prescriptions for surface coating and treatment can be found in documents valid in the place of use.
This European Standard covers products in compliance with EN 14519, EN 15146 and EN 14951, and other solid timber products manufactured for use as panelling and cladding.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for solid wood products to be used as panelling and cladding (including siding) for:
- wall and ceiling panelling for internal use,
- wall and ceiling cladding for external uses.
It provides for the assessment and verification of constancy of performance and the requirements for marking these products.
This European Standard does not cover panels intended for use as stiffening elements.
This European Standard does not cover suspended ceiling in wood panelling and cladding.
This European Standard does not cover the processes for treatment, surface coating or modification.
This European standard does not cover products which are produced from laminated layer section.
This European Standard covers treated, untreated and surface coated products, including those made of thermally or chemically modified wood, as well as finger jointed and edge glued products.
NOTE Prescriptions for surface coating and treatment can be found in documents valid in the place of use.
This European Standard covers products in compliance with EN 14519, EN 15146 and EN 14951, and other solid timber products manufactured for use as panelling and cladding.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives test methods to determine the dimensional variance between elements of laminate floor coverings in a manufactured free-standing shape (unrestricted) in respect of thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements. NOTE These test methods are also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
This document establishes terms and definitions for expressing as correctly as possible concepts relating to wood flooring, parquet and raw parquet blocks. This document aims to clarify terms and definition of wood floorings and parquet and avoid any confusion with other types of floorings.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document defines terms and their definitions relating to wood flooring and parquet.
- Standard76 pagesEnglish, French and German languagesale 10% offe-Library read for1 day
This European Standard specifies a method for determining the water uptake and the effectiveness of the drying process of solid wood, wood based materials or coated wood by means of water absorption and water vapour desorption. This European Standard lays down a method to assess the moisture dynamics of wooden products and indirectly their susceptibility to wood rot.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines terms and their definitions relating to wood flooring.
- Standard76 pagesEnglish, French and German languagesale 10% offe-Library read for1 day
This document details a method for determining the water uptake and the effectiveness of the drying process on solid wood, wood-based materials or coated wood by means of water absorption and water vapour desorption. This document lays down a method to assess the moisture dynamics of wooden products which can be a contributing factor to the susceptibility to wood decay.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification specifies mechanical and optical test methods for the determination of particle size of lignocellulosic material for use in wood plastic composites (WPC) and natural fibre composites (NFC).
- Technical specification10 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies test methods for the determination of properties of composites made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
NOTE For editorial reasons, in EN 15534 the abbreviation "WPC" is used for ecomposites made from cellulose-based materials and thermoplastics.
This part of EN 15534 is applicable to cellular or non-cellular compounds and products, made from cellulose-based materials and thermoplastics, intended to be or being processed through plastics processing techniques, without threshold for the cellulose-based material content.
All the properties listed in this part of EN 15534 are not necessarily assessed for a given application. Test parameters and requirements of the test methods for a given application are specified in the relevant part of EN 15534.
Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles for guttering are not covered by EN 15534).
- Standard59 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics of solid lamparquet products for internal use as flooring. It applies to elements. This European Standard does not apply to panels made from elements, for which EN 13810 1 applies.
This European Standard covers products without surface treatment.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies mechanical and optical test methods for the determination of particle size of lignocellulosic material for use in wood plastic composites (WPC) and natural fibre composites (NFC).
- Technical specification10 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines terms and specifies requirements and test methods for wood veneer floor coverings with multilayer built up for internal use. It gives guidance for the evaluation of conformity of the products to the requirements of this standard.
This European Standard is not applicable to multilayer parquet elements with a minimum top layer thickness of 2,5 mm. For these products EN 13489 applies.
- Standard49 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies test methods for the determination of properties of composites made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
NOTE For editorial reasons, in EN 15534 the abbreviation "WPC" is used for ecomposites made from cellulose-based materials and thermoplastics.
This part of EN 15534 is applicable to cellular or non-cellular compounds and products, made from cellulose-based materials and thermoplastics, intended to be or being processed through plastics processing techniques, without threshold for the cellulose-based material content.
All the properties listed in this part of EN 15534 are not necessarily assessed for a given application. Test parameters and requirements of the test methods for a given application are specified in the relevant part of EN 15534.
Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles for guttering are not covered by EN 15534).
- Standard59 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 15534 specifies the characteristics of fencing profiles and elements made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
It is applicable to fencing profiles and elements for non-structural fencing systems.
The security systems, perimeter protections, handrails and load bearing applications are out of the scope of this part of EN 15534.
Any systems made from profiles in the scope of this part of EN 15534 that are affected by regulations are under the responsibility of the system supplier.
