EN ISO 7622-2:2015

Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:2015)

ISO 7622-2:2015 specifies a method for the determination of the tensile strength, in the longitudinal, of steel cords constituting the carcass of conveyor belts.
It applies exclusively to conveyor belts with a steel carcass.
NOTE          A method for the determination of elongation is specified in ISO 7622‑1.

Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 2: Messung der Zugfestigkeit (ISO 7622-2:2015)

Dieser Teil von ISO 7622 legt ein Verfahren fest, um die Zugfestigkeit eines Stahlseilfördergurtes in Längsrichtung zu bestimmen.
Es wird ausschließlich bei Stahlseilfördergurten angewendet.
ANMERKUNG   Ein Verfahren zur Bestimmung der Dehnung ist in ISO 7622-1 festgelegt.

Courroies transporteuses à câbles d'acier - Essai de traction dans le sens longitudinal - Partie 2: Mesurage de la résistance à la rupture (ISO 7622-2:2015)

ISO 7622-2:2015 a pour objet de vérifier, à l'aide d'un essai destructif, la résistance à la rupture des câbles d'acier constituant la carcasse des courroies transporteuses. S'agissant d'un essai destructif, il n'est utilisé qu'en cas de litige ou en l'absence de certificats de conformité délivrés par le fabricant de câbles.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev z jeklenim vložkom - Vzdolžni natezni preskus - 2. del: Merjenje natezne trdnosti (ISO 7622-2:2015)

Ta del standarda ISO 7622 določa metodo določanja natezne moči po vzdolžni osi jeklenih vložkov, ki sestavljajo trup trakov tračnih transporterjev. Uporablja se izključno za trakove tračnih transporterjev z jeklenim trupom. OPOMBA Metoda za določanje raztezka je določena v standardu ISO 7622-1.

General Information

• Status: Withdrawn
• Publication Date: 17-Nov-2015
• Withdrawal Date: 05-Jul-2022
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 1 - Technical test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Jul-2022
• Ref Project: SIST EN ISO 7622-2:2016 - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:2015)

Relations

• Replaces: EN ISO 7622-2:1995 - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984)
• Effective Date: 26-Nov-2011
• Replaced By: EN ISO 7622-2:2022 - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:2022)
• Effective Date: 15-Dec-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2016
1DGRPHãþD
SIST EN ISO 7622-2:1997
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY]MHNOHQLP
YORåNRP9]GROåQLQDWH]QLSUHVNXVGHO0HUMHQMHQDWH]QHWUGQRVWL,62

Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile
strength (ISO 7622-2:2015)
Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 2: Messung der Zugfestigkeit
(ISO 7622-2:2015)
Courroies transporteuses à câbles d'acier - Essai de traction dans le sens longitudinal -
Partie 2: Mesurage de la résistance à la rupture (ISO 7622-2:2015)
Ta slovenski standard je istoveten z: EN ISO 7622-2:2015
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7622-2
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2015
EUROPÄISCHE NORM
ICS 53.040.20 Supersedes EN ISO 7622-2:1995
English Version
Steel cord conveyor belts - Longitudinal traction test - Part
2: Measurement of tensile strength (ISO 7622-2:2015)
Courroies transporteuses à câbles d'acier - Essai de Stahlseilfördergurte - Zugversuch in Längsrichtung -
traction dans le sens longitudinal - Partie 2: Mesurage Teil 2: Messung der Zugfestigkeit (ISO 7622-2:2015)
de la résistance à la rupture (ISO 7622-2:2015)
This European Standard was approved by CEN on 31 October 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7622-2:2015 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7622-2:2015) has been prepared by Technical Committee ISO/TC 41 “Pulleys
and belts (including veebelts)” in collaboration with Technical CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 7622-2:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7622-2:2015 has been approved by CEN as EN ISO 7622-2:2015 without any
modification.
INTERNATIONAL ISO
STANDARD 7622-2
Second edition
2015-11-01
Steel cord conveyor belts —
Longitudinal traction test —
Part 2:
Measurement of tensile strength
Courroies transporteuses à câbles d’acier — Essai de traction dans le
sens longitudinal —
Partie 2: Mesurage de la résistance à la rupture
Reference number
ISO 7622-2:2015(E)
©
ISO 2015
ISO 7622-2:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 7622-2:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Test specimens. 2
5.1 General . 2
5.2 Test specimen, type A . 2
5.3 Test specimen, type B . 3
5.4 Test specimen, type C . 4
6 Conditioning of test specimens . 4
7 Procedure. 4
8 Expression of results . 5
9 Test report . 5
ISO 7622-2:2015(E)
Foreword
ISO (the International
...