Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard

This standard specifies the characteristics of lightweight fire resistant, unscreened, electrical cables for use in the on-board electrical systems of aircraft at operating temperature between - 65 °C and 260 °C.
Single core is UV laser printable in accordance with EN 3838; UV laser markability is not mandatory for multicore cables.

Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 C und 260 C - Teil 004: DN-Familie, ein- und mehradrige Leitungen UV-laser-bedruckbar - Gewichtsoptimiert - Produktnorm

Diese Norm legt die Anforderungen an gewichtsoptimierte, feuerbeständige, ungeschirmte elektrische Leitungen zur Verwendung in elektrischen Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen  65 °C und 260 °C fest.
Einadrige Leitungen sind nach EN 3838 mit UV Laser bedruckbar; die Kennzeichnung durch UV Laser ist bei mehradrigen Leitungen nicht zwingend vorgeschrieben.

Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 C et 260 C - Partie 004 : Famille DN, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit

Aeronavtika - Električni, ognjevzdržni kabli - Delovne temperature med -65 °C in 260 °C - 004. del: Družina DN, snop enožilnih in večžilnih kablov z možnostjo UV-laserskega tiskanja - Lahki kabli - Standard za proizvod

General Information

Status
Published
Publication Date
13-Jun-2006
Withdrawal Date
30-Dec-2006
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
01-Jun-2017

Buy Standard

Standard
EN 2346-004:2009
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2346-004:2009
01-februar-2009
$HURQDYWLND(OHNWULþQLRJQMHY]GUåQLNDEOL'HORYQHWHPSHUDWXUHPHGƒ&LQ
ƒ&GHO'UXåLQD'1VQRSHQRåLOQLKLQYHþåLOQLKNDEORY]PRåQRVWMR89
ODVHUVNHJDWLVNDQMD/DKNLNDEOL6WDQGDUG]DSURL]YRG
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65
C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly -
Light weight - Product standard
Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen
zwischen - 65 C und 260 C - Teil 004: DN-Familie, ein- und mehradrige Leitungen UV-
laser-bedruckbar - Gewichtsoptimiert - Produktnorm
Série aérospatiale - Câbles électriques résistant au feu - Températures de
fonctionnement comprises entre - 65 C et 260 C - Partie 004 : Famille DN, fil simple
marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
Ta slovenski standard je istoveten z: EN 2346-004:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 2346-004:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2346-004:2009

---------------------- Page: 2 ----------------------

SIST EN 2346-004:2009


EUROPEAN STANDARD EN 2346-004

NORME EUROPÉENNE

EUROPÄISCHE NORM June 2006
ICS 49.060
English Version
Aerospace series - Cable, electrical, fire resistant - Operating
temperatures between - 65 °C and 260 °C - Part 004: DN family,
single UV laser printable and multicore assembly - Light weight -
Product standard
Série aérospatiale - Câbles électriques résistant au feu - Luft- und Raumfahrt - Feuerbeständige elektrische
Températures de fonctionnement comprises entre - 65 °C
Leitungen - Betriebstemperaturen zwischen - 65 °C und
et 260 °C - Partie 004 : Famille DN, fil simple marquable au 260 °C - Teil 004: DN-Familie, ein-und mehradrige
laser UV et éléments assemblés - Version allégée - Norme Leitungen UV-laser bedruckbar - Gewichtsoptimiert -
de produit Produktnorm
This European Standard was approved by CEN on 3 February 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2346-004:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2346-004:2009
EN 2346-004:2006 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Materials and construction.4
5 Required characteristics.5
6 Tests.6
7 Quality assurance.8
8 Designation .8
9 Identification and marking .8
10 Packaging, labelling and delivery lengths .8
11 Technical specification .8

2

---------------------- Page: 4 ----------------------

SIST EN 2346-004:2009
EN 2346-004:2006 (E)
Foreword
This European Standard (EN 2346-004:2006) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn
at the latest by December 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 2346-004:2009
EN 2346-004:2006 (E)
1 Scope
This standard specifies the characteristics of lightweight fire resistant, unscreened, electrical cables for use in
the on-board electrical systems of aircraft at operating temperature between – 65 °C and 260 °C.
Single core is UV laser printable in accordance with EN 3838; UV laser markability is not mandatory for
multicore cables.
2 Normative references
The following referenced documents are indispensable for the application
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.