EN 15534 1 specifies some of the test methods relevant to this part of EN 15534.
NOTE For editorial reasons, in EN 15534 the abbreviation "WPC" is used for "composites made from cellulose-based materials and thermoplastics".
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics of solid lamparquet products for internal use as flooring. It applies to elements. This European Standard does not apply to panels made from elements, for which the EN 13810-1 applies.
This European Standard covers products without surface treatment.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies definitions, requirements and test methods for wood veneer floor coverings for internal use. It gives guidance for the evaluation of conformity of the products to the requirements of this standard. Wood-veneer floor coverings without finishing are excluded.
- Standard49 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 15534 specifies the characteristics of fencing profiles and elements made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
It is applicable to fencing profiles and elements for non-structural fencing systems.
The security systems, perimeter protections, handrails and load bearing applications are out of the scope of this part of EN 15534.
Any systems made from profiles in the scope of this part of EN 15534 that are affected by regulations are under the responsibility of the system supplier.
EN 15534 1 specifies some of the test methods relevant to this part of EN 15534.
NOTE For editorial reasons, in EN 15534 the abbreviation "WPC" is used for "composites made from cellulose-based materials and thermoplastics".
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method of test to determine the dimensional changes and warp of the elements of wood flooring and wood panelling and cladding.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method of test to determine the dimensional changes and warp of the elements of wood flooring and wood panelling and cladding.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
The scope of WG28 Performance Classification is expressed in this Technical Report:
Guidance on the determination of end use performance of wood products: utilization and improvement of existing test methods to estimate service life, in order to give input to the harmonized product standards dealing with the durability requirement of the CPD and future Regulation (EU) No 305/2011 (The Construction Products Regulation CPR).
This Technical Report brings together the evaluations and discussions to date that have occurred within CEN/TC38/WG28 Performance Classification.
This technical report does not address panel products specifically.
- Technical report35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics of cladding profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external or internal use.
This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding.
It is not applicable to support rail profiles, cover strip profiles and fastener devices which are out of the scope of this part of EN 15534.
EN 15534 1 specifies the test methods relevant to this part of EN 15534.
NOTE For editorial reasons, in EN 15534 the abbreviation "WPC" is used for "composites made from cellulose-based materials and thermoplastics".
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
EN 15534-5 specifies the characteristics of cladding profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external or internal use. This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding. It is not applicable to support rail profiles, cover strip profiles and fastener devices which are out of the scope of this part of EN 15534. EN 15534-1 specifies the test methods relevant to this part of EN 15534.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
EN 15534-4 specifies the characteristics of decking profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external use. This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding. It is not applicable to kits (i.e. support rail profiles, cover strip profiles and hardware) which are out of the scope of this part of EN 15534. EN 15534-1 specifies the test methods relevant to this part of EN 15534.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines and specifies the relevant characteristics and requirements of flat surface wood flooring products and parquets as well as the appropriate test methods for determination of their suitability for use as internal flooring, including fully enclosed public transport premises.
The European Standards for specific wood flooring products and parquets to which this European Standard relates, and which provide product definitions and requirements for dimensional tolerances, include the following:
- solid parquet elements with tongues and grooves (EN 13226);
- solid lamparquet products (EN 13227);
- solid wood overlay elements including blocks with an interlocking system (EN 13228);
- mosaic parquet elements (EN 13488);
- multi-layer parquet elements (EN 13489);
- solid pre-assembled hardwood board (EN 13629);
- solid softwood floor boards (EN 13990);
- wood veneer floor coverings (EN 14354);
- solid wood parquet — vertical finger, wide finger and module brick (EN 14761).
This European Standard may also apply to other wood flooring products and parquets than those standards above. However, it does not specify any requirements for dimensional limits of tolerances of such products.
This European Standard provides also for the evaluation of conformity and the requirements for marking the wood flooring products and parquets.
This European Standard covers wood flooring products and parquets which may or may not be treated to improve their reaction to fire performance or their durability against biological agents.
This European Standard does not apply to:
- wood flooring products and parquets specifically manufactured for enhanced tactile and recognition;
- bamboo flooring products;
- laminate flooring products;
- product made with plants such as aloe or cork or coconut.
This European Standard covers wood flooring products and parquets with or without paint, varnish, lacquer, wax or oil.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation35 pagesSlovenian languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics of decking profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external use.
This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding.
It is not applicable to kits (i.e. support rail profiles, cover strip profiles and hardware) which are out of the scope of this part of EN 15534.
EN 15534 1 specifies the test methods relevant to this part of EN 15534.
NOTE 1 For load bearing applications, modification factors for bending properties are defined in CEN/TS 15534-2 [1].
NOTE 2 For editorial reasons, in EN 15534 the abbreviation "WPC" is used for "composites made from cellulose-based materials and thermoplastics".
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines and specifies the relevant characteristics and requirements of flat surface wood flooring products and parquets as well as the appropriate test methods for determination of their suitability for use as internal flooring, including fully enclosed public transport premises. The European Standards for specific wood flooring products and parquets to which this European Standard relates, and which provide product definitions and requirements for dimensional tolerances, include the following: - solid parquet elements with tongues and grooves (EN 13226); - solid lamparquet products (EN 13227); - solid wood overlay elements including blocks with an interlocking system (EN 13228); - mosaic parquet elements (EN 13488); - multi-layer parquet elements (EN 13489); - solid pre-assembled hardwood board (EN 13629); - solid softwood floor boards (EN 13990); - wood veneer floor coverings (EN 14354); - solid wood parquet - vertical finger, wide finger and module brick (EN 14761). This European Standard may also apply to other wood flooring products and parquets than those standards above. However, it does not specify any requirements for dimensional limits of tolerances of such products. This European Standard provides also for the evaluation of conformity and the requirements for marking the wood flooring products and parquets. This European Standard covers wood flooring products and parquets which may or may not be treated to improve their reaction to fire performance or their durability against biological agents. This European Standard does not apply to: - wood flooring products and parquets specifically manufactured for enhanced tactile and recognition; - bamboo flooring products; - laminate flooring products; - product made with plants such as aloe or cork or coconut. This European Standard covers wood flooring products and parquets with or without paint, varnish, lacquer, wax or oil.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation35 pagesSlovenian languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics of solid wood overlay flooring including blocks with an interlocking system for internal use as flooring. It applies to elements.
This standard covers elements with and without surface coating.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics of solid wood overlay flooring including blocks with an interlocking system for internal use as flooring. It applies to elements. This standard does not apply to panels made from elements, for which a separate standard) is in course of preparation.
This standard covers elements with and without surface coating.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard covers requirements for single untreated or preservative treated wood poles for overhead lines under cantilever or compression loading (it does not cover poles used as beams). It covers test methods, determination of characteristic values and methods of specifying durability and sizes. It also establishes principles for visual grading.
This European Standard applies to both softwood and hardwood poles.
This European Standard specifies the evaluation of conformity requirements and the marking of wood poles.
This European Standard does not specify wood poles treated against fire to improve their fire performance.
This European Standard does not quantify the service life that may be expected from a wood pole.
NOTE The service life of a wood pole depends on its geographical location, the associated climate of its service environment and either the natural durability of the heartwood of the species selected, or the combination between selection of species, preservative type, and requirements of retention and any incised zones.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation42 pagesSlovenian languagesale 10% offe-Library read for1 day
This European Standard covers requirements for single untreated or preservative treated wood poles for overhead lines under cantilever or compression loading (it does not cover poles used as beams). It covers test methods, determination of characteristic values and methods of specifying durability and sizes. It also establishes principles for visual grading. This European Standard applies to both softwood and hardwood poles. This European Standard specifies the evaluation of conformity requirements and the marking of wood poles.
This standard specifies:
- the methods of measuring the sizes of solid wood poles for overhead transmission and telecommunication lines and permissible deviations that are taken into account for the acceptance of the poles,
- the requirements for handling and the characteristics for visual strength grading of softwood and hardwood poles. It also specifies the marking requirements,
- the methods of test to determine characteristic values for modulus of elasticity and bending strength of any population of wood poles, and moisture content of solid wood poles,
- the requirements for natural durability and preservative treatment of wood poles.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation42 pagesSlovenian languagesale 10% offe-Library read for1 day
This European Standard specifies methods of determining the bending strength of wood and parquet flooring under static loads: a method with a static line load and a method with a static point load.
The methods apply to wood and parquet flooring installed on a non-continuous support and thus assuming static load-bearing conditions.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies methods of determining the bending strength of wood flooring under static load: a method with a static line load and a method with a static point load. The methods apply to wood flooring installed on a non-continuous support and thus assuming static loadbearing conditions.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification specifies the method of control and tests for glue bond performance of lamination and finger jointing processes employed in the production of timber blanks and semi-finished profiles (products) for joinery applications. The methods of control are set out to ensure the durability of the glue line according to the service class. The specific requirements for dimensions, stability and moisture content are given in EN 13307-1.
- Technical specification25 pagesEnglish languagesale 10% offe-Library read for1 